Manuel d'utilisation des guirlandes lumineuses Suddus

Introduction

Thank you for choosing suddus Curtain Lights. This manual provides essential information for the safe and effective use of your new LED curtain lights. Designed for both indoor and outdoor decoration, these lights feature multiple lighting modes, remote control, and a convenient timer function. Please read this manual thoroughly before installation and operation.

Consignes de sécurité

• Ensure the USB power source is compatible with the light's voltage (5 V).
• The USB plug is not waterproof. Protect it from water exposure, especially during outdoor use.
• Do not attempt to modify or repair the lights. Contact customer support for assistance.
• Tenir à l’écart des matières inflammables.
• Débranchez les lampes de la source d'alimentation lorsqu'elles ne sont pas utilisées ou avant de les nettoyer.
• The LED bulbs remain cool to the touch, ensuring safety.

Contenu du colis

Veuillez vérifier le colis pour vous assurer que tous les articles sont présents :

• 1 x suddus USB-200 LED Curtain Lights (6.5 ft x 6.5 ft with 10 strings, 20 LEDs per string)
• 1 x télécommande
• 1 x USB Plug with Control Button
• 1 x 9.8 ft Extension Cord
• 1 pile CR2 (préinstallée dans la télécommande)

Installation

Suivez ces étapes pour une installation facile :

1. Déballez soigneusement : Gently remove the lights from the packaging. The strings are bundled to prevent tangling.
2. Positionnement : Determine where you want to hang the curtain lights. The main horizontal string should be set up first.
3. Accrochez la corde principale : Secure the main horizontal string in your desired location (e.g., along a curtain rod, wall, or pergola).
4. Unwrap Individual Strings: Once the main string is in place, carefully unwrap each individual vertical string. They will cascade downwards. (Important: Do not unwrap the individual strings before hanging the main string to avoid tangling.)
5. Connecter l'alimentation : Plug the USB connector into a compatible 5V USB power source (e.g., power bank, laptop, USB wall adapter). The lights will turn on automatically.

Image: Setup diagram illustrating the correct method to hang the main string first, then unwrap the individual light strands to prevent tangling.

Image: The suddus Curtain Lights, showing the main string with cascading individual light strands, connected to a USB plug and accompanied by its remote control. The lights are depicted hanging outdoors from a tree branch, illuminating the surroundings.

Mode d'emploi

Your suddus Curtain Lights can be controlled via the included remote or the button on the USB plug.

Fonctions de la télécommande

The remote control allows for convenient operation from up to 72 feet away. Ensure the remote is aimed at the USB plug for optimal performance.

Image: Un détail view of the smart remote control for the suddus Curtain Lights, highlighting buttons for different lighting modes (Combination, Sequential, Chasing/Flash, Twinkle/Flash, In Waves, Slo-Glo, Slow Fade, Steady On), brightness adjustment, and timer. Below the remote, illustrations show various compatible USB power sources such as a laptop, power bank, 5V-2A power adapter, and a standard USB socket.

• MARCHE/ARRÊT : Appuyez sur le ON bouton pour allumer les lumières, et DÉSACTIVÉ pour les désactiver.
• Lighting Modes (1-8): Select from 8 distinct lighting modes:
  1. Combinaison
  2. Dans les vagues
  3. Séquentiel
  4. Slo-Glo
  5. Chasing/Flash
  6. Fondu lent
  7. Scintillement/Flash
  8. Reste sur la bonne voie
• Réglage de la luminosité : Utilisez le Luminosité+ et Dim buttons to adjust the light intensity (25%, 50%, 75%, 100%).
• Fonction minuterie : Appuyez sur le MINUTEUR button. The lights will flash twice to indicate the timer is activated. The lights will stay on for 6 hours and then turn off for 18 hours, repeating the cycle every 24 hours. To deactivate the timer, press the MINUTEUR button again; the lights will flash once.
• Fonction mémoire : The remote automatically saves the last selected mode and brightness setting.

USB Plug Button Control

A button on the USB plug allows you to cycle through the 8 lighting modes directly, without the remote control.

Entretien

• Nettoyage: Ensure the lights are unplugged before cleaning. Gently wipe the wires and LEDs with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Stockage: When not in use, carefully coil the strings to prevent tangling. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Remplacement de la pile (télécommande) : If the remote control's range or responsiveness decreases, replace the CR2 battery.

Dépannage

Caractéristiques

• Modèle: USB-200 LED
• Source de lumière : DIRIGÉ
• Quantité de LED : 200 LEDs (10 strings, 20 LEDs per string)
• Couleur de la lumière : Blanc chaud
• Curtain Size: 6.5 ft (Width) x 6.5 ft (Height)
• Longueur de la rallonge : 9.8 pieds
• Source d'alimentation : USB (électrique filaire)
• Voltage: 5V
• Quoitage: 3 watts
• Méthode de contrôle : Télécommande, bouton USB
• Caractéristiques spéciales : 8 Lighting Modes, Dimmable, Timer, Memory Function
• Résistance à l'eau : IP44 (LEDs and wires are waterproof; USB plug is NOT waterproof)
• Batterie à distance: 1 x CR2 (inclus)
• Matériel: Plastique

Garantie et assistance

suddus provides a 30-day exchange service and 12-month quality maintenance for this product. If you encounter any issues or have questions, please contact suddus customer service. We are available 24/7 to assist you.

For support, please refer to the contact information provided with your purchase or visit the official suddus store on Amazon: suddus Amazon Store.