FABER NOVA PLUS 1000 INOX Ceiling Hood User Manual

1. Introduction

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your FABER NOVA PLUS 1000 INOX ceiling hood. Please read this manual thoroughly before using the appliance and retain it for future reference. This ceiling hood is designed for efficient kitchen ventilation, offering both ductless/recirculating operation.

2. Consignes de sécurité

Respectez toujours les consignes de sécurité suivantes afin d'éviter les blessures ou d'endommager l'appareil :

• Veillez à ce que l'appareil soit installé par un technicien qualifié, conformément à la réglementation locale.
• Disconnect the power supply before performing any cleaning, maintenance, or repair work.
• Ne laissez pas les enfants utiliser ou jouer avec l'appareil.
• Assurez une ventilation adéquate de la pièce lorsque la hotte est utilisée simultanément avec des appareils à gaz ou à combustion d'autres combustibles.
• Ne pas flamber sous la hotte.
• Nettoyez régulièrement les filtres à graisse pour éviter les risques d'incendie.
• L'appareil est destiné à un usage domestique uniquement.

3. Contenu du colis

Vérifiez que tous les composants sont présents dans l'emballage :

• FABER NOVA PLUS 1000 INOX Ceiling Hood Unit
• Télécommande
• LED Lighting (pre-installed or separate)
• Installation Hardware (screws, brackets, etc. - specific items may vary)
• Manuel d'utilisation

4. Configuration et installation

The FABER NOVA PLUS 1000 INOX is an integrated ceiling-mounted hood. Professional installation is highly recommended.

4.1. Planification et préparation

• Ensure the ceiling structure can support the weight of the hood (package weight: 24 kg).
• Determine the ventilation type: ducted (external exhaust) or recirculating (filter-based). The hood supports both.
• Plan for electrical connections and ducting (if applicable).

4.2. Cotes d'installation

Refer to the technical drawing for precise measurements required for ceiling integration.

4.3. Montage

The hood features an integrated mounting type. Follow the specific instructions provided in the separate installation guide (if included) or consult a professional installer for secure ceiling integration.

5. Mode d'emploi

The FABER NOVA PLUS 1000 INOX ceiling hood is controlled via a remote control.

5.1. Marche/Arrêt

Press the power button on the remote control to turn the hood on or off.

5.2. Réglage de la vitesse du ventilateur

The hood offers 3 fan speeds. Use the speed control buttons on the remote to select the desired extraction level. Higher speeds are suitable for intense cooking, while lower speeds are for lighter tasks.

5.3. Éclairage LED

Press the light button on the remote control to switch the integrated LED lighting on or off. The LED lights provide illumination for your cooking area.

5.4. 24H Function

Activate the 24H function for continuous, low-power ventilation throughout the day. This feature helps maintain air quality by gently circulating air, even when not actively cooking. Refer to the remote control's specific button for this function.

6. Entretien

Regular maintenance ensures optimal performance and longevity of your ceiling hood.

6.1. Cleaning the Mesh Filters

The hood is equipped with mesh filters designed to trap grease. These filters should be cleaned regularly (e.g., monthly, depending on usage) to maintain extraction efficiency and prevent fire hazards.

• Suppression: Carefully unlatch and remove the mesh filters from the hood.
• Nettoyage: Wash the filters by hand in hot soapy water or in a dishwasher. Ensure they are completely dry before re-installation.
• Réinstallation: Remettez les filtres secs en place en vous assurant qu'ils sont bien enclenchés.

6.2. Cleaning the Hood Exterior

Clean the brushed stainless steel exterior with a soft cloth and a non-abrasive cleaner specifically designed for stainless steel. Avoid harsh chemicals or abrasive pads that could scratch the surface.

6.3. Remplacement des ampoules LED

If an LED light fails, contact a qualified technician or FABER customer support for replacement. Do not attempt to replace the LED modules yourself unless specifically instructed by the manufacturer.

7. Dépannage

Avant de contacter le service client, review Voici les problèmes courants et leurs solutions :

• Le capot ne s'allume pas : Check if the appliance is properly plugged into a power outlet. Verify the circuit breaker. Ensure the remote control batteries are not depleted.
• Performances d'extraction médiocres : Clean the mesh filters. Ensure there are no obstructions in the ducting (if ducted). Check if the fan speed is set appropriately for the cooking intensity.
• Bruit inhabituel : Check for loose components or objects inside the hood. Ensure the filters are correctly installed.
• Les lumières ne fonctionnent pas : Check if the light function is activated via the remote. If individual LEDs are out, they may need replacement by a technician.

If the problem persists after attempting these solutions, contact FABER customer support.

8. Spécifications

9. Garantie et assistance

For warranty information, please refer to the documentation provided with your purchase or contact FABER customer service directly. Information regarding the availability of spare parts is not explicitly provided in the product details. For technical support, spare parts, or service inquiries, please contact your retailer or the official FABER support channels.