BINGFU BFN00458

BINGFU Ham Radio Antenna Adapter Instruction Manual

Model: BFN00458

Introduction

This manual provides essential information for the proper use and installation of your BINGFU SMA Female to UHF SO239 Female RG58 Coaxial Jumper Cable. This adapter cable is designed to connect handheld two-way radios with an SMA male antenna port to external antennas with a UHF SO239 female connector, facilitating enhanced signal transmission and reception.

Produit terminéview

The BINGFU antenna adapter cable features an SMA Female connector on one end and a UHF SO239 Female connector on the other, interconnected by a durable RG58 coaxial cable. This design allows for flexible and secure connections between various radio equipment and antennas.

BINGFU SMA Female to UHF SO239 Female RG58 Coaxial Jumper Cable

Image 1 : Terminéview of the BINGFU SMA Female to UHF SO239 Female RG58 Coaxial Jumper Cable.

Composants clés :

Close-up of SMA Female and UHF SO239 Female connectors on the BINGFU cable

Image 2 : Détail view of the SMA Female and UHF SO239 Female connectors.

Caractéristiques

FonctionnalitéDétail
Numéro de modèleBFN00458
Connecteur 1SMA Female (50 Ohm)
Connecteur 2UHF SO239 Female (50 Ohm)
Type de câbleCâble coaxial RG58
Longueur du câble30 cm (12 inches / 1 foot)
Impédance50 ohms
Dimensions du produit6.69 x 0.51 x 4.72 pouces
PoidsEnviron 1.45 onces (50 g)

Configuration et installation

  1. Identifier les connecteurs : Locate the SMA Male antenna port on your handheld radio and the PL259 Male connector on your external antenna or antenna feedline.
  2. Se connecter à la radio : Carefully screw the SMA Female end of the BINGFU adapter cable onto the SMA Male antenna port of your handheld radio. Ensure a snug fit, but do not overtighten.
  3. Connect to Antenna/Feedline: Screw the UHF SO239 Female end of the BINGFU adapter cable onto the PL259 Male connector of your external antenna or antenna feedline. Ensure a secure connection.
  4. Positionnement : Position the cable to avoid sharp bends or kinks, which can damage the coaxial cable and affect performance. The flexibility of the RG58 cable helps reduce strain on the radio's connector.
Close-up of the SMA Female connector for radio connection

Image 3: The SMA Female connector, designed for handheld radio connection.

Close-up of the UHF SO239 Female connector for antenna connection

Image 4: The UHF SO239 Female connector, designed for external antenna connection.

Opération

Once properly installed, the BINGFU adapter cable facilitates the connection between your handheld radio and a larger, more efficient external antenna. This allows for improved signal range and clarity compared to using the radio's stock antenna. Ensure your radio and antenna are correctly tuned for the frequencies you intend to use.

Compatibilité

This adapter cable is compatible with a wide range of handheld two-way radios and ham radios that feature an SMA Male antenna connector, and external antennas with a PL259 Male connector. Below is a list of commonly compatible radio models:

Compatible Ham Radio Models:

Entretien

Dépannage

Issue: Poor Signal Quality or No Signal

Issue: Connector Does Not Fit

Garantie et assistance

For warranty information or technical support regarding your BINGFU antenna adapter cable, please refer to the product packaging or contact BINGFU customer service directly. Contact details can typically be found on the manufacturer's official websur le site ou auprès de votre point de vente.

Fabricant: Bingfu

Date de mise en ligne sur Amazon : 1 janvier 2020

Documents connexes - BFN00458

Préview Bingfu RF Connector Usage Guidelines
Concise guidelines for the proper installation and use of Bingfu RF connectors to ensure optimal performance and longevity.
Préview Bingfu Antenna Usage Tips and Best Practices
Essential tips for proper installation, maintenance, and usage of Bingfu antennas to ensure optimal performance and compliance with regulations. Covers interference, power output, and environmental factors.
Préview BINGFU RF Cable Usage Tips and Guidelines
Essential tips for handling, using, and storing BINGFU RF cables to ensure optimal performance and longevity. Includes guidelines on bending, connectors, environmental protection, and storage.
Préview Configuration d'une station de base/récepteur GPS/GNSS à petit budget avec ESP32 et UM980
Découvrez comment construire une station de base ou un récepteur GPS/GNSS économique à l'aide du microcontrôleur ESP32 et du module Unicorecomm UM980. Ce guide présente le matériel, le micrologiciel et la configuration nécessaires à la création d'un système de localisation haute précision personnalisé.