1. Introduction
This manual provides essential instructions for the safe and effective use of your Microlife WS 200 Electronic Personal Scale. This device is designed to measure body weight and analyze body composition, including body fat and water percentage, and can connect to the Microlife Connected Health+ application via Bluetooth Smart for comprehensive health tracking.
Veuillez lire attentivement ce manuel avant la première utilisation et conservez-le pour toute consultation ultérieure.
2. Installation
2.1 Déballage et inspection initiale
Carefully remove the scale from its packaging. Inspect the device for any signs of damage. If any damage is observed, do not use the scale and contact your retailer.

Image 1: Microlife WS 200 BT Diagnostic Scale packaging. The box displays the scale, its model number, Bluetooth Smart logo, and features like body composition diagnosis and compatibility with the Microlife Connected Health+ App.
2.2 Installation de la batterie
The Microlife WS 200 scale requires 4 AAA batteries, which are included. Locate the battery compartment on the underside of the scale. Open the compartment cover, insert the batteries according to the polarity indicators (+/-), and close the cover securely.
Note: Veillez à insérer correctement les piles afin d'éviter d'endommager l'appareil.
2.3 Placement de l'échelle
Place the scale on a hard, flat, and stable surface. Uneven or soft surfaces (like carpet) can affect measurement accuracy. Avoid placing the scale near strong electromagnetic fields or in areas with extreme temperature fluctuations.

Image 2: The Microlife WS 200 Electronic Personal Scale with a digital display showing a weight reading of "58.8 kg". The scale features a transparent glass surface with integrated electrodes for body composition analysis.
2.4 Connecting to Microlife Connected Health+ App
The scale is designed for automatic data transfer via Bluetooth technology to the Microlife Connected Health+ application. Follow these steps:
- Download the "Microlife Connected Health+" app from the App Store (for iOS devices) or Google Play (for Android devices).
- Assurez-vous que le Bluetooth est activé sur votre smartphone ou votre tablette.
- Open the Microlife Connected Health+ app and follow the on-screen instructions to pair your WS 200 scale.
- Step onto the scale to initiate a measurement and data transfer.

Image 3: A smartphone screen displaying the Microlife Connected Health+ application interface, with prominent buttons for downloading the app from the Apple App Store and Google Play Store, and a Bluetooth logo indicating connectivity.
3. Mode d'emploi
3.1 Mesure du poids
- Placez la balance sur une surface plane et stable.
- Step onto the scale barefoot and stand still. Ensure your feet are positioned correctly on the electrodes for body composition analysis.
- The display will show your weight. Wait for the reading to stabilize.
- Step off the scale. The measurement will automatically be saved and, if connected, transferred to the Microlife Connected Health+ app.
For consistent results, take measurements at the same time of day, preferably in the morning before breakfast and after using the restroom.
3.2 Analyse de la composition corporelle
The Microlife WS 200 provides body composition diagnosis, including body fat and water percentage, and muscle mass. To ensure accurate analysis:
- Always step onto the scale barefoot.
- Assurez-vous que vos pieds sont propres et secs.
- Stand still on the scale until all measurements are displayed or transferred to the app.
The scale uses Bioelectrical Impedance Analysis (BIA) to estimate body composition. This method sends a small, safe electrical current through your body. Factors like hydration level can influence results.
3.3 Using the Microlife Connected Health+ App
L'application vous permet de :
- Track your body weight, body fat, water percentage, and muscle mass over time.
- View trends and graphs of your health data.
- Set goals and monitor your progress.
- Receive reminders for health routines (if configured within the app).
Refer to the in-app help section for detailed instructions on using all features of the Microlife Connected Health+ application.
4. Entretien
4.1 Nettoyage de la calamine
Nettoyez la surface du tartre avec un chiffon doux et sec.amp cloth and a mild detergent if necessary. Do not use abrasive cleaners or immerse the scale in water. The glass surface can be slippery when wet, so ensure it is dry before use.
4.2 Remplacement de la batterie
When the battery indicator appears on the display, replace all 4 AAA batteries simultaneously. Use new, high-quality batteries. Dispose of used batteries according to local regulations.
4.3 Stockage
Rangez la balance dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes. Évitez de poser des objets lourds dessus lorsqu'elle n'est pas utilisée.
5. Dépannage
- "Lo" or no display: Batteries are low or incorrectly installed. Replace batteries or check polarity.
- Lectures inexactes :
- Assurez-vous que la balance soit placée sur une surface dure et plane.
- Montez pieds nus sur la balance et restez immobile.
- Calibrate the scale by stepping on it briefly, stepping off, and then stepping on again for measurement.
- Impossible de se connecter à l'application :
- Assurez-vous que Bluetooth est activé sur votre appareil.
- Make sure the scale is within range of your device.
- Redémarrez l'application et/ou votre appareil.
- Re-pair the scale within the app settings.
- Body composition analysis not working:
- Ensure you are stepping on the scale barefoot with clean, dry feet.
- Assurez-vous que votre profile information (age, height, gender) is correctly entered in the app.
If problems persist, contact Microlife customer support.
6. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | 100067 (WS 200) |
| Marque | Microlife |
| Utilisation recommandée | Personal body weight monitoring, body composition analysis |
| Caractéristiques spéciales | Body Fat, Body Water, Muscle Mass, Bodyweight, BMI |
| Connectivité | Bluetooth Smart (for Microlife Connected Health+ App) |
| Type d'affichage | Numérique |
| Limite de poids | 150 kilogrammes |
| Précision de la lecture | Haut |
| Matériel | Plastic, Glass (ITO Electrode) |
| Couleur | Transparent |
| Source d'énergie | Piles 4 x AAA (incluses) |
| Dimensions du produit | 4.5 x 33 x 33 cm |
| Poids de l'article | 300 gramme |
| Fabricant | Anapi |
7. Garantie et assistance
7.1 Informations sur la garantie
The Microlife WS 200 Electronic Personal Scale typically comes with a Garantie 3 ans. Please refer to the warranty card included in your product packaging for specific terms and conditions, as warranty periods and coverage may vary by region and retailer. Keep your purchase receipt as proof of purchase.
7.2 Assistance clientèle
For technical assistance, troubleshooting, or warranty claims, please contact Microlife customer support. Contact details can usually be found on the Microlife official website ou sur l'emballage du produit.
You can also visit the Microlife website for frequently asked questions and additional resources related to your device and the Microlife Connected Health+ app.





