Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your JAM Audio HX-P525-BL Retro Classic Vintage Bluetooth Speaker. Please read this manual thoroughly before using your device to ensure optimal performance and longevity.
The JAM Audio HX-P525-BL is a portable Bluetooth speaker designed with a vintage aesthetic, offering up to 16 hours of playtime, an Aux-in port, and USB charging capabilities. It also features a speakerphone function for hands-free calls.
Qu'y a-t-il dans la boîte
- JAM Audio HX-P525-BL Rétro Classique Vintage Haut-parleur Bluetooth
- Câble de chargement USB
- Câble auxiliaire de 3.5 mm
- Manuel d'instructions
Image: The JAM Audio Retro Classic Vintage Bluetooth Speaker in blue, showcasing its front design with the volume dial and speaker grille.
Installation
1. Chargement du haut-parleur
Before first use, fully charge your speaker. Connect the provided USB cable to the speaker's USB port (located under the rubber flap on the side) and the other end to a USB power adapter (not included) or a computer's USB port. The charging time is approximately 3 hours.
Image: The JAM Audio speaker with text indicating "Up to 16 hours of playtime", highlighting its long battery life.
2. Mise sous/hors tension
To power on the speaker, press and hold the button located in the center of the volume dial on the front for approximately 4 seconds. The dial will light up in neon blue, and an audible sound will confirm it is powered on. To power off, press and hold the same button again.
3. Couplage Bluetooth
- Ensure the speaker is powered on and in pairing mode (indicated by a flashing blue light).
- Activez le Bluetooth sur votre smartphone, tablette ou ordinateur portable.
- Rechercher "JAM Vintage" in your device's Bluetooth settings.
- Select "JAM Vintage" to connect. An audible confirmation will sound once paired.
Video: An unboxing and demo of the RetroJam Bluetooth Speaker, showing the speaker's features and basic operation. This video is provided by a seller.
Mode d'emploi
Lecture de musique
- Lecture/Pause : Press the center button on the top panel.
- Piste suivante : Press the right arrow button on the top panel.
- Piste précédente: Press the left arrow button on the top panel.
- Contrôle du volume : Rotate the large dial on the front of the speaker.
Fonction de haut-parleur
When connected via Bluetooth, the speaker can be used as a speakerphone. Music will pause for incoming calls and resume after the call ends. To make a call, simply dial from your connected phone, and the speaker will automatically connect hands-free.
Connexion Aux-in
For non-Bluetooth devices or when the battery is low, use the provided 3.5mm Aux cable. Connect one end to the speaker's Aux port (under the rubber flap) and the other end to your audio device's headphone jack.
Stereo Pairing (Pair 2 Speakers)
Two JAM Audio Vintage speakers can be paired together for an enhanced stereo sound experience. Refer to the specific instructions for stereo pairing in the full manual (if available) or on the manufacturer's website.
Image: Two JAM Audio Vintage speakers, one blue and one mint green, placed on a shelf, illustrating the stereo pairing capability.
Entretien
- Gardez le haut-parleur au sec. Ne l'exposez pas à l'eau ni à une humidité excessive.
- Clean the speaker with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Rangez l'enceinte dans un endroit frais et sec lorsqu'elle n'est pas utilisée.
- Évitez les températures extrêmes.
Dépannage
| Problème | Solution |
|---|---|
| Le haut-parleur ne s'allume pas. | Ensure the speaker is fully charged. Press and hold the power button for 4 seconds. |
| Impossible de coupler via Bluetooth. | Make sure Bluetooth is enabled on your device and the speaker is in pairing mode. Ensure "JAM Vintage" is selected. Try restarting both devices. |
| Aucun son provenant du haut-parleur. | Check volume levels on both the speaker and your connected device. Ensure the speaker is correctly paired or the Aux cable is securely connected. |
Caractéristiques
- Nom du modèle : HX-P525-BL
- Type de haut-parleur : Haut-parleur Bluetooth
- Dossier spécial : Chargement USB
- Technologie de connectivité: Auxiliaire, Bluetooth, USB
- Technologie de communication sans fil : Bluetooth (Portée : 10 mètres)
- Source d'alimentation : Alimenté par batterie (1 batterie lithium-ion incluse)
- Récréation: Jusqu'à 16 XNUMX heures
- Temps de charge : 3 heures
- Mode de sortie audio : Stéréo
- Puissance de sortie maximale du haut-parleur : 5 watts
- Méthode de contrôle : Touche
- Dimensions du produit : 8.63 x 2.63 x 5.13 pouces
- Poids de l'article : 2.25 livres
- Couleur: Bleu
- Fabricant: HoMedics
- Code à barres : 031262097590
Garantie
Ce produit est livré avec un Garantie limitée. For specific terms and conditions, please refer to the warranty information included in your product packaging or visit the official Jam Audio website.
Soutien
Pour obtenir de l'aide supplémentaire, l'enregistrement du produit ou pour view additional support resources, please visit the official Jam Audio website:
You can also contact customer support through the information provided on the product packaging.
