Bryton Rider 320 GPS Cyclocomputer User Manual

1. Introduction

The Bryton Rider 320 is a high-performance GPS cyclocomputer designed for cyclists seeking comprehensive ride data. It features a clear 2.3-inch LCD display, long battery life, and support for various sensors to track speed, cadence, and heart rate. This manual provides essential information for setting up, operating, and maintaining your device.

Image: Bryton Rider 320 GPS Cyclocomputer device.

2. Contenu de la boîte

Upon opening your Bryton Rider 320 package, verify that all components are present:

• Bryton Rider 320 GPS Cyclocomputer
• USB Cable (Micro USB)
• Capteur de fréquence cardiaque
• Support de guidon
• Manuel d'instructions (ce document)

Note: The specific contents may vary slightly depending on the purchased bundle (e.g., "T" bundle includes sensors).

3. Installation

3.1 Chargement de l'appareil

Before first use, fully charge your Rider 320. Connect the provided Micro USB cable to the device's charging port and plug the other end into a USB power adapter or computer. The device will indicate charging status. A full charge provides approximately 35 hours of battery life.

3.2 Montage de l'appareil

Attach the handlebar mount to your bicycle's handlebars or stem using the provided O-rings or zip ties. Ensure the mount is secure and positioned for optimal viewing. Align the Rider 320 with the mount and twist it clockwise until it locks into place.

3.3 Appairage des capteurs

The Rider 320 supports Bluetooth and ANT+ sensors. To pair a sensor (e.g., heart rate, cadence, speed):

1. Power on your Rider 320.
2. Aller à la Paramètres menu.
3. Sélectionner Capteurs et puis Ajouter un capteur.
4. Activate the sensor (e.g., wear the heart rate strap, spin the crank for cadence).
5. The Rider 320 will scan for available sensors. Select your sensor from the list to pair it.
6. Confirmer l'appairage.

Note: Ensure sensors are within range and have working batteries.

3.4 Configuration initiale

Upon first power-on or after a factory reset, you will be prompted to set basic preferences:

• Langue: Sélectionnez votre langue préférée.
• Unités: Choose between Metric (km/h, km) or Imperial (mph, miles).
• Fuseau horaire: Définissez votre fuseau horaire local.
• Utilisateur Profile: Enter basic information like age, weight, and height for accurate calorie and training calculations.

3.5 Bryton Active App Connection

The Bryton Active app (available for iOS and Android) enhances your Rider 320 experience. Download the app and create an account. To connect your device:

1. Activez le Bluetooth sur votre smartphone.
2. Open the Bryton Active app and navigate to the device pairing section.
3. On your Rider 320, go to Paramètres > Bluetooth > Jumeler avec l'application.
4. Suivez les instructions à l'écran dans l'application pour terminer le processus d'appairage.

The app allows for display customization, firmware updates, and automatic ride data synchronization.

Image: Bryton Rider 320 display showing various data fields.

4. Utilisation de l'appareil

4.1 Mise sous/hors tension

• Mise sous tension : Press and hold the power button (usually on the side or bottom) until the Bryton logo appears.
• Éteindre: Maintenez le bouton d'alimentation enfoncé jusqu'à ce qu'un message d'arrêt apparaisse, puis confirmez.

4.2 Navigation de base

The Rider 320 typically uses physical buttons for navigation. Refer to the device's button layout for specific functions:

• Boutons HAUT/BAS : Navigate through menus or change data pages during a ride.
• OK/ENTER button: Confirmez vos sélections ou démarrez/arrêtez l'enregistrement.
• BACK/LAP button: Go back in menus or mark a lap during a ride.

4.3 Démarrer un trajet

1. Ensure the device has acquired a GPS signal (indicated by a solid GPS icon).
2. Appuyez sur le OK/ENTRER button to start recording your ride.
3. During the ride, you can switch between data pages using the UP/DOWN buttons.
4. Pour faire une pause, appuyez sur la touche OK/ENTRER button. To resume, press it again.
5. To end and save the ride, press and hold the OK/ENTRER button, then confirm saving.

4.4 Personnalisation de l'affichage

The Rider 320 allows extensive customization of its data display pages. This can be done directly on the device or more conveniently through the Bryton Active app. You can select which data fields (e.g., speed, distance, heart rate, cadence, power, altitude) appear on each page and the number of fields per page.

4.5 Fonctionnalités GPS

The integrated GPS sensor provides accurate tracking of your location, speed, distance, and altitude. For best GPS performance, ensure the device has a clear view of the sky when starting a ride.

4.6 Synchronisation des données

After completing a ride, you can synchronize your data to the Bryton Active app via Bluetooth. Once synced to the app, your ride data can be automatically uploaded to third-party platforms like Strava, TrainingPeaks, or Komoot, if configured in the app settings.

5. Entretien

5.1 Nettoyage

Nettoyez régulièrement l'appareil avec un chiffon doux et sec.amp chiffon. Évitez d'utiliser des produits chimiques agressifs ou des nettoyants abrasifs, qui peuvent endommager l'écran ou le câble.asing. Ensure the USB port cover is securely closed to maintain its IP54 water resistance rating.

5.2 Entretien de la batterie

Pour optimiser la durée de vie de la batterie :

• Évitez les températures extrêmes pendant la charge et le stockage.
• Ne laissez pas l'appareil complètement déchargé pendant des périodes prolongées.
• For long-term storage, charge the device to approximately 50-70%.

5.3 mises à jour du micrologiciel

Bryton periodically releases firmware updates to improve performance, add features, and fix bugs. It is recommended to keep your device's firmware up to date. Updates can typically be performed via the Bryton Active app or by connecting the device to a computer and using Bryton's update tool.

6. Dépannage

6.1 Problèmes de signal GPS

• Pas de signal: Assurez-vous d'être à l'extérieur avec une vue dégagée. view du ciel. Évitez les immeubles de grande hauteur ou les zones densément boisées.
• Acquisition lente : Allow a few minutes for the device to acquire a signal, especially if it's been moved a significant distance since its last use.

6.2 Problèmes de connexion des capteurs

• Sensor Not Found: Check if the sensor is active (e.g., spinning the wheel/crank, wearing the heart rate strap). Ensure the sensor's battery is not depleted.
• Ingérence: Éloignez-vous des autres appareils électroniques susceptibles de provoquer des interférences.
• Réparation: Try unpairing and re-pairing the sensor through the device settings.

6.3 Bryton Active App Sync Issues

• Échec de la connexion : Ensure Bluetooth is enabled on your phone and the Rider 320. Restart both the device and the app.
• Synchronisation lente : Data transfer can sometimes be slow. Ensure a stable Bluetooth connection and sufficient battery on both devices.
• Data Loss (Rare): If you experience data loss or persistent sync issues, try updating the device firmware and reinstalling the app. Contact Bryton support if problems persist.

6.4 Appareil ne répond pas

If the device freezes or becomes unresponsive, perform a soft reset by pressing and holding the power button for approximately 10-15 seconds until it powers off. Then, power it back on normally.

7. Spécifications

8. Garantie et assistance

Bryton products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Bryton website. For technical support, troubleshooting assistance, or service inquiries, please contact Bryton customer support through their official website ou centres de service agréés.

Bryton officiel Website: www.brytonsport.com