1. Introduction
The RCF AYRA-FIVE-PRO is a professional 5-inch powered studio monitor designed for accurate audio monitoring in various production environments. This monitor provides a neutral sound reproduction tool, essential for analyzing recordings and optimizing audio mixes. It incorporates a powerful internal DSP for optimized frequency response and dynamics, along with RCF FiRPHASE processing to achieve an outstanding 0° phase response.
This manual provides essential information for the safe and efficient use of your RCF AYRA-FIVE-PRO studio monitor. Please read it thoroughly before setup and operation.
2. Consignes de sécurité
AVERTISSEMENT : RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR.
- N'exposez pas cet appareil à la pluie ou à l'humidité.
- Do not remove the cover. No user-serviceable parts inside. Refer all servicing to qualified service personnel.
- Vérifiez que le cordon d'alimentation n'est pas endommagé et qu'il est correctement mis à la terre.
- Disconnect the power cord before cleaning or moving the unit.
- Évitez de placer le moniteur près de sources de chaleur ou en plein soleil.
- Ne bloquez pas les ouvertures de ventilation.
Respectez tous les avertissements et instructions indiqués sur le produit.
Figure 2.1: Rear panel with safety warnings and connection points.
3. Contenu du colis
Vérifiez que votre colis contient les éléments suivants :
- RCF AYRA-FIVE-PRO Powered 5-inch Studio Monitor
- Câble d'alimentation
- Manuel de l'utilisateur (ce document)
4. Produit terminéview
The RCF AYRA-FIVE-PRO features a robust design with a 5-inch woofer and a 1-inch tweeter, housed in a rectangular enclosure. The front panel includes the speaker drivers and bass reflex ports, while the rear panel provides all controls and input connections.
4.1 Panneau avant
Figure 4.1 : Face avant view of the RCF AYRA-FIVE-PRO.
The front panel displays the 5-inch woofer for low and mid-range frequencies and the 1-inch tweeter for high frequencies. The RCF logo is located at the bottom.
Figure 4.2: Close-up of the speaker drivers.
4.2 Commandes et connexions du panneau arrière
Figure 4.3: Rear panel controls and connections.
- HIGH FREQUENCY TRIM: Adjusts the high-frequency response (-1dB, 0dB, +1dB).
- LOW FREQUENCY TRIM: Adjusts the low-frequency response (-2dB, 0dB, +2dB).
- LE VOLUME: Controls the overall output level of the monitor.
- ENTRÉE ÉQUILIBRÉE : XLR input for balanced audio signals.
- ENTREE DESEQUILIBRE : 1/4-inch TRS input for unbalanced audio signals.
- ENTRÉE CA : Power connection for the included power cable (100-240 V ~ 50-60 Hz).
- INTERRUPTEUR: Turns the monitor ON or OFF.
5. Installation
5.1 Placement
- Place the monitors on a stable, flat surface, ideally on isolation pads to minimize vibrations.
- Position the monitors to form an equilateral triangle with your listening position, with the tweeters at ear level.
- Maintain a consistent distance from walls to avoid unwanted bass buildup or cancellation.
5.2 Connexions
- Assurez-vous que l'interrupteur d'alimentation du moniteur est en position OFF.
- Connect your audio source (e.g., audio interface, mixer) to the monitor using either a balanced XLR cable or an unbalanced 1/4-inch TRS cable. Use balanced connections whenever possible for optimal signal integrity.
- Connect the supplied power cable to the AC INPUT on the rear panel of the monitor and then to a suitable power outlet.
6. Mode d'emploi
6.1 Mise sous/hors tension
- To power on, ensure all connections are secure, then flip the POWER SWITCH to the ON position.
- To power off, flip the POWER SWITCH to the OFF position. It is recommended to power off your audio source first, then the monitors.
6.2 Réglage du volume
Use the VOLUME knob on the rear panel to set the desired listening level. Start with a low volume and gradually increase it to a comfortable level.
6.3 Frequency Trim Controls
The HIGH FREQUENCY TRIM and LOW FREQUENCY TRIM controls allow you to adjust the monitor's response to suit your acoustic environment and personal preference. Experiment with these settings to achieve the most accurate sound for your room.
- HIGH FREQUENCY TRIM: Ajuste la réponse dans les aigus.
- LOW FREQUENCY TRIM: Ajuste la réponse des basses.
6.4 Connectivité Bluetooth
The RCF AYRA-FIVE-PRO supports Bluetooth wireless communication. Refer to your audio source's Bluetooth pairing instructions to connect to the monitor. Once paired, audio can be streamed wirelessly.
7. Entretien
- Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'extérieur du moniteur. N'utilisez pas de nettoyants abrasifs, de cires ni de solvants.
- Stockage: When not in use for extended periods, store the monitor in a dry, dust-free environment.
- Ventilation: Ensure that the ventilation openings on the monitor are not obstructed to prevent overheating.
8. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de son | Power not connected; Volume too low; Input cable disconnected or faulty; Audio source issue. | Check power cable and switch; Increase volume; Verify input cable connections; Check audio source output. |
| Son déformé | Input signal too high; Volume too high; Faulty cable. | Reduce input signal level from source; Lower monitor volume; Try a different cable. |
| bourdonnement/vrombissement | Ground loop; Unbalanced cable used for long runs; Interference. | Ensure all equipment is on the same electrical circuit; Use balanced cables; Try a ground loop isolator. |
| Bluetooth ne se connecte pas | Monitor not in pairing mode; Device too far; Interference. | Ensure monitor is discoverable; Move device closer; Reduce other wireless activity. |
If the problem persists after attempting these solutions, please contact RCF customer support.
9. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Nom du modèle | AYRA-FIVE-PRO |
| Type de haut-parleur | Moniteur de studio alimenté |
| Diamètre du woofer | 5 pouces |
| Diamètre du tweeter | 1 pouces |
| Puissance de sortie maximale du haut-parleur | 200 watts |
| Technologie de connectivité | XLR, 1/4-inch TRS, Bluetooth |
| Technologie de communication sans fil | Bluetooth |
| Source d'énergie | Corded Electric (100-240 V ~ 50-60 Hz) |
| Dimensions du produit (P x L x H) | 9.57" x 11.81" x 7.28" (24.3 cm x 30 cm x 18.5 cm) |
| Poids de l'article | 2.2 livres (1 kg) |
| Matériel | Stainless Steel (Cabinet) |
| Couleur | Black - RAL 9005 |
| Méthode de contrôle | Touch (for some functions, likely referring to digital controls) |
| Type de montage | Support de table |
Figure 9.1: RCF AYRA-FIVE-PRO dimensions.
10. Garantie et assistance
The RCF AYRA-FIVE-PRO studio monitor comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms and conditions.
For technical support, service, or warranty inquiries, please contact RCF customer service through their official weble site ou les coordonnées fournies avec votre documentation d'achat.
