Lepro 20W LED Floodlight (2-Pack) Instruction Manual

1. Introduction

Thank you for choosing the Lepro 20W LED Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your new floodlights. Please read these instructions carefully before use and retain them for future reference.

Image 1.1: Two Lepro 20W LED Floodlights with power cable. These floodlights are designed for outdoor use, providing bright and efficient illumination.

2. Consignes de sécurité

Pour garantir un fonctionnement sûr, veuillez toujours suivre ces consignes :

• Sécurité électrique : Ensure the power supply is disconnected before installation or maintenance. All electrical connections must comply with local wiring regulations. If unsure, consult a qualified electrician.
• Mise à la terre : Le projecteur doit être correctement mis à la terre pour éviter tout risque d'électrocution.
• Voltage: Vérifiez que le volume d'alimentationtage correspond au volume nominal du projecteurtage (240 Volts CA).
• Résistance à l'eau : The product is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, do not submerge the unit in water.
• Chaleur: The floodlight generates heat during operation. Do not cover the unit or install it in an enclosed space without adequate ventilation.
• Montage: Assurez-vous que la surface de montage est suffisamment solide pour supporter le poids du projecteur.
• Source de lumière : Ne fixez pas directement la source lumineuse LED lorsqu'elle est allumée, car cela pourrait provoquer une fatigue oculaire ou des lésions oculaires.

3. Contenu du colis

Votre colis doit contenir les éléments suivants :

• 2 x Lepro 20W LED Floodlights
• Manuel d'instructions (ce document)

4. caractéristiques du produit

The Lepro 20W LED Floodlight offers the following key features:

• Ultra-Bright and Energy-Efficient: Utilizes SMD 2835 LEDs and an optimized reflector design to deliver 1700 lumens of daylight white light (5000K) with only 20W of power consumption, equivalent to a 140W halogen lamp.
• Durable et résistant aux intempéries : Constructed from die-cast aluminum and tempered glass, with an IP65 rating for resistance against dust and water, suitable for all weather conditions.
• Dissipation thermique efficace : Features an ultra-thin housing and integrated heat sink design for effective heat management, extending the product's lifespan.
• Grand angle de faisceau : Provides a 110° beam angle for broad illumination coverage.
• 360° Rotatable Bracket: The mounting bracket allows for 360° rotation, enabling flexible adjustment of the light direction.
• Installation facile : Designed for straightforward installation on various surfaces.

Image 4.1: Key lighting specifications of the floodlight, including LED quantity, color temperature, brightness, and beam angle.

Image 4.2: Illustration of the floodlight's coverage, demonstrating that 20W provides 1700 lumens, effectively illuminating a 5-meter diameter area when mounted at 4 meters height.

Image 4.3: The rear of the floodlight, illustrating the heat dissipation fins designed to efficiently release heat and prolong the product's lifespan.

Image 4.4: The 360° rotatable bracket, allowing for flexible adjustment of the light direction to suit various illumination needs.

Image 4.5: Demonstrates the floodlight's durability and weather resistance, highlighting its IP65 waterproof rating, heat resistance, and frost resistance for reliable performance in diverse outdoor conditions.

5. Spécifications

Image 5.1: Detailed dimensions of the floodlight, including length, width, and height, along with cable length, provided in both millimeters and inches for precise planning.

6. Installation

Suivez ces étapes pour une installation correcte :

1. Préparation: Before starting, ensure the power supply is turned off at the main circuit breaker.
2. Emplacement de montage : Choose a suitable location for the floodlight. The included bracket allows for mounting on walls, ceilings, or directly on the ground.
3. Marquage: Use the bracket as a template to mark the drilling points on the desired surface.
4. Forage: Drill holes at the marked points. Insert appropriate wall plugs if mounting on masonry.
5. Support sécurisé : Attach the bracket securely to the surface using screws (not included). The bracket features 2 self-locking screws for easy removal of the spot without tools.
6. Ajuster l'angle : The bracket is 360° rotatable. Adjust the floodlight to the desired angle before tightening the bracket screws.
7. Câblage : Connect the floodlight's 1-meter power cable to your electrical supply. Ensure correct wiring: brown wire for Live, blue wire for Neutral, and green/yellow wire for Ground. Use a waterproof junction box for outdoor connections (not included).
8. Vérification finale : Double-check all connections and ensure the floodlight is securely mounted.
9. Mise sous tension : Rétablissez le courant au niveau du disjoncteur principal.

Image 6.1: Various installation methods for the floodlight, demonstrating its versatility for mounting on walls, ground, or ceilings.

7. Fonctionnement

Once installed and connected to a power source, the Lepro 20W LED Floodlight will illuminate when power is supplied. There are no additional controls on the unit itself. Operation is typically controlled via an external switch or timer connected to the power circuit.

Image 7.1 : Examples of the floodlight in various applications, including residential and commercial outdoor spaces, showcasing its effective illumination.

8. Entretien

The Lepro LED Floodlight requires minimal maintenance:

• Nettoyage: Periodically clean the glass surface with a soft, damp Utilisez un chiffon pour assurer un éclairage optimal. N’utilisez pas de nettoyants abrasifs ni de solvants.
• Inspection: Regularly inspect the power cable and housing for any signs of damage. If damage is found, disconnect power immediately and have the unit inspected by a qualified professional.
• Aucune pièce réparable par l'utilisateur : The LED light source is integrated and not replaceable by the user. Do not attempt to open the housing.

9. Dépannage

Si vous rencontrez des problèmes avec votre projecteur, consultez les problèmes courants et leurs solutions ci-dessous :

If the problem persists after attempting these solutions, please contact Lepro customer support.

10. Garantie et assistance

Lepro products are designed for reliability and performance. For warranty information or technical support, please refer to the official Lepro webConsultez le site ou contactez directement leur service client. Conservez votre reçu d'achat comme preuve d'achat.

Pour plus d'informations, visitez le Magasin de lépreux.