Crivit 3D Sensor Pedometer Instruction Manual

Introduction

This manual provides essential information for the proper use and maintenance of your Crivit 3D Sensor Pedometer, Model 307012. This device is designed to track your physical activity, including steps, distance, and calories burned, using advanced 3D sensor technology. Please read these instructions carefully before using the pedometer to ensure optimal performance and longevity.

Caractéristiques

• 3D Sensor Technology: Allows for accurate step counting regardless of placement (e.g., pocket, keychain).
• Affichage multifonction : Shows number of steps, distance, duration, speed, calorie consumption, fat burn, temperature, and current time.
• 7-Day Memory: Stores activity data for the past seven days.
• Paramètres personnalisés : Individual adjustment for body height, weight, and stride length for improved accuracy.
• Écran LCD rétroéclairé : Offre une visibilité optimale dans diverses conditions d'éclairage.
• Attachment Clip: Pour un transport sûr et pratique.
• Batterie incluse : Operates with one CR2032 3V battery.

Produit terminéview

Image: The Crivit 3D Sensor Pedometer, featuring a red casing, an LCD screen, and an integrated clip for attachment. The display shows numerical data.

Installation

1. Installation de la batterie

1. Repérez le compartiment à piles à l'arrière du podomètre.
2. Use a small coin or screwdriver to open the battery cover.
3. Insert one CR2032 3V battery with the positive (+) side facing up.
4. Remettez le couvercle de la batterie et fixez-le.

2. Paramètres initiaux

Upon first use or after battery replacement, you will need to set your personal data for accurate tracking.

1. Réglage de l'heure : Follow the on-screen prompts to set the current time (12-hour or 24-hour format).
2. Sélection de l'unité : Choose between metric (cm/kg) or imperial (inches/lbs) units.
3. Hauteur: Entrez votre taille.
4. Poids: Enter your body weight.
5. Longueur de foulée: Measure and enter your average stride length. This can be estimated by walking 10 steps, measuring the total distance, and dividing by 10.
6. Confirm all settings to save.

Mode d'emploi

1. Marche/Arrêt

• The pedometer typically powers on automatically when activity is detected or a button is pressed.
• To conserve battery, the device may enter a sleep mode after a period of inactivity. Press any button to wake it up.

2. Navigation dans les modes d'affichage

Use the mode button (usually labeled 'MODE' or similar) to cycle through different display screens:

• Mesures: Displays the total number of steps taken for the current day.
• Distance: Indique la distance totale parcourue.
• Calories: Indique le nombre estimé de calories brûlées.
• Durée: Displays the active time.
• Vitesse: Shows your average speed.
• Brûler les graisses : Displays an estimate of fat burned.
• Température: Affiche la température ambiante.
• Temps: Affiche l'heure actuelle.

3. Resetting Daily Data

To reset the daily activity data (steps, distance, calories) to zero, typically press and hold the 'RESET' button for a few seconds while on the main display screen. Refer to the specific button layout on your device.

4. Accessing 7-Day Memory

The pedometer stores data for the past seven days. Use the 'MEMORY' or 'HISTORY' button (if available) to review previous days' activity. The display will typically show the date and the corresponding activity data.

Entretien

Nettoyage

Wipe the pedometer with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Avoid submerging the pedometer in water.

Remplacement de la batterie

When the battery indicator appears low or the display becomes dim, replace the CR2032 3V battery following the installation steps in the 'Setup' section. Dispose of used batteries responsibly according to local regulations.

Stockage

Store the pedometer in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

Dépannage

• Podomètre ne comptant pas les pas :
  - Ensure the battery is correctly installed and charged.
  - Check if the device is securely attached or placed in a pocket where movement can be detected.
  - Verify that personal settings (stride length, height) are correctly entered.
• L'écran est vide ou sombre :
  - Replace the battery.
  - Ensure the battery is inserted with correct polarity.
• Lectures inexactes :
  - Re-enter your personal settings (height, weight, stride length).
  - Ensure the pedometer is not subjected to excessive shaking or vibrations that are not related to walking.
• Les boutons ne répondent pas :
  - Try removing and reinserting the battery to perform a soft reset.
  - Ensure the buttons are not obstructed.

Caractéristiques

Garantie et assistance

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Crivit webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.