PreSonus PD-70 Dynamic Broadcast Microphone and Rockville PRO-M50 Studio Headphones User Manual

Introduction

This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your PreSonus PD-70 Dynamic Broadcast Microphone and Rockville PRO-M50 Studio Headphones. Please read this guide thoroughly before using your equipment to ensure optimal performance and longevity.

Installation

1. PreSonus PD-70 Microphone Setup

The PD-70 is a dynamic cardioid microphone designed for broadcast and recording applications. It features an end-address design and requires an XLR cable connection to an audio interface or mixer with a microphone preamp.

Montage du microphone : Secure the PD-70 to a microphone stand using its integrated hard mount. Ensure the microphone is stable and positioned correctly for your recording environment.
Connexion du microphone : Connect a standard XLR cable to the 3-pin XLR connector located at the bottom of the PD-70. Connect the other end of the XLR cable to an available microphone input on your audio interface or mixer.
Mise sous tension : The PD-70 is a passive dynamic microphone and does not require phantom power. Ensure your audio interface or mixer is powered on and configured for the correct input.

Bas view of the PreSonus PD-70 microphone showing the XLR connector.

Image : Bas view of the PreSonus PD-70 microphone, highlighting the 3-pin XLR connector for audio input.

PreSonus PD-70 microphone set up on a stand in a studio environment.

Image: The PreSonus PD-70 microphone mounted on a stand, connected to an audio setup in a studio environment.

2. Rockville PRO-M50 Studio Headphones Setup

The PRO-M50 headphones are designed for studio monitoring, offering accurate sound reproduction and sound isolation.

Connexion du câble : Attach the detachable 51-inch coiled cable to the headphone's input jack. Ensure it is securely connected.
Connexion à la source audio : Plug the gold-plated 3.5mm connector into your audio device (e.g., audio interface, mixer, computer). If your device requires a 1/4-inch connection, use the included gold-plated adapter.
Interchangeable Ear Cushions: The PRO-M50 comes with both soft suede and leather ear cushions. You can interchange them based on your comfort preference. To change, gently pull off the current cushion and snap the desired cushion into place.

Rockville PRO-M50 Studio Headphones with detachable cable, 3.5mm to 1/4 inch adapter, and extra ear pads.

Image: Rockville PRO-M50 Studio Headphones displayed with their accessories, including the detachable coiled cable, 3.5mm to 1/4 inch adapter, and interchangeable ear cushions.

Mode d'emploi

PreSonus PD-70 Microphone Usage

Positionnement : The PD-70 is an end-address microphone. Speak directly into the top of the microphone for optimal sound capture.
Diagramme polaire cardioïde: This microphone features a cardioid polar pattern, meaning it primarily picks up sound from the front and rejects sound from the sides and rear. This helps minimize background noise and room reverberation.
Effet de proximité : Moving closer to the microphone will increase bass response, known as the proximity effect. Experiment with distance to achieve your desired vocal tone.
Integrated Windscreen: The built-in windscreen helps reduce plosive sounds (P, B sounds) and breath noise.

Rockville PRO-M50 Studio Headphones Usage

Confort et ajustement : Adjust the headband for a comfortable and secure fit. The ergonomically designed swivel ear cups allow for single-ear monitoring if needed.
Isolation acoustique : The closed-back, circumaural design provides supreme sound isolation, minimizing sound bleed and external noise interference during monitoring.
Surveillance: These headphones are designed for accurate sound reproduction with a flat frequency curve, ideal for critical listening and mixing in a studio environment.

Entretien

Soins généraux

Nettoyage: Use a soft, dry cloth to clean the exterior surfaces of both the microphone and headphones. Avoid using harsh chemicals or abrasive materials.
Stockage: When not in use, store the equipment in a clean, dry place, away from extreme temperatures and humidity. The PRO-M50 headphones include a hard leather carrying case for protection during storage and transport.

Headphone Specific Maintenance

Entretien des câbles : Handle the detachable coiled cable carefully. Avoid sharp bends or excessive pulling to prevent damage.
Remplacement des coussinets d'oreille : The ear cushions are interchangeable and can be replaced if they become worn or damaged. Replacement cushions can be obtained from authorized Rockville dealers.

Dépannage

Problèmes de microphone

Pas de son :
- Ensure the XLR cable is securely connected at both the microphone and the audio interface/mixer.
- Verify that the input gain on your audio interface/mixer is turned up.
- Check that the correct input is selected on your audio software or device.
Son déformé :
- Reduce the input gain on your audio interface/mixer to prevent clipping.
- Ensure you are not speaking too close to the microphone, which can cause overload.

Headphone Issues

Pas de son :
- Ensure the headphone cable is fully inserted into both the headphones and the audio source.
- Vérifiez le niveau de volume de votre source audio.
- If using the 1/4-inch adapter, ensure it is securely attached to the 3.5mm plug.
Sound from One Side Only:
- Check the cable connections at both ends.
- Test the headphones with another audio source to rule out a device issue.

Caractéristiques