Introduction
The Peak Kyan Pen Rotary Tattoo Machine is engineered for precision and control, offering an ergonomic design that mimics the feel of a traditional pen. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your Peak Kyan Pen.
This machine is equipped with a powerful spring system Faulhaber Motor, designed for reliable performance in professional tattooing environments. It operates within a working voltage range of 6-10V and features a 4mm stroke length, making it compatible with a wide array of cartridge needles.
Contenu du colis
Upon unboxing your Peak Kyan Pen Rotary Tattoo Machine, please verify that all the following components are included:
- Peak Kyan Pen Rotary Tattoo Machine (Blue)
- 3 joints toriques
- 1 x cordon d'alimentation CC
Image: The Peak Kyan Pen Rotary Tattoo Machine shown alongside its retail packaging.
Installation
Follow these steps to prepare your Peak Kyan Pen for operation:
- Déballez la machine : Carefully remove the Peak Kyan Pen and all accessories from its packaging.
- Connecter l'alimentation : Insert the DC power cord into the designated port at the base of the tattoo machine. Connect the other end of the DC power cord to a compatible power supply (not included).
- Fixez l'aiguille de la cartouche : Select your desired cartridge needle. Insert the needle into the machine's front opening, twisting gently until it locks securely into place. Ensure the needle is properly seated to prevent movement during operation.
- Régler la profondeur de l'aiguille : Rotate the grip of the machine to adjust the needle depth according to your tattooing requirements.
Image: The Peak Kyan Pen Rotary Tattoo Machine with its DC power cord attached, ready for connection to a power supply.
Mode d'emploi
The Peak Kyan Pen is designed for intuitive use. Adhere to standard tattooing safety and hygiene protocols.
- Mise sous tension : Once connected to a power supply, activate the power supply to begin operation.
- Voltage Ajustement : Régler le volumetage on your power supply within the recommended range of 6-10V to achieve the desired speed and power for your tattooing technique. Lower voltages result in slower speeds, while higher voltages increase speed.
- Compatibilité des aiguilles : This machine is compatible with a wide variety of standard cartridge needles. Always ensure the cartridge needle is securely attached before operation.
- Longueur de course : The machine features a fixed 4mm stroke length, suitable for various tattooing styles including lining, shading, and color packing.
Entretien
Proper maintenance is crucial for the longevity and optimal performance of your Peak Kyan Pen. Always ensure the machine is disconnected from power before performing any maintenance.
Image: A visual guide illustrating key maintenance points for the Peak Kyan Pen, including lubrication of needle plungers.
- Lubrification: Every other time you switch needles, apply a small amount of lubricant to the needle plungers. This practice helps maintain the machine's smooth operation and extends its lifespan.
- Nettoyage: The Peak Kyan Pen can be effectively wipe-cleaned using disinfectant wipes, such as Madacide. Ensure thorough cleaning after each use to maintain hygiene standards.
- Autoclave Safety: The Kyan Pen grip is designed to be autoclave-safe. However, it is critical to note that the machine body and motor are NOT autoclave-safe. Do not autoclave these components.
- Screw Lubrication: Before re-screwing the grip onto the machine body, it is recommended to lubricate the screws with Vaseline or synthetic grease/oil. This facilitates easier assembly and disassembly and prevents wear.
Dépannage
If you encounter issues with your Peak Kyan Pen, consider the following common troubleshooting steps:
- La machine ne démarre pas :
- Ensure the DC power cord is securely connected to both the machine and the power supply.
- Verify that your power supply is turned on and functioning correctly.
- Vérifiez le fonctionnement de la prise de courant.
- Inconsistent Operation/Weak Power:
- Confirmer le voltage setting on your power supply is within the recommended 6-10V range.
- Inspect the DC power cord for any damage or loose connections.
- Ensure the cartridge needle is not jammed or improperly seated.
- Check if the needle plungers require lubrication as per maintenance instructions.
- Vibrations ou bruit excessifs :
- Verify that the cartridge needle is correctly and securely inserted.
- Ensure all components, especially the grip, are tightened properly.
- Lubricate the needle plungers if they feel dry or stiff.
Si ces étapes ne résolvent pas le problème, veuillez consulter la section Assistance pour obtenir de l'aide supplémentaire.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Modèle | Kyan Pen |
| Couleur | Bleu |
| Longueur de course | 4 mm |
| Vol de travailtage | 6-10V |
| Type de moteur | Faulhaber Motor, spring system |
| Compatibilité des aiguilles | Compatible with a variety of cartridge needles |
| Accessoires inclus | 3 O-rings, 1 DC power cord |
| Pays d'origine | Chine |
Garantie et assistance
For information regarding warranty coverage, returns, or technical support for your Peak Kyan Pen Rotary Tattoo Machine, please contact Peak customer service directly. You can typically find contact details on the manufacturer's official websur le site ou auprès du détaillant où le produit a été acheté.
Il est recommandé de conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
