Produit terminéview
The Innovair Inverter Ductless Wall Mount Mini Split System is a high-efficiency solution for both cooling and heating. Designed for optimal performance, it features advanced technology to maintain comfortable indoor temperatures while minimizing energy consumption.
- Up to 38 SEER High Efficiency with AHRI and EnergyStar Rating.
- Intelligent Defrost allows operations to operate as low as -22°F.
- 4D Air Flow allows horizontal and vertical air direction.
- Operates in either AC cooling or Heat Pump heating mode with 17 to 19 SEER Efficiency.
- Wifi Ready for easy to control access away from the system.
- Gold-Fin outdoor condenser with High Density indoor filter.
- Perfect solution for off-grid or solar projects.
- Note: Installation kit is NOT included.
Figure 1: Components of the Innovair Mini Split System, including the indoor unit, outdoor unit, remote control, and connection lines.
Configuration et installation
Proper installation is crucial for the optimal performance and longevity of your Innovair Mini Split System. It is recommended that installation be performed by a qualified HVAC professional.
Déballage et identification des composants
Carefully unbox all components. Ensure all parts listed in the packing list are present and undamaged. The indoor unit contains the mounting bracket, copper lines, and drain line.
Figure 2 : Face avant view of the Innovair indoor unit, showcasinson design élégant.
Figure 3: The outdoor condenser unit of the Innovair Mini Split System.
Line Evacuation and Refrigerant Release
Avant la libérationasing refrigerant, the lines must be properly evacuated to remove all air and moisture. This process typically involves using a vacuum pump for at least 15 minutes. After evacuation, seal the vacuum and monitor the pressure for approximately 15 minutes to ensure no leaks are present. Once confirmed, the refrigerant can be safely released into the system.
Figure 4: Illustrates the high efficiency of the Innovair system, contributing to lower electric bills.
Mode d'emploi
Your Innovair Mini Split System offers various modes and features for customized comfort.
Fonctionnement de base
Use the provided remote control to power on the unit and set your desired temperature. The display on the indoor unit will show the current temperature setting.
Figure 5: The Innovair remote control for adjusting settings.
Fonctionnalités avancées
- Intelligent Defrost: This feature allows the unit to operate efficiently even in temperatures as low as -22°F, preventing ice buildup on the outdoor coil.
- 4D Air Flow: Adjust the horizontal and vertical air direction for optimal air distribution throughout the room.
- Connectivité Wi-Fi : The unit is Wi-Fi ready, allowing you to control it remotely via a smartphone application. This feature enables convenient temperature adjustments and mode changes from anywhere.
Figure 6: Visual representation of the Intelligent Defrost mode, showing both heating and cooling capabilities.
Figure 7: The Innovair unit demonstrating Wi-Fi connectivity and control via a smartphone app.
Entretien
Regular maintenance ensures the efficiency and longevity of your Innovair Mini Split System.
Nettoyage du filtre
The indoor unit is equipped with a high-density filter. For optimal air quality and system performance, clean the air filter regularly. Refer to the detailed instructions in the full user manual for specific cleaning procedures and frequency.
Soins en unité extérieure
Keep the area around the outdoor condenser unit clear of debris, leaves, and other obstructions to ensure proper airflow. The Gold-Fin coating on the outdoor condenser provides enhanced corrosion resistance.
Dépannage
This section provides basic troubleshooting tips for common issues. For more complex problems, contact a certified technician.
L'appareil ne s'allume pas
- Check the power supply and ensure the unit is properly plugged in.
- Vérifiez que le disjoncteur n'a pas sauté.
- Assurez-vous que les piles de la télécommande ne sont pas épuisées.
Refroidissement/chauffage insuffisant
- Vérifiez que le filtre à air est propre et non obstrué.
- Ensure no objects are blocking the indoor or outdoor unit's air vents.
- Verify the temperature setting on the remote control is appropriate for the desired mode (cooling or heating).
Caractéristiques
| Attribut | Valeur |
|---|---|
| Nom de marque | Innovair |
| Dimensions du produit | 9 x 38 x 12 pouces |
| Efficacité (SEER) | 38.0 |
| Capacité | 12000 unités thermiques britanniques |
| Type d'installation | Système Split |
| Numéro de pièce | EIN10H2V32 |
| Facteur de forme | Mini-Split |
| Caractéristiques spéciales | Defrost, Wifi |
| Couleur | Blanc |
| Voltage | 230 Volts (CA) |
| Quoitage | 2500 watts |
| Réfrigérant | R 410A |
Figure 8: Dimensions of the Innovair indoor unit.
Figure 9: EnergyGuide label detailing the cooling (SEER) and heating (HSPF) efficiency ratings.
