Introduction
Thank you for choosing the Vont LED Headlamp, model VNT-SHL02. This headlamp is designed for durability and versatility, making it suitable for various activities such as running, camping, hiking, fishing, and general use. It features ultra-bright VLEDS, 7 distinct light modes, an ergonomic 45° tilt function, and an IPX5 waterproof rating for reliable performance in diverse conditions.
Installation
1. Déballage et inspection initiale
Retirez soigneusement la têteamp from its packaging. Inspect the unit for any visible damage. The package includes two headlamps with pre-installed batteries.
2. Chargement du chargeuramp
The Vont LED Headlamp is rechargeable via USB Type-C. Before first use, fully charge the headlamp to ensure optimal battery life.
- Repérez le port de chargement USB Type-C sur la tête.amp.
- Connectez le câble USB Type-C fourni à la tête.amp et une source d'alimentation USB compatible (par exemple, un adaptateur secteur, un port USB d'ordinateur).
- An indicator light will show the charging status. Once fully charged, the indicator will change (refer to specific light behavior on the device, typically green or off).
Image: The Vont LED Headlamp featuring its USB Type-C charging port and the stretchable, soft strap for comfort.
3. Réglage du bandeau
Le chefamp features an adjustable, stretchable strap for a secure and comfortable fit. Adjust the strap to fit snugly around your head or over a helmet.
Image: A person adjusting the Vont LED Headlamp strap, demonstrating its comfortable and secure fit.
Mode d'emploi
The Vont LED Headlamp offers 7 light modes, easily accessible via a single button.
1. Power On/Off and Main Light Modes
- To turn on the main white light: Appuyez une fois sur le bouton d'alimentation.
- To cycle through main white light modes: With the main light on, press the power button repeatedly to switch between Low, Medium, High, and Strobe modes.
- To turn off the main white light: After cycling through all white light modes, press the button again, or press and hold the button for approximately 3 seconds.
2. Modes de lumière rouge
Le chefamp includes two side red lights for preserving night vision or signaling.
- To turn on the red lights: Press and hold the power button for approximately 3 seconds from an off state or while the white light is on.
- To cycle through red light modes: With the red light on, press the power button repeatedly to switch between Low, SOS, and Strobe modes.
- To turn off the red lights: After cycling through all red light modes, press the button again, or press and hold the button for approximately 3 seconds.
Image: Detailed diagram illustrating the single-button control for activating and cycling through the 7 unique light modes, including main white light and side red lights.
Image: A visual guide to the 7 distinct light modes available on the Vont LED Headlamp, montrerasing the different brightness levels and flashing patterns for both white and red lights.
3. Réglage de l'inclinaison
Le chefamp unit can be tilted up to 45 degrees to direct the light beam precisely where needed, reducing neck strain.
- Gently hold the headlamp body and tilt it to the desired angle.
- Le mécanisme est conçu pour maintenir fermement l'angle choisi.
Entretien
1. Nettoyage
Pour nettoyer la têteampessuyez-le avec un chiffon doux et sec.amp Chiffon. N’utilisez pas de nettoyants abrasifs ni de solvants, car ils pourraient endommager l’appareil.
2. Entretien de la batterie
- Rechargez la têteamp regularly, especially after prolonged use or if the light appears dim.
- For long-term storage, charge the battery to approximately 50% and store the headlamp in a cool, dry place. Recharge every 3-6 months to maintain battery health.
3. Imperméabilisation
The Vont LED Headlamp is IPX5 waterproof, meaning it can withstand splashes and light rain. It is not designed for submersion in water.
Image: The Vont LED Headlamp shown with water splashing, highlighting its IPX5 waterproof capability to withstand splashes and downpours.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Têteamp ne s'allume pas. | La batterie est épuisée. | Chargez la têteamp using the USB Type-C cable. |
| La lumière est faible ou vacille. | Batterie faible. | Rechargez la têteamp. |
| Impossible de changer les modes d'éclairage. | Séquence de pression des boutons incorrecte. | Refer to the "Operating Instructions" section for correct button usage. Ensure a single, quick press for mode changes and a long press for red light activation/deactivation. |
| Têteamp pas de charge. | Câble ou source d'alimentation défectueux ; port de charge obstrué. | Try a different USB Type-C cable or power adapter. Ensure the charging port is clean and free of debris. |
If troubleshooting steps do not resolve the issue, please contact Vont customer support for assistance.
Caractéristiques
- Modèle: VNT-SHL02
- Fabricant: Vont
- Dimensions: 5.72 x 3.48 x 4.27 cm
- Poids: 65.2 g
- Luminosité blanche : 180 lumens
- Type de source lumineuse : DIRIGÉ
- Source d'alimentation : Batterie rechargeable (USB Type-C)
- Indice d'étanchéité : IPX5
- Matériel: ABS
- Couleur: Noir
- Caractéristiques spéciales : Adjustable Light Modes, Adjustable Strap, Lightweight, Weatherproof, 45° Tilt
Garantie et assistance
The Vont LED Headlamp est livré avec un Garantie à vie covering defects. Vont is committed to providing reliable products and offers 24/7 customer support.
For warranty claims, technical assistance, or any inquiries, please visit the official Vont website or contact their customer support team directly. Please retain your proof of purchase for warranty services.
Note: Warranty terms and conditions may apply. Refer to the official Vont website pour obtenir les informations les plus récentes sur la garantie.
