Manuels+

Lepro 410084-RGB-US-NF-a

Lepro 32.8ft RGB LED Strip Lights User Manual

Model: 410084-RGB-US-NF-a

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.

Lepro 32.8ft RGB LED Strip Lights kit showing two rolls of LED strips, a remote control, and a power adapter.

Figure 1: Complete Lepro LED Strip Lights Kit

2. Contenu du colis

Vérifiez que tous les composants sont présents dans le package :

  • 2 x 16.4ft (5m) RGB LED Strip Lights
  • 1 x 44-Key IR Remote Control
  • 1 x adaptateur secteur 12V
  • 1 x Control Box (IR Receiver)

3. Installation et configuration

Suivez ces étapes pour une installation correcte :

  1. Préparez la surface : Assurez-vous que la surface d'installation soit propre, sèche et lisse. La poussière, l'huile ou l'humidité peuvent nuire à l'adhérence.
  2. Mesurer et couper (facultatif) : If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
  3. Fixez la bande : Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
  4. Connecter les composants :
    • Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
    • Connect the 12V power adapter to the control box.
    • Branchez l'adaptateur secteur sur une prise électrique standard.
  5. Activer la télécommande : Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Diagram showing the connection of LED strip lights to the control box and power adapter, with an arrow indicating to pull out the plastic chip from the remote.

Figure 2: Connection Diagram for LED Strip Lights

For a visual guide on installation and various applications, please refer to the official product video below:

Video 1: Official Lepro LED Strip Lights Overview et application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.

4. Mode d'emploi

The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.

44-key IR remote control for LED strip lights, showing buttons for colors, brightness, and dynamic modes.

Figure 3: 44-Key IR Remote Control Layout

Fonctions de la télécommande :

  • Marche/Arrêt : Power button to turn the lights on or off.
  • Réglage de la luminosité : Up/Down arrows to increase or decrease brightness.
  • Sélection de couleur : 20 preset static colors, including Red, Green, Blue, and White.
  • Couleurs à faire soi-même : 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
  • Modes dynamiques : 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.

5. Entretien

To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:

  • Nettoyage: Essuyez délicatement les bandes LED avec un chiffon doux et sec pour enlever la poussière. Évitez d'utiliser des nettoyants liquides ou des matériaux abrasifs.
  • Environnement: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
  • Entretien de l'adhésif : The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.

6. Dépannage

If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:

ProblèmeCause possibleSolution
Les lumières ne s'allument pas.
  • Adaptateur secteur non connecté.
  • Remote battery depleted or plastic tab not removed.
  • Incorrect connection between strip and control box.
  • Ensure power adapter is securely plugged into outlet and control box.
  • Remove plastic tab from remote battery. Replace battery if necessary.
  • Verify arrow alignment on all connectors.
La télécommande ne fonctionne pas.
  • Remote not pointed at IR receiver.
  • Obstruction entre la télécommande et le récepteur.
  • Remote battery issue.
  • Point remote directly at the small black IR receiver on the control box.
  • Retirez toutes les obstructions.
  • Check/replace remote battery.
Some LEDs show incorrect color or are off.
  • Damage to a section of the LED strip.
  • Connexion défectueuse.
  • Inspect the strip for physical damage. If a section is damaged, it may require replacement.
  • Assurez-vous que toutes les connexions sont sécurisées.
LED strip falls off surface.
  • Surface non propre ou non lisse.
  • Pression insuffisante lors de l'installation.
  • Nettoyez soigneusement la surface avant de réappliquer le produit.
  • Apply firm, even pressure along the entire strip during installation. Consider using additional adhesive clips for heavy-duty applications.

7. Spécifications du produit

FonctionnalitéDétail
MarqueLépreux
Numéro de modèle410084-RGB-US-NF-a
CouleurRVB (rouge, vert, bleu)
Utilisation intérieure/extérieureIntérieur
Dossier spécialGradable
Type de source lumineuseDIRIGÉ
Source d'énergieÉlectrique avec fil
MatérielCuivre, plastique
Type de contrôleurTélécommande
Nombre de sources lumineuses300 (total for 32.8ft)
Voltage12 volts
Quoitage36 watts
Poids de l'article0.33 kilogrammes (11.6 onces)
Longueur de l'article32.8 Feet (2 x 16.4ft)

8. Informations sur la garantie

Ce produit est couvert par une Garantie de 2 ans from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9. Assistance clientèle

For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.