Zexrow W-360

Zexrow Xbox 360 Wired Controller Instruction Manual

Modèle : W-360

1. Introduction

Thank you for choosing the Zexrow Xbox 360 Wired Controller. This gamepad is designed to provide a responsive and comfortable gaming experience across multiple platforms. It features dual vibration feedback, precise controls, and an ergonomic design for extended play sessions. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.

Zexrow Xbox 360 Wired Controller

Figure 1: Zexrow Xbox 360 Wired Controller

2. caractéristiques du produit

Interne view of the Zexrow Xbox 360 Wired Controller highlighting the dual vibration motors for enhanced feedback.

Figure 2: Dual vibration motors provide realistic feedback.

Close-up of the high-precision 8-way directional pad and analog sticks on the Zexrow Xbox 360 Wired Controller.

Figure 3: High-precision D-pad and analog sticks for optimal control.

3. Instructions de configuration

3.1 Connecting to Xbox 360 / Xbox 360 Slim

  1. Ensure your Xbox 360 or Xbox 360 Slim console is powered on.
  2. Locate an available USB port on your console.
  3. Plug the USB connector of the Zexrow controller into the USB port.
  4. The controller will automatically be recognized by the console. The guide button in the center of the controller will illuminate, indicating a successful connection.
Zexrow Xbox 360 Wired Controller connected to an Xbox 360 console, demonstrating compatibility with Xbox 360/Slim and PC.

Figure 4: Controller connected to an Xbox 360 console.

3.2 Connecting to PC (Windows 7/8/10/XP)

  1. Assurez-vous que votre PC est sous tension.
  2. Repérez un port USB disponible sur votre PC.
  3. Plug the USB connector of the Zexrow controller into the USB port.
  4. Your PC will automatically detect and install the necessary drivers. This is a plug-and-play device, so no manual driver installation is typically required.
  5. Once installed, the guide button will illuminate, and the controller will be ready for use in compatible games.

Video 1: Demonstration of the Zexrow Xbox 360 Wired Controller's features and compatibility.

4. Mode d'emploi

The Zexrow Xbox 360 Wired Controller features standard Xbox 360 button layouts and functions. Refer to the diagram below for button identification.

Diagram of Zexrow Xbox 360 Wired Controller components

Figure 5: Labeled diagram of controller components.

4.1 Contrôles de base

4.2 Multiple Controllers

The Zexrow Xbox 360 Wired Controller supports connecting up to four controllers simultaneously to an Xbox 360 console, enabling multiplayer gaming. Each controller will be assigned a quadrant around the Guide button to indicate its player number.

5. Entretien

To ensure the longevity and optimal performance of your Zexrow Xbox 360 Wired Controller, follow these maintenance guidelines:

6. Dépannage

If you encounter issues with your Zexrow Xbox 360 Wired Controller, please refer to the following common solutions:

7. Spécifications

FonctionnalitéDétail
MarqueZexrow
Numéro de modèleW-360
Technologie de connectivitéCâble USB
Appareils compatiblesXbox 360, Xbox 360 Slim, PC (Windows 7/8/10/XP)
Type de contrôleurManette de jeu
Longueur du câble7.2 pieds (environ 2.2 mètres)
Poids de l'article9.9 onces (environ 280 grammes)
Dimensions du colis9.06 x 6.57 x 4.69 pouces

8. Garantie et assistance

No specific warranty information is provided with this product. For technical support or inquiries, please refer to the retailer or manufacturer's contact information provided at the point of purchase. Keep your purchase receipt for any potential warranty claims.

Documents connexes - W-360

Préview Guide de remplacement des moteurs de vibration de la manette filaire Xbox 360 PDP Afterglow
A step-by-step repair guide from iFixit for replacing the vibration motors in a PDP Afterglow Wired Xbox 360 Controller. This guide details the necessary tools, parts, and procedures for safely disassembling the controller, removing old motors, and installing new ones.
Préview Guide des manettes compatibles avec Batocera
Ce guide complet vous explique comment connecter et configurer différentes manettes (USB, Bluetooth, PlayStation, Xbox, Nintendo, etc.) avec le logiciel d'émulation Batocera. Découvrez comment les appairer, résoudre les problèmes et optimiser votre expérience de jeu.
Préview Guide des manettes compatibles avec Batocera
Ce guide complet détaille la compatibilité et la configuration des manettes pour Batocera, un système de jeux rétro open source. Il couvre les manettes USB, Bluetooth et celles de consoles spécifiques comme PlayStation, Xbox, Nintendo, etc., et propose des instructions d'appairage et des conseils de dépannage.
Préview Manuel d'utilisation de la manette sans fil XB-003 pour N-Switch et PC
Découvrez la manette sans fil XB-003, compatible avec la console Nintendo Switch et les PC Windows (mode Xbox 360). Ce manuel d'utilisation fournit des instructions détaillées sur la connexion, le calibrage des capteurs, le chargement et la prise en main des fonctions principales, pour une expérience de jeu optimale grâce à l'axe gyroscopique et aux vibrations à double moteur.
Préview Manettes compatibles avec Batocera : Connectez vos manettes
Découvrez la liste complète des manettes compatibles avec Batocera, notamment les manettes USB, Bluetooth, PlayStation, Xbox, Wii, Switch et rétro. Trouvez des guides d'installation et des conseils de dépannage pour une expérience de jeu optimale.
Préview Guide des contrôleurs compatibles avec Batocera.linux
Guide complet des manettes compatibles avec Batocera.linux, couvrant les manettes USB, Bluetooth et rétro, avec instructions d'installation.