Jamo C912

Manuel d'utilisation du caisson de basses Jamo C912

Modèle: C912

1. Introduction

Merci pour votre achatasing the Jamo C912 Subwoofer. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your subwoofer. Please read this manual thoroughly before using the product and retain it for future reference.

The Jamo C912 Subwoofer features a 12-inch front-firing polyfiber woofer and is powered by a 400W Class D amplifier. This design provides robust low-frequency sound reproduction, suitable for both music and movie playback.

2. Consignes de sécurité

Consignes de sécurité importantes :

  • Lisez ces instructions.
  • Conservez ces instructions.
  • Tenez compte de tous les avertissements.
  • Suivez toutes les instructions.
  • N’utilisez pas cet appareil à proximité de l’eau.
  • Nettoyer uniquement avec un chiffon sec.
  • Ne pas obstruer les ouvertures de ventilation. Installer conformément aux instructions du fabricant.
  • Ne pas installer à proximité de sources de chaleur telles que radiateurs, bouches de chauffage, poêles ou autres appareils (y compris amp(échangeurs thermiques) qui produisent de la chaleur.
  • Ne contrecarrez pas la fonction de sécurité de la fiche polarisée ou de mise à la terre. Une fiche polarisée possède deux broches, l'une étant plus large que l'autre. Une fiche de mise à la terre possède deux broches et une troisième broche de mise à la terre. La broche large ou la troisième broche sont fournies pour votre sécurité. Si la fiche fournie ne s'adapte pas à votre prise, consultez un électricien pour remplacer la prise obsolète.
  • Protégez le cordon d’alimentation pour éviter qu’il ne soit piétiné ou pincé, en particulier au niveau des fiches, des prises de courant et du point de sortie de l’appareil.
  • Utilisez uniquement les accessoires spécifiés par le fabricant.
  • Utiliser uniquement avec le chariot, le support, le trépied, le support ou la table spécifiés par le fabricant ou vendus avec l'appareil. Lorsqu'un chariot est utilisé, faire preuve de prudence lors du déplacement de l'ensemble chariot/appareil pour éviter toute blessure due au basculement.
  • Débranchez cet appareil en cas d’orage ou lorsqu’il n’est pas utilisé pendant de longues périodes.
  • Confiez toute réparation à un technicien qualifié. Une réparation est nécessaire lorsque l'appareil a été endommagé de quelque façon que ce soit, par exemple si le cordon d'alimentation ou la prise sont endommagés, si du liquide a été renversé ou si des objets sont tombés à l'intérieur de l'appareil, si l'appareil a été exposé à la pluie ou à l'humidité, s'il ne fonctionne pas normalement ou s'il est tombé.

3. Contenu du colis

Vérifiez que tous les articles sont présents dans l'emballage :

  • Jamo C912 Powered Subwoofer
  • Grille amovible
  • Cordon d'alimentation

4. Produit terminéview

The Jamo C912 Subwoofer is designed to enhance the low-frequency performance of your audio system. It features a front-firing woofer and port for flexible placement options.

Jamo C912 Subwoofer Front View (Grille Removed)

Figure 1 : Jamo C912 Subwoofer Front View (Grille Removed). This image displays the subwoofer from the front-right angle, showcasing the 12-inch polyfiber woofer and the front-firing port. The Jamo logo is visible on the bottom right.

Jamo C912 Subwoofer Front View (Grille intégrée)

Figure 2 : Jamo C912 Subwoofer Front View (Grille Attached). This image shows the subwoofer with its black fabric grille covering the woofer and port, providing a sleek and protected appearance.

Jamo C912 Subwoofer Rear Panel

Figure 3 : Jamo C912 Subwoofer Rear Panel. This image details the rear panel of the subwoofer, showing the various input connections and control knobs for volume, frequency (crossover), and phase adjustment, along with the power switch and AC input.

Rear Panel Controls and Connections:

  • Volume: Ajuste le niveau de sortie global du caisson de basses.
  • Fréquence (Fréquence de coupure) : Controls the upper frequency limit of the subwoofer. Adjust this to blend the subwoofer's output with your main speakers.
  • Phase: Adjusts the phase of the subwoofer output (0° or 180°) to match the phase of your main speakers.
  • Line In (L/R): RCA inputs for connecting to the L/R pre-out of your receiver/amplifier.
  • Entrée LFE : RCA input for connecting to the LFE (Low-Frequency Effects) or Subwoofer output of your receiver/amplifier.
  • Interrupteur: Allume ou éteint le caisson de basses.
  • Entrée CA : Connection for the detachable power cord.
  • Wireless Port (VOLT 2 Port): For optional wireless connectivity using the Klipsch WA2 kit (sold separately).

5. Installation

5.1 Placement

L'emplacement de votre caisson de basses a une incidence considérable sur ses performances. Tenez compte des points suivants :

  • Emplacement en coin : Placing the subwoofer in a corner often maximizes its output and provides the most bass.
  • Emplacement du mur : Placing it along a wall can also provide good bass reinforcement. Due to its front-firing port, the C912 can be placed closer to a wall or even within a cabinet, provided there is adequate ventilation.
  • Position d'écoute : Experiment with different locations in your room to find the best balance of bass response at your primary listening position.

5.2 Connexions

Before making any connections, ensure the subwoofer and your receiver/amplifier are turned off and unplugged from the power outlet.

  1. Connexion LFE (recommandée) : Connect a single RCA cable from the LFE or Subwoofer output of your receiver/amplifier to the LFE IN input on the Jamo C912 Subwoofer.
  2. Connexion RCA stéréo : Si votre récepteur/amplifier does not have an LFE output, connect RCA cables from the L/R pre-out of your receiver/amplifier to the LINE IN (L/R) inputs on the subwoofer.
  3. Connexion électrique : Once audio connections are made, connect the supplied power cord to the AC Input on the subwoofer and then to a wall outlet.

5.3 Wireless Connectivity (Optional)

The Jamo C912 Subwoofer is wireless-ready. To enable wireless operation, you will need to purchase the Klipsch WA2 Wireless Subwoofer Kit (sold separately). Follow the instructions provided with the WA2 kit for installation and pairing with your subwoofer.

6. Fonctionnement

6.1 Mise sous tension et réglage initiaux

  1. Turn on your receiver/amplifier and the Jamo C912 Subwoofer (using the Power Switch on the rear panel).
  2. The LED indicator on the front of the subwoofer will glow red when in standby and blue when active.
  3. Start playing audio through your system.
  4. Ajustez le Volume knob on the subwoofer to achieve a balanced bass level with your main speakers.
  5. Ajustez le Frequency (Crossover) knob. A good starting point is typically around 80-100 Hz, but this will depend on the low-frequency capabilities of your main speakers. Adjust until the bass blends seamlessly without sounding boomy or disconnected.
  6. Ajustez le Phase switch (0° or 180°). Listen for the setting that provides the most impactful and coherent bass at your listening position.

6.2 Auto Power On/Standby

The Jamo C912 Subwoofer features an auto-on/standby function. When an audio signal is detected, the subwoofer will automatically power on (LED turns blue). If no audio signal is detected for a period, it will enter standby mode (LED turns red) to conserve power. At very low volumes, the subwoofer may not detect an input signal and may remain in standby. Increase the input signal level if this occurs.

7. Entretien

To maintain the appearance and performance of your Jamo C912 Subwoofer:

  • Dust the cabinet regularly with a soft, dry cloth.
  • Avoid using abrasive cleaners, solvents, or strong detergents, as these can damage the finish.
  • Do not expose the subwoofer to excessive moisture or direct sunlight.
  • Assurez une ventilation adéquate autour de l'appareil pour éviter toute surchauffe.

8. Dépannage

ProblèmeCause possibleSolution
Aucun son provenant du caisson de basses
  • Le caisson de basses n'est pas alimenté.
  • Aucun signal audio.
  • Volume trop faible.
  • Connexions incorrectes.
  • Ensure power switch is ON and LED is blue.
  • Check audio cable connections to receiver/amplifier.
  • Augmenter le volume du caisson de basses.
  • Verify receiver/amplifier settings for subwoofer output.
Boomy or muddy bass
  • Fréquence de coupure trop élevée.
  • Réglage de phase incorrect.
  • Poor room placement.
  • Lower the Frequency (Crossover) setting.
  • Toggle the Phase switch (0°/180°) to find the best sound.
  • Expérimentez différents emplacements pour le caisson de basses.
Subwoofer goes into standby too often
  • Input signal too low.
  • Increase the LFE/subwoofer output level from your receiver/amplifier.
  • Increase the subwoofer's volume knob slightly.

9. Spécifications

Nom du modèleC912
Type de haut-parleurCaisson de basses
Diamètre du woofer12 pouces
Puissance de sortie maximale du haut-parleur400 watts
Source d'énergieÉlectrique avec fil
Technologie de connectivitéWired, Wireless (with optional kit)
Utilisations recommandéesMusique, Films
Dimensions du produit (L x l x H)17.9 x 17.9 x 22.1 pouces
Poids de l'article37 livres
CouleurNoir
Code UPC008634004197

10. Garantie et assistance

The Jamo C912 Subwoofer comes with a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official Jamo website or contact Jamo customer support. Keep your proof of purchase for warranty claims.

For technical assistance or further inquiries, please visit the official Jamo support page or contact their customer service department.