Introduction
The VOX VFS3 is a dedicated 3-button footswitch designed to enhance the functionality and control of your VOX Mini Go series amplifier. This footswitch allows for hands-free operation of various amplifier features, such as program switching, effect on/off, or looper control, depending on your specific Mini Go amplifier model. This manual provides essential information for the proper setup, operation, and maintenance of your VFS3 footswitch.
Consignes de sécurité
- N'exposez pas l'appareil à la pluie ou à l'humidité.
- Évitez de placer l’appareil à proximité de sources de chaleur ou en plein soleil.
- Ne tentez pas de démonter ni de modifier l'appareil. Confiez toute réparation à un personnel qualifié.
- Use only with compatible VOX Mini Go amplificateurs.
- Tenir hors de portée des enfants.
Contenu du colis
- VOX VFS3 3-Button Footswitch (with integrated cable)
- Manuel de l'utilisateur (ce document)
Produit terminéview
The VFS3 footswitch features three robust buttons, each with an associated LED indicator, and an integrated cable for connection to your amplifier.
Devant view of the VOX VFS3 3-Button Footswitch. It features three silver footswitches labeled 1, 2, and 3, each with a corresponding LED indicator above it. The VOX logo is on the left, and 'VFS3' is on the bottom right.
Côté view of the VOX VFS3 footswitch, highlighting its compact and durable metal casing.
Dos view of the VOX VFS3 footswitch, displaying the integrated cable that connects to the amplifier. The VOX logo is prominently featured.
Installation
- Connect the Footswitch: Locate the footswitch input jack on your VOX Mini Go amplifier. This is typically a 3.5mm (1/8-inch) stereo jack.
- Insérez le câble : Firmly insert the integrated 3.5mm cable from the VFS3 footswitch into the footswitch input jack on your Mini Go amplifier.
- Mise sous tension : Turn on your VOX Mini Go amplifier. The footswitch is powered by the amplifier, so no external power supply is needed for the VFS3.
- Vérifiez la connexion : Le amplifier should recognize the footswitch. Refer to your Mini Go amplifier's manual for specific indications or settings related to footswitch connection.
The VOX VFS3 footswitch connected to a VOX Mini Go amplifier, illustrating the proper connection of the cable to the ampPrise d'entrée de l'amplificateur.
Mode d'emploi
The specific functions controlled by the VFS3 footswitch buttons (1, 2, and 3) are determined by the connected VOX Mini Go amplifier model and its current settings. Please consult the user manual for your specific VOX Mini Go amplifier for detailed information on footswitch assignments and configuration.
Common Functions (May Vary by Amplifier Model):
- Program/Preset Switching: Buttons may be assigned to switch between amplifier programs or presets (e.g., Clean, Overdrive, Distortion).
- Effet activé/désactivé : Control individual effects (e.g., Reverb, Delay, Chorus) by toggling them on or off.
- Contrôle du looper : For Mini Go models with a built-in looper, the buttons often control looper functions such as:
- Bouton 1 : Enregistrer/Lire
- Bouton 2 : Arrêt
- Bouton 3 : Clear/Undo
- Tap Tempo: Quelques amplifiers may allow one of the buttons to be used for tap tempo functionality for time-based effects.
The LEDs above each button indicate the status of the assigned function (e.g., effect on/off, selected program). Refer to your amplifier's manual for the meaning of specific LED colors or states.
Entretien
- Nettoyage: Essuyez l'appareil avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs, de cires ni de solvants.
- Stockage: When not in use for extended periods, store the footswitch in a clean, dry environment away from extreme temperatures.
- Entretien des câbles : Avoid sharp bends or kinks in the integrated cable to prevent damage.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La pédale ne répond pas | Câble non complètement inséré ; Amplifier not powered on; Incorrect ampparamètres de lifier. | Ensure the 3.5mm cable is securely connected to the amplifier. Verify the amplifier is powered on. Check your Mini Go amplifier's settings to ensure footswitch control is enabled and configured correctly. |
| Les LED ne s'allument pas | No power from amplifier; Faulty connection. | Confirmer le amplifier is on and the cable is properly connected. The footswitch draws power from the amplifier. |
| Buttons perform unexpected functions | Footswitch assignments are incorrect on the amplifier. | Refer to your VOX Mini Go amplifier's manual to reconfigure the footswitch button assignments. |
Caractéristiques
- Modèle: VFS3
- Appareils compatibles : VOX Mini Go Amplifier
- Type de connecteur : 3.5mm Jack (integrated cable)
- Matériel: Châssis métallique
- Dimensions (L x l x H) : Environ 7.9 x 3 x 2.5 pouces (20.1 x 7.6 x 6.4 cm)
- Poids: Environ 1.1 livre (0.5 kg)
- Source d'alimentation : Powered by connected amplifier
Garantie et assistance
For warranty information and technical support, please refer to the documentation provided with your VOX Mini Go amplifier or visit the official VOX webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat.