Produit terminéview
The Milesight MS-C2972-FIPB is a 2MP Pro Dome IP Day/Night Network Camera designed for robust surveillance applications. It features remote focus and zoom capabilities, an IK10 vandal-proof and IP66 weather-resistant casing, and advanced imaging technologies like 140 dB WDR (Wide Dynamic Range) and Smart IR II for superior image quality in varying light conditions.
This camera supports H.265 video compression for efficient storage and bandwidth usage, and includes a 256GB MicroSD card slot for on-board storage. It is fully ONVIF compliant, ensuring broad compatibility with various network video recorders (NVRs) and video management systems (VMS).
Caractéristiques principales
- Zoom et mise au point motorisés : Allows for remote adjustment of the camera's field of view et la netteté.
- IK10 Vandal-proof & IP66 Weather-resistant: Ensures durability and protection against impact and harsh environmental conditions, suitable for outdoor use.
- 140 dB WDR: Provides clear images in scenes with strong contrast, such as bright backlighting.
- Smart IR II: Advanced infrared technology for uniform illumination in low-light conditions, preventing overexposure of close objects.
- Compression H.265+ : Reduces bandwidth and storage requirements significantly compared to older compression standards.
- 256GB MicroSD Support: Enables on-board storage for local recording and redundancy.
- Full ONVIF Compliance: Ensures interoperability with a wide range of surveillance equipment.
- SIP/VoIP Support: Integrates voice and video over IP for enhanced communication capabilities.
Configuration et installation
Contenu du colis
Avant de commencer l'installation, assurez-vous que tous les composants sont présents :
- Milesight MS-C2972-FIPB IP Camera
- Gabarit de montage
- Vis de fixation et chevilles
- Connecteur étanche pour câble Ethernet
- Guide de démarrage rapide
Montage de la caméra
The MS-C2972-FIPB is designed for ceiling mount installation. Follow these steps:
- Préparez la surface de montage : Choose a suitable location on a ceiling or wall that can support the camera's weight and provides the desired field of view.
- Detach the Mounting Plate: Rotate the camera body counter-clockwise to detach it from the mounting plate. This plate will be secured to the surface first.
- Marquer les trous de perçage : Use the provided mounting template to mark the positions for drilling holes on the mounting surface.
- Trous de forage : Drill holes according to the marked positions. Insert wall plugs if mounting on a masonry surface.
- Plaque de montage sécurisée : Attach the mounting plate to the surface using the provided screws.
- Connecter les câbles : Route the Ethernet cable through the mounting plate and connect it to the camera's RJ45 port. Ensure a waterproof connection using the supplied connector for outdoor installations. If not using PoE, connect the DC12V power supply.
- Fixer le boîtier de l'appareil photo : Align the camera body with the mounting plate and rotate clockwise until it locks securely into place.
Network Connection and Initial Setup
The camera supports Power over Ethernet (PoE) for simplified installation, requiring only one Ethernet cable for both power and data. Alternatively, it can be powered by a 12V DC adapter.
- Se connecter au réseau : Connect the camera to your network switch or router using an Ethernet cable. If using PoE, ensure your switch supports PoE (802.3af).
- Découvrez l'appareil photo : Use the Milesight Smart Tools software (available on the Milesight website) pour découvrir la caméra sur votre réseau.
- Attribuer une adresse IP : Assign a static IP address or configure DHCP for the camera.
- Accéder Web Interface: Ouvrir un web Dans votre navigateur, saisissez l'adresse IP de la caméra pour y accéder. web interface.
- Connexion initiale : Log in using the default username and password (refer to the Quick Start Guide for default credentials). It is highly recommended to change the default password immediately for security.
- Mise à jour du firmware: Vérifiez et installez les mises à jour du micrologiciel disponibles afin de garantir des performances et une sécurité optimales.
Utilisation de l'appareil photo
Remote Focus and Zoom
The MS-C2972-FIPB features a motorized varifocal lens, allowing you to adjust the zoom and focus remotely from the camera's web interface or compatible NVR/VMS software. This eliminates the need for manual adjustment at the camera's physical location.
Configuration vidéo
Access the "Video" settings in the web interface à configurer :
- Résolution: Up to 1920x1080 (2MP).
- Fréquence d'images : Adjust for desired smoothness of video.
- Compression: Select H.265+, H.265, H.264+, H.264, or MJPEG. H.265+ is recommended for efficiency.
- Débit binaire : Configure constant (CBR) or variable (VBR) bit rates.
- Paramètres de l'image : Adjust brightness, contrast, saturation, sharpness, WDR, and noise reduction.
- Masquage de confidentialité: Define up to 8 areas to be masked for privacy concerns.
Configuration audio
The camera includes a built-in microphone and supports two-way audio via an audio output interface. Configure audio settings under the "Audio" section:
- Compression Audio: G.711, AAC, G.722, G.726.
- Gain du microphone: Adjust sensitivity of the built-in microphone.
- Audio bidirectionnel: Enable and configure for interactive communication.
Stockage et enregistrement
The camera supports local storage on a MicroSD card up to 256GB. Configure recording schedules, motion detection recording, and continuous recording options in the "Storage" settings.
SIP/VoIP Integration
The MS-C2972-FIPB supports SIP/VoIP for voice and video-over-IP functionality. This allows for integration with VoIP systems for advanced communication and monitoring. Refer to the "System" or "Network" settings for SIP/VoIP configuration.
Entretien
Nettoyage
- Lens and Dome Cover: Regularly clean the camera lens and the transparent dome cover with a soft, clean cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical surfaces. Avoid harsh chemicals that could damage the coating.
- Corps de la caméra : Essuyez le boîtier de l'appareil photo avec de l'eau.amp chiffon pour enlever la poussière et la crasse.
Mises à jour du firmware
Consultez régulièrement le site officiel de Milesight. website for new firmware versions. Keeping the firmware updated ensures optimal performance, introduces new features, and addresses potential security vulnerabilities.
- Téléchargez le dernier firmware file from the Milesight support page.
- Accédez aux web Accédez à l'interface et naviguez jusqu'à la section « Système » ou « Maintenance ».
- Follow the on-screen instructions to upload and install the firmware. Do not power off the camera during the update process.
Considérations environnementales
Although the camera is IP66 rated for weather resistance, extreme conditions can still affect performance. Ensure proper drainage around the camera if installed in areas prone to heavy rain or snow accumulation. Avoid direct exposure to prolonged strong sunlight if possible, as this can affect image quality and component lifespan.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La caméra ne s'allume pas. | Pas d'alimentation électrique ; PoE non actif ; câble défectueux. | Check power adapter/PoE switch. Ensure Ethernet cable is properly connected and functional. |
| Impossible d'accéder à la caméra via web navigateur. | Adresse IP incorrecte ; problème de connectivité réseau ; blocage par pare-feu. | Verify IP address. Check network cable. Temporarily disable firewall on PC. Use Milesight Smart Tools to discover camera. |
| Mauvaise qualité d'image (floue, sombre, surexposée). | Lens out of focus; incorrect image settings; dirty lens/dome; insufficient IR illumination. | Adjust focus remotely. Configure brightness, contrast, WDR, and IR settings. Clean lens and dome cover. |
| No video recording to MicroSD card. | MicroSD card full/faulty; recording schedule not configured; motion detection not triggered. | Check MicroSD card status and format if necessary. Verify recording schedule and motion detection settings. |
| Vandalism or physical damage. | External impact. | The camera is IK10 vandal-proof, but extreme force can still cause damage. Contact support for repair options. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | MS-C2972-FIPB |
| Capteur d'images | Capteur CMOS à balayage progressif 1/2.8" |
| Résolution d'image max. | 1920x1080 (2MP) |
| Éclairage minimum | Color: 0.002Lux@F1.2; B/W: 0Lux with IR on |
| Type de lentille | Motorized P-IRIS varifocal 3.0~10.5mm (Optional: 2.7~13.5mm/ 7~22mm) |
| Distance IR | Up to 50m (3.0~10.5mm lens); Up to 90m (7~22mm lens) |
| Compression vidéo | H.265+/ H.265(HEVC)/ H.264+/ H.264/MJPEG |
| Le WDR | 140 dB Super WDR |
| E/S audio | Microphone intégré et 1 interface de sortie audio |
| Stockage | Support micro SD/SDHC/SDXC Card, up to 256GB |
| Interfaces réseau | 1 port Ethernet RJ45 10 M/100 M. |
| Compatibilité du système | ONVIFProfile G&Q&S&T, API |
| Alimentation électrique | PoE (802.3af) / DC12V±10% |
| Consommation d'énergie | 8W Max; 12W Max (With IR on) |
| Dimensions | Φ143mm x 108.4mm (5.63 x 4.27 x 4.27 inches) |
| Poids | Environ 3.28 livres |
| Protection contre les intrusions | IP66 |
| Résistance au vandalisme | IK10 |
Garantie et assistance
Specific warranty details for the Milesight MS-C2972-FIPB camera are typically provided at the point of purchase or can be found on the official Milesight webVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
For technical support, product inquiries, or service requests, please visit the official Milesight support portal or contact their customer service. Contact information is usually available on the manufacturer's website.
Note: This manual provides general guidance. For detailed technical specifications and advanced configurations, please refer to the complete product documentation available on the Milesight official website.
