Introduction
This manual provides instructions for the setup, operation, and maintenance of your Mooas Dual LED Moon Night Light Digital Alarm Clock (Model: MC-RLEDW2R). Please read this manual thoroughly before using the product to ensure proper function and longevity.
Figure 1: Mooas Dual LED Moon Night Light Digital Alarm Clock
Informations importantes sur la sécurité
- N’exposez pas l’appareil à l’eau ou à une humidité excessive.
- Évitez de placer l'appareil à proximité de sources de chaleur ou à la lumière directe du soleil.
- Utilisez uniquement l'adaptateur secteur et les câbles fournis.
- Tenir hors de portée des enfants.
- N'essayez pas de démonter ou de réparer l'appareil vous-même. Contactez le service client pour obtenir de l’aide.
Contenu du colis
Vérifiez que tous les éléments sont présents dans votre colis :
- Mooas Dual LED Moon Night Light Digital Alarm Clock
- Télécommande
- Adaptateur secteur (câble USB et adaptateur mural)
- Manuel de l'utilisateur (ce document)
- CR2032 Battery (pre-installed for time memory)
Installation
1. Connexion électrique
- Connectez le câble USB fourni au port d'entrée d'alimentation de l'horloge.
- Plug the other end of the USB cable into the wall adapter.
- Insert the wall adapter into a standard electrical outlet.
- L'affichage de l'horloge s'illuminera.
Note: A CR2032 battery is pre-installed to maintain time settings during power outages. Ensure any protective tab is removed from the battery compartment if the clock does not retain time after initial setup.
2. Configuration de la télécommande
The remote control is used for all settings and operations. It may have a protective plastic tab that needs to be removed from the battery compartment before first use.
Figure 2: Remote Control for the Mooas Clock
The remote control can be magnetically attached to the base of the clock for convenient storage.
Mode d'emploi
1. Réglage de l'heure et de la date
Use the remote control to adjust time and date settings.
- Définir l'heure : Press the "Time Set" button on the remote. Use the arrow buttons to adjust hours and minutes. Press "Time Set" again to confirm.
- Régler la date: Press the "Date Set" button. Use arrow buttons to adjust year, month, and day. Press "Date Set" again to confirm.
- Mode 12/24 heures : Press the "12/24H" button to switch between 12-hour and 24-hour display formats.
2. Fonction d'alarme
- Régler l'alarme: Press the "Alarm Set" button. Use arrow buttons to set the desired alarm time. Press "Alarm Set" again to confirm.
- Activer/Désactiver l'alarme : Press the "Alarm ON/OFF" button to toggle the alarm. An alarm icon will appear on the display when active.
- Répéter: When the alarm sounds, press the "Snooze" button on the remote to temporarily silence it. The alarm will sound again after a set interval (typically 5-10 minutes).
- Arrêter l'alarme : To stop the alarm completely, press any other button on the remote or the "Alarm ON/OFF" button.
3. Adjusting Clock Display Brightness
The clock display has three brightness levels (High, Medium, Low).
- Press the "Clock Brightness" button on the remote control to cycle through the brightness levels.
Figure 3: Clock Display with White LED
Figure 4: Clock Display with Orange LED
4. Fonction veilleuse
The moon night light offers 7 distinct colors and an automatic color change mode.
- Changer de couleur : Press the "LED Color" button on the remote control to cycle through blue, sky blue, green, yellow, red, purple, white, and RGB auto change mode.
- Luminosité de la veilleuse : The night light brightness is not independently adjustable via remote.
- Mode de gradation automatique : The clock features an automatic dimming mode where the night light's color and brightness will automatically adjust to a dimmer setting during a specified time period (default: 6:00 PM to 6:00 AM). This setting can be customized using the remote control. Refer to the remote control's specific buttons for "Auto Dim Set" or similar.
Figure 5: Available Night Light Colors
5. Modes d'utilisation
The device can be used in various configurations:
- Mode horloge: Only the digital clock display is active.
- Mode veilleuse: Only the moon night light is active.
- Clock + Night Light Mode: Both the digital clock and the moon night light are active simultaneously.
Specific buttons on the remote control allow switching between these modes. Consult the remote for labels such as "Mode" or dedicated ON/OFF buttons for clock and night light.
Figure 6: Wall-mounted usage example
Figure 7: Desk clock usage example
Entretien
- Nettoyage: Essuyez l'appareil avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
- Remplacement de la pile (télécommande) : If the remote control's functionality decreases, replace its battery (type not specified, usually CR2025 or CR2032).
- Time Memory Battery (CR2032): The CR2032 battery for time memory typically lasts several years. If the clock loses time settings after a power outage, replace this battery.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'affichage de l'horloge est éteint ou ne fonctionne pas. | Pas d'alimentation, connexion défectueuse, problème d'adaptateur secteur. | Ensure power cable is securely connected. Check if the power adapter is plugged into a working outlet. Try a different USB port or adapter if available. |
| La télécommande ne répond pas. | Remote battery is dead or protective tab is still in place. | Remove the protective plastic tab from the remote's battery compartment. Replace the remote control battery if necessary. Ensure you are within range and pointing the remote at the clock. |
| Clock loses time settings after power outage. | CR2032 memory battery is dead or protective tab is still in place. | Ensure the protective tab is removed from the CR2032 battery compartment. Replace the CR2032 battery. |
| La veilleuse ne change pas de couleur. | Incorrect mode selected or remote issue. | Ensure the night light is active and not in a fixed color mode. Press the "LED Color" button repeatedly to cycle through colors. Check remote functionality. |
Caractéristiques
| Marque | mooas |
| Numéro de modèle | MC-RLEDW2R |
| Couleur | Blanc |
| Dimensions (L x l x H) | 30.71 x 25.17 x 5.36 cm (12.09 x 9.91 x 2.11 pouces) |
| Poids de l'article | 508 g (1.12 lb) |
| Matériel | Acrylic, ABS Acrylic |
| Type de source lumineuse | DIRIGÉ |
| Clock Display Colors | Blanc, orange |
| Couleurs de la veilleuse | Blue, Sky Blue, Green, Yellow, Red, Purple, White, RGB Auto Change |
| Source d'énergie | AC Powered (with CR2032 battery for time memory) |
| Caractéristiques spéciales | Alarm, Adjustable Brightness (for clock display), Date Display, 12/24H Mode, Snooze, Remote Control |
Informations sur la garantie
Mooas products are covered by a limited warranty against defects in materials and workmanship. The specific warranty period may vary by region and retailer. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact Mooas customer support.
Assistance clientèle
If you encounter any issues or have questions regarding your Mooas Dual LED Moon Night Light Digital Alarm Clock that are not addressed in this manual, please contact Mooas customer support. Contact information can typically be found on the product packaging or the official Mooas website.
Pour obtenir une assistance en ligne, visitez : www.mooas.com
