Linkind Dimmable A19

Linkind A19 Dimmable LED Light Bulbs Instruction Manual

1. Introduction

Thank you for choosing Linkind A19 Dimmable LED Light Bulbs. These bulbs are designed to provide efficient, high-quality lighting with dimming capabilities, suitable for various indoor applications. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs.

Six Linkind A19 LED light bulbs in a pack

Image 1.1: Linkind A19 Dimmable LED Light Bulbs (6-pack).

2. caractéristiques du produit

Infographic showing Linkind A19 LED bulb features: Instant on, 5000K color temp, 15,000hr lifespan, CRI80+, 230 degree beam angle, Dimmable 10-100%, 480lm brightness, 5W equivalent to 40W, and dimensions.

Image 2.1: Key features and dimensions of the Linkind A19 LED bulb.

Comparison of Linkind 5W A19 LED bulb vs. Other 60W Incandescent bulb, showing energy consumption, heat emitted, and lifespan differences.

Image 2.2: Energy saving comparison between Linkind LED and incandescent bulbs.

Two images side-by-side. Left: A woman reading with a Linkind bulb, labeled 'No Flickering/Buzzing'. Right: A woman holding her head, looking at a flickering screen, labeled 'Frequent Flickering/Buzzing'.

Image 2.3: Illustration of flicker-free and buzz-free operation for eye comfort.

3. Consignes de sécurité

Please read and understand all safety instructions before installing or using these LED bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.

4. Installation

Installing your Linkind A19 LED bulbs is a simple process. Follow these steps:

  1. Couper l'alimentation : Before replacing any bulb, ensure the power to the light fixture is turned off at the switch and, if necessary, at the circuit breaker.
  2. Retirer l'ancienne ampoule : Dévissez soigneusement l'ampoule en place. Laissez-la refroidir si elle a été utilisée récemment.
  3. Installer une nouvelle ampoule : Screw the Linkind A19 LED bulb into the E26 medium screw base socket until it is finger-tight. Do not overtighten.
  4. Restaurer l'alimentation : Turn the power back on at the switch and circuit breaker.
  5. Test: Turn on the light to ensure the bulb is functioning correctly.

Important Note on Dimmers: These bulbs are dimmable. For optimal performance and to avoid flickering or damage, use with LED-compatible dimmer switches. Not compatible with 3-way touch lamps.

Image showing a hand adjusting a dimmer switch, with a graphic indicating dimming from 10% to 100%. Below, a green checkmark next to 'Wall Dimmer' and a red X next to '3-Way Touch Lamp'.

Image 4.1: Dimmable functionality and compatibility with wall dimmers (not 3-way touch lamp(s).

5. Fonctionnement

Once installed, your Linkind A19 LED bulbs are ready for use. They offer instant illumination and smooth dimming capabilities.

A person working at a desk with a Linkind A19 LED bulb in a desk lamp, and a graphic showing smooth dimming from 10% to 100%.

Image 5.1: Smooth dimming operation of the Linkind A19 LED bulb.

6. Entretien

Linkind A19 LED bulbs require minimal maintenance due to their long lifespan and durable design.

7. Dépannage

If you encounter issues with your Linkind A19 LED bulbs, refer to the following common problems and solutions:

ProblèmeCause possibleSolution
L'ampoule ne s'allume pas.Le luminaire n'est pas alimenté ; l'ampoule n'est pas correctement vissée ; l'ampoule est en fin de vie.Vérifiez l'alimentation et l'interrupteur ; assurez-vous que l'ampoule est bien vissée ; remplacez l'ampoule si nécessaire.
L'ampoule clignote ou bourdonne.Interrupteur variateur incompatible ; connexion desserrée.Assurez-vous que le variateur est compatible avec les LED ; vérifiez la connexion de l’ampoule.
L'ampoule ne s'atténue pas correctement.Incompatible dimmer switch; Dimmer range not set correctly.Use an LED-compatible dimmer; Some dimmers have adjustment settings for minimum brightness.

8. Spécifications

SpécificationDétail
MarqueLien
Numéro de modèleDimmable A19
Type de lumièreDIRIGÉ
Forme de l'ampoule TailleA19
Culot de l'ampouleE26
Quoitage (réel)5 watts
Équivalent à incandescence40 watts
Luminosité480 lumens
Température de couleur5000 Kelvin (lumière du jour)
Indice de rendu des couleurs (IRC)80+
Angle du faisceau230 degrés
Voltage120 volts
Durée de vie moyenne15,000 heures
GradableOui (10 % - 100 %)
CertificationsHomologué UL, certifié FCC
Utilisation intérieure/extérieureIntérieur
MatérielPlastique
Dimensions du produit2.17 po L x 4.13 po H

9. Garantie et assistance

Linkind is committed to providing high-quality products and customer satisfaction.

Coordonnées:
Téléphone : 1-877-770-5727
Heures d'ouverture : du lundi au vendredi, de 9 h à 5 h (heure du Pacifique)

Documents connexes - Dimmable A19

Préview Ampoule intelligente Linkind A19 CCT Matter : manuel d'utilisation et guide d'installation
Manuel d'utilisation complet et guide d'installation de l'ampoule connectée Linkind A19 CCT Matter. Découvrez comment l'installer, la connecter au Wi-Fi et l'intégrer à des systèmes domotiques comme Alexa, Google Home et Apple Home.
Préview Ampoule connectée Linkind Matter : Guide d’installation, de fonctionnalités et de dépannage
Guide complet des ampoules connectées Linkind Matter : installation, fonctionnalités, compatibilité avec Apple Home, Alexa, Google Home et SmartThings, dépannage des problèmes courants et spécifications techniques. Inclut les numéros de modèle et les informations d’assistance.
Préview Linkind BR30 Smart LED Bulb - Matter, RGBTW Color Changing, App & Voice Control Manual
Comprehensive operation manual for Linkind BR30 Smart LED Bulbs. Learn how to install, connect, and control your RGBTW color-changing bulbs with Matter, Alexa, Google Home, and the Linkind app.
Préview Manuel d'utilisation de l'ampoule connectée Linkind Matter RGBTW - Installation, configuration et dépannage
Manuel d'utilisation complet de l'ampoule connectée Linkind Matter RGBTW. Découvrez comment l'installer, la connecter à Alexa, Google Home, Apple Home et SmartThings, résoudre les problèmes courants et consulter la FAQ.
Préview Guide d'utilisation des appareils intelligents Linkind Matter : Configuration, Alexa, Google Home, Apple Home, Intégration SmartThings
Guide d'utilisation complet pour les appareils connectés Linkind Matter Wi-Fi, notamment les ampoules, les prises et les interrupteurs. Apprenez à configurer pas à pas votre appareil avec Alexa, Google Home, Apple Home, SmartThings et AiDot. Ce guide inclut des informations sur la compatibilité, les fonctionnalités et le dépannage.
Préview Guide d'utilisation des ampoules connectées Linkind Matter Wi-Fi
Guide d'utilisation complet pour les ampoules connectées Linkind Matter Wi-Fi, couvrant l'installation, la compatibilité avec Alexa, Google Home, Apple Home et SmartThings, les fonctionnalités et le dépannage.