1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Illustration 1.1 : Avant view of the SEBSON Outdoor Motion Detector.
2. Consignes de sécurité
Respectez toujours les consignes de sécurité suivantes afin d'éviter les blessures ou d'endommager l'appareil :
- Sécurité électrique : Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Voltage: Assurer le vol de fonctionnementtage of 230V AC matches your electrical supply.
- Classement IP44 : This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Montage: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- Enfants: Conserver les matériaux d'emballage et les petites pièces hors de portée des enfants.
3. Contenu du colis
Le forfait comprend:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Produit terminéview et fonctionnalités
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Portée de détection : Up to 12 meters with a 180° infrared sensor.
- Adjustable Sensor Head: Can be swiveled vertically by 300° for precise area coverage.
- Adjustable Illumination Duration (TIME): From 10 seconds to 7 minutes.
- Adjustable Ambient Brightness (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- Compatibilité LED : Prend en charge les LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Conception durable : IP44 rated for outdoor use, anthracite color, made of plastic.
Image 4.1 : Terminéview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Configuration et installation
Suivez ces étapes pour une installation correcte :
- Préparez l'installation : Avant de commencer, assurez-vous que l'alimentation électrique principale de la zone d'installation est coupée au niveau du disjoncteur.
- Choisissez l'emplacement de montage : Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Montage de la base :
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Percez des trous aux endroits marqués. Insérez les chevilles appropriées si nécessaire.
- Secure the detector's base firmly to the wall using screws.
- Connexions de câblage : Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Image 5.1 : Example wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Logements proches : Carefully close the detector housing, ensuring no wires are pinched.
- Restaurer l'alimentation : Une fois l'installation terminée et toutes les connexions sécurisées, rétablissez l'alimentation électrique principale.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Instructions d'utilisation et réglages
The motion detector features two adjustable dials for customizing its operation:
Image 6.1 : Gros plan view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Tournez le cadran vers le icône du soleil for activation in brighter conditions (e.g., during the day).
- Tournez le cadran vers le icône de la lune for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Entretien
To ensure optimal performance and longevity of your motion detector:
- Nettoyage: Regularly clean the sensor lens and the outer casing avec un goût doux, sec ou légèrement damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- Inspection: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Facteurs environnementaux : Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
8. Dépannage
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas lorsqu'un mouvement est détecté. |
|
|
| La lumière reste allumée en permanence ou s'allume de façon aléatoire. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Fabricant | SEBSON |
| Numéro de modèle | IR_OUT_BA |
| Dimensions du produit (L x l x H) | 8.6 x 6 x 9.6 cm |
| Poids | 155 gramme |
| Couleur | Anthracite |
| Matériel | Plastique |
| Source d'énergie | AC |
| Voltage | 230 volts |
| Max. Power (LED) | 300 watts |
| Max. Power (Incandescent) | 1200 watts |
| Méthode d'installation | Montage mural (montage en surface) |
| Compatibilité des types d'ampoules | DIRIGÉ |
| Portée de détection | 12m / 180° |
| Swiveling Angle | 300° (vertical) |
| Illumination Duration (TIME) | 10 secondes - 7 minutes |
| Ambient Brightness (LUX) | 3 - 2000 lux |
| Indice de protection IP | IP44 |
| Utilisations recommandées | De plein air |
| Température maximale nominale | 40 degrés Celsius |
| Pays d'origine | Chine |
10. Garantie et assistance
Politique de retour: This product is eligible for returns within 30 days of purchase, in accordance with the retailer's return policy.
Assistance clientèle : For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
