1. Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of the Hanwha SBP-122HMW Security Camera Mount and Housing. Please read this manual thoroughly before using the product to ensure proper setup and to prevent damage or injury. Keep this manual for future reference.
2. Produit terminéview
The Hanwha SBP-122HMW is a robust mount and housing designed to securely install and protect compatible security cameras. It provides a stable platform for camera placement, ensuring optimal surveillance coverage and protection from environmental elements.
Figure 1 : Hanwha SBP-122HMW Security Camera Mount and Housing. This image shows the complete assembly of the mount and housing unit, highlighting its design for camera integration.
3. Contenu du colis
Vérifiez que tous les composants sont présents dans le package avant de procéder à l'installation :
- SBP-122HMW Mount and Housing Unit
- Vis et ancrages de montage
- Modèle d'installation (le cas échéant)
- Guide de démarrage rapide
4. Consignes de sécurité
Veuillez respecter les consignes de sécurité suivantes :
- Ensure the mounting surface can support the weight of the mount, housing, and camera.
- Utilisez les outils appropriés pour l'installation.
- Disconnect power to any associated electrical components before installation or maintenance.
- Avoid contact with sharp edges during handling.
- Tenir hors de portée des enfants.
5. Configuration et installation
Suivez ces étapes pour une installation correcte :
- Préparez la surface de montage : Choose a sturdy location suitable for the camera's field of view. Ensure the surface is clean and dry.
- Points de forage marqués : Use the provided template (if available) or the mount itself to mark the drilling points on the wall or ceiling.
- Trous de forage : Drill pilot holes at the marked locations. Insert wall anchors if necessary for your mounting surface.
- Fixer le support : Securely fasten the SBP-122HMW mount to the surface using the provided screws. Ensure it is firmly attached and stable.
- Installez la caméra : Follow your camera's specific instructions to install it within the SBP-122HMW housing. Connect any necessary cables.
- Ajuster l'angle de la caméra : Once the camera is secured, adjust its angle and orientation for optimal coverage. Tighten all adjustment screws to lock the position.
6. Mode d'emploi
The SBP-122HMW is a passive mounting and housing unit. Its primary function is to provide a stable and protective enclosure for your security camera. Operation primarily involves ensuring the camera is correctly positioned and secured.
- Réglage de l'angle : Loosen the adjustment screws on the mount to change the camera's viewing angle. Re-tighten securely once the desired angle is achieved.
- Gestion des câbles: Ensure all cables are routed properly through the designated openings to prevent damage and maintain weather resistance.
7. Entretien
Regular maintenance helps ensure the longevity and performance of your SBP-122HMW mount and housing:
- Nettoyage: Periodically wipe the exterior of the housing with a soft, damp Chiffon. Évitez les nettoyants abrasifs ou les solvants.
- Inspection: Annually inspect all mounting screws and connections to ensure they remain tight. Check for any signs of wear, corrosion, or damage to the housing.
- Sceaux météorologiques : Ensure all weather seals (if applicable) are intact and free from cracks or damage to maintain environmental protection for the camera.
8. Dépannage
En cas de problème, reportez-vous aux étapes de dépannage courantes suivantes :
- Le support est desserré : Re-tighten all mounting screws. Ensure the mounting surface is stable and appropriate anchors were used.
- Caméra View Obstrué : Check for any debris on the housing's transparent cover or adjust the camera's position.
- Water/Moisture Inside Housing: Inspect all seals and cable entry points for damage. Ensure cables are properly sealed.
For issues related to the camera itself, refer to the camera's specific user manual.
9. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | SBP-122HMW |
| Dimensions du produit | 3.94 x 3.94 x 0.79 pouces |
| Poids de l'article | 5.6 onces |
| Fabricant | HANWHA |
| ASIN | B08N5H6SW2 |
10. Garantie et assistance
For warranty information and technical support, please refer to the official HANWHA webConsultez leur site web ou contactez leur service client. Conservez votre reçu d'achat comme preuve d'achat.
Remarque : Les conditions de garantie spécifiques peuvent varier selon la région et le détaillant.
