Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Verona Designer Series VDFSIE365SS 36-inch Freestanding Induction Range Oven. Please read all instructions carefully before using the appliance to ensure safe and efficient operation. Retain this manual for future reference.

Image : Avant view of the Verona Designer Series VDFSIE365SS 36-inch Freestanding Induction Range Oven.
Consignes de sécurité
Always follow basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury. This appliance is for residential use only. Ensure proper grounding and electrical connection by a qualified technician. Do not store flammable materials in or near the oven. Keep children away from the appliance during operation.
Configuration et installation
Déballage et placement
Carefully remove all packaging materials. This is a freestanding unit and should be placed on a level surface. Ensure adequate clearance from adjacent cabinets and walls as specified in the installation guide (not included in this manual).
Exigences électriques
The appliance requires a 120/240 Volt, 50 Amp electrical supply. A power cord is not included and must be purchased separately and installed by a qualified electrician.
Dimensions
- Largeur: 35-7/8 pouces
- Height (without backguard): Réglable de 35-7/16 pouces à 37-1/4 pouces
- Profondeur: 24 inches (Overall depth 25-1/4 inches)
- Capacité du four : 5.0 pieds cubes
- Inside Oven Dimensions: 30 pouces (L) x 16 pouces (P) x 15.5 pouces (H)

Image : inclinée view of the Verona Designer Series VDFSIE365SS, showing its freestanding design.
Mode d'emploi
Fonctionnement de la table de cuisson
The induction cooktop features 5 elements on a black ceramic glass surface. Control knobs are located on the front panel for each element. The cooktop includes two bridge zones and one dual zone for versatile cooking.
- Puissance de l'élément : Two elements at 2,100/3,700W Boost, two elements at 2,100/3,700W Boost, and one center dual zone at 1,850/3,000W Boost – 2,600/5,500W Boost.
- Contrôles : Turn the corresponding knob to activate and adjust the heat level for each element.

Image : Vue de dessus view of the induction cooktop and front control panel.

Image: Diagram illustrating the layout and power of the 5 induction elements, including bridge and dual zones.
Fonctionnement du four
The oven features true European convection with dual convection fans for uniform heat distribution. It includes two interior halogen lights for visibility and two oven racks, one of which is an EZ Glide rolling rack.
- Préchauffage : Select the desired cooking function and temperature using the oven control knobs. The oven will begin preheating.
- Fonctions de cuisson : Refer to the markings on the control panel for available cooking modes (e.g., Bake, Broil, Convection Bake).
- Digital Clock and Timer: Use the digital clock and timer to monitor cooking duration.

Image : Intérieur view of the oven cavity, showing the dual convection fans and two oven racks.

Image: Close-up of an oven control knob, showing temperature and function settings.
Tiroir de rangement
A pull-out storage drawer is located beneath the oven, providing convenient space for storing cookware such as pans and pots.

Image: The pull-out storage drawer located at the base of the range.
Entretien et maintenance
Nettoyage de la table de cuisson
The black ceramic glass cooktop is designed for easy cleaning. Allow the surface to cool completely before cleaning. Use a ceramic cooktop cleaner and a non-abrasive pad to remove spills and stains. Wipe with a clean, damp chiffon et séchez soigneusement.
Nettoyage du four
The oven features an EZ Clean Porcelain Oven Surface. For light spills, wipe with a damp cloth and mild detergent once the oven has cooled. For heavier soil, consult the full product manual for recommended cleaning methods.
Nettoyage extérieur
Clean the stainless steel exterior with a soft cloth and a stainless steel cleaner. Avoid abrasive cleaners or scouring pads that can scratch the surface. The chrome finish knobs can be wiped with a damp tissu.
Dépannage
If you experience issues with your range oven, refer to the following common troubleshooting tips:
- L'appareil ne s'allume pas : Check if the power cord is properly connected and if the circuit breaker has tripped.
- Induction elements not heating: Ensure you are using induction-compatible cookware. The cookware must have a magnetic base.
- Le four ne chauffe pas : Verify that the oven function and temperature are correctly set. Allow sufficient time for preheating.
- Cuisson inégale : Ensure oven racks are positioned correctly and that cookware does not obstruct airflow, especially with convection functions.
For more detailed troubleshooting or persistent issues, contact customer support.
Spécifications du produit
| Fonctionnalité | Spécification |
|---|---|
| Nom du modèle | VDFSIE365SS |
| Marque | Vérone |
| Facteur de forme | Freestanding |
| Matériel | Acier inoxydable |
| Type de finition | Chrome Finish (Knobs) |
| Type de contrôles | Bouton |
| Nombre d'éléments chauffants | 5 (2 Bridge, 1 Dual Zone) |
| Puissance de la table de cuisson | 2x 2,100/3,700W Boost, 2x 2,100/3,700W Boost, 1x 1,850/3,000W Boost – 2,600/5,500W Boost (Center Dual Zone) |
| Capacité du four | 5.0 pieds cubes |
| Caractéristiques du four | True European Convection, Dual Convection Fans, 2 Interior Halogen Lights, EZ Clean Porcelain Surface |
| Étagères | 1 EZ Glide Rolling Rack, 1 Pullout Rack |
| Type de tiroir | Stockage |
| Électrique | 120/240 volts, 50 Amps (Power Cord Not Included) |
| Dimensions de l'article (P x L x H) | 25.25"P x 35.88"L x 37.25"H |
| Poids de l'article | 270 livres |
Informations sur la garantie
This Verona Designer Series VDFSIE365SS Induction Range Oven comes with a Garantie fabricant d'un an. Please retain your proof of purchase for warranty claims. For full terms and conditions, refer to the warranty documentation provided with your appliance or contact Verona customer support.
Assistance clientèle
For technical assistance, service requests, or to order replacement parts, please contact Verona customer support. Contact information can typically be found on the manufacturer's websur le site ou dans la documentation complète du produit.