Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Eogifee UC7083T Ceiling Fan Remote Control. This remote is designed as a replacement for original Hampton Bay UC7083T remotes and is compatible with various Hampton Bay and Harbor Breeze ceiling fans that utilize a receiver with matching dip switches. Please read this manual thoroughly before use to ensure proper function and safety.
Consignes de sécurité
- Ensure the ceiling fan's power is turned off at the circuit breaker before any installation or maintenance.
- This remote control is a transmitter only. It requires an existing compatible receiver within your ceiling fan.
- N’exposez pas la télécommande à l’eau ou à une humidité excessive.
- Gardez les piles hors de portée des enfants.
- Jetez les piles usagées de manière responsable conformément aux réglementations locales.
Contenu du colis
- 1 x Eogifee UC7083T Remote Control Transmitter
- 1 x Support mural
- 2 x vis de montage
Note: A 12V "A23" battery is required and is not included in this package. This package does not include a receiver.
Image: The Eogifee UC7083T remote control, its retail packaging, the wall mount bracket, and two mounting screws.
Produit terminéview
Familiarisez-vous avec les boutons et les fonctionnalités de votre télécommande.
Image : Avant view of the Eogifee UC7083T remote control, showing the fan speed buttons (HI, MED, LOW), light control button, and OFF button.
- Bouton lumineux : Controls the ceiling fan light. Press to turn on/off. For incandescent bulbs, press and hold to dim.
- HI Button: Régler la vitesse du ventilateur sur Élevée.
- MED Button: Régler la vitesse du ventilateur sur Moyenne.
- LOW Button: Régler la vitesse du ventilateur sur Faible.
- Bouton OFF : Turns the ceiling fan off.
- Voyant lumineux : Illuminates when a button is pressed. If it stays on, the battery may be low.
Installation
1. Installation de la batterie
- Localisez le couvercle du compartiment à piles à l'arrière de la télécommande.
- Press firmly below the arrow on the cover and slide it off.
- Insert one 12V "A23" battery, ensuring correct polarity (+/-).
- Remettez le couvercle du compartiment à piles.
Image: The back of the remote control with the battery compartment open, revealing the slot for a 12V "A23" battery and the four dip switches.
2. Setting the Dip Switches
The remote control and your ceiling fan's receiver must have matching dip switch settings to communicate. There are 16 possible code combinations.
- Identify Receiver Dip Switches: Locate the dip switches on your ceiling fan's receiver. This is typically found within the fan's canopy or motor housing. Note the current ON/OFF (or UP/DOWN) positions of these switches.
- Access Remote Dip Switches: With the battery cover removed from your Eogifee UC7083T remote, you will see four small switches (numbered 1-4) inside the battery compartment.
- Paramètres du match : Using a small screwdriver or a pen, slide the dip switches on the remote control to match the exact ON/OFF (or UP/DOWN) positions of the dip switches on your ceiling fan's receiver. All four switches must match.
- Replacez le couvercle des piles sur la télécommande.
Remarque importante : Before setting the code, ensure your fan is operated in "HIGH speed" and the light is in the "ON" condition at the switch knob (if applicable) for optimal setup.
Image: The retail packaging for the Eogifee UC7083T remote control, displaying detailed instructions for setting the dip switches on both the transmitter and receiver.
3. Installation murale
The included wall mount bracket allows for convenient storage of your remote control.
- Choisissez un emplacement approprié sur un mur, à l'abri de la lumière directe du soleil ou des sources de chaleur.
- Use the wall mount bracket as a template to mark the positions for the two mounting screws.
- Percez des trous pilotes si nécessaire.
- Fixez le support mural au mur à l'aide des vis fournies.
- Slide the remote control into the mounted bracket.
Image: The Eogifee UC7083T remote control shown alongside its wall mount bracket, illustrating how the remote fits into the bracket.
Mode d'emploi
Once the dip switches are matched and the battery is installed, your remote is ready for use.
- Contrôle de la vitesse du ventilateur :
- Presse HI for high fan speed.
- Presse MÉDI pour une vitesse de ventilateur moyenne.
- Presse FAIBLE pour une faible vitesse de ventilation.
- Presse DÉSACTIVÉ pour éteindre le ventilateur.
- Contrôle de la lumière :
- Appuyez sur le Bouton lumineux pour allumer ou éteindre la lumière.
- If using incandescent bulbs, press and hold the Bouton lumineux to dim or brighten the light. Release when the desired brightness is reached.
- Note: If using LED bulbs, the light button will typically only control on/off functionality and may not support dimming, depending on the LED bulb and fan receiver capabilities.
Image: A hand holding the Eogifee UC7083T remote control, with a ceiling fan and its lights visible in the background, illustrating the remote in active use.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Remote does not control the fan/light. |
|
|
| Le voyant reste allumé. | Batterie faible. | Replace the 12V "A23" battery. |
| La lumière ne faiblit pas. |
|
|
| Fan does not reverse direction. | This remote does not have a reverse function. | The UC7083T remote control does not support fan reverse. This function is typically controlled by a switch on the fan motor housing itself. |
Caractéristiques
- Modèle: UC7083T
- Marque: Eogifee
- Source d'alimentation : 1 x 12V "A23" battery (not included)
- Dimensions: Environ 4 x 2 x 0.01 pouces (10.16 x 5.08 x 0.025 cm)
- Poids: Environ 3.2 onces (90.7 grammes)
- Compatibilité: Hampton Bay and Harbor Breeze ceiling fans with UC7083T compatible receivers.
- Caractéristiques: 3-speed fan control (High, Medium, Low), Light On/Off, Light Dimming (for incandescent bulbs).
Entretien
- Nettoyez la télécommande avec un chiffon doux et sec. N’utilisez pas de produits nettoyants abrasifs ni de solvants.
- Si la télécommande n'est pas utilisée pendant une période prolongée, retirez la pile pour éviter les fuites.
- Replace the battery when the indicator light stays on or when the remote's range decreases.
Garantie et assistance
For warranty information or technical support, please refer to the seller's contact information or visit the Eogifee store on Amazon. Keep your purchase receipt for warranty claims.
Eogifee Store: Visit the Eogifee Store on Amazon
