Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your GROHE Eurocube Pressure Balance Valve Trim with Cartridge. Please read these instructions carefully before beginning installation or use to ensure optimal performance and longevity of the product.
Image : Avant view of the GROHE Eurocube Pressure Balance Valve Trim with Cartridge in StarLight Chrome finish.
Consignes de sécurité
Observe all local plumbing and building codes. Ensure water supply is turned off before installation or maintenance. If you are unsure about any part of the installation process, consult a qualified plumber. Use appropriate personal protective equipment (PPE) such as safety glasses and gloves.
Contenu du colis
- Poignée
- Plaque de finition
- Pressure balance cartridge
Note: The GrohSafe 3.0 Rough-in Valve is required for installation and is sold separately.
Configuration et installation
Installation of the GROHE Eurocube Pressure Balance Valve Trim requires a pre-installed GrohSafe 3.0 Rough-in Valve. Follow the instructions provided with the rough-in valve for its installation. Once the rough-in valve is in place, proceed with the trim installation as follows:
- Préparer la vanne d'encastrement : Ensure the rough-in valve is securely mounted and all connections are watertight.
- Install the Pressure Balance Cartridge: Insert the pressure balance cartridge into the rough-in valve body. Ensure it is seated correctly and secured according to the rough-in valve's instructions. This cartridge is designed for simplified installation and maintenance.
- Attach the Trim Plate: Position the trim plate over the rough-in valve and secure it to the wall. The design features concealed mounting for a clean aesthetic without visible screws.
- Installer la poignée : Attach the handle to the cartridge stem. Test for smooth operation. The metal lever handle is designed for durability and effortless movement.
- Test de fuites : Ouvrez lentement l'arrivée d'eau et vérifiez l'étanchéité de tous les raccords.
Image : éclatée view highlighting key features such as GROHE StarLight finish, concealed mounting, double ceramic discs, pressure balance cartridge, and metal lever handle.
Mode d'emploi
The GROHE Eurocube Pressure Balance Valve Trim provides precise control over water temperature and flow.
- Contrôle de la température : Rotate the handle to adjust the water temperature. The double ceramic pressure balance cartridge ensures consistent water temperature and prevents sudden changes due to pressure fluctuations.
- Contrôle de flux : Push or pull the handle to turn the water on or off and to adjust the flow rate. The ceramic disc mixing valve provides smooth handle operation and drip-free performance.
Entretien
Regular cleaning and occasional inspection will help maintain the appearance and functionality of your GROHE Eurocube valve trim.
- Nettoyage: Clean the StarLight Chrome finish with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
- Inspection de la cartouche : If you experience issues with water temperature consistency or flow, the pressure balance cartridge may need inspection or replacement. The one-piece cartridge design simplifies maintenance.
- Clapets anti-retour: Integrated check valves are engineered to eliminate cross-flow. No specific user maintenance is typically required for these components.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Débit d'eau nul ou faible débit | Water supply off, clogged cartridge, debris in lines. | Check water supply. Inspect and clean or replace cartridge. Flush water lines. |
| Température de l'eau irrégulière | Pressure balance cartridge issue, hot/cold supply imbalance. | Inspect pressure balance cartridge for debris or damage. Ensure adequate hot and cold water pressure. |
| Fuite au niveau de la poignée ou de la plaque de garniture | Loose connections, damaged O-rings, faulty cartridge. | Check and tighten connections. Inspect and replace O-rings or cartridge if damaged. |
Si les problèmes persistent après avoir essayé ces solutions, contactez un plombier qualifié ou le service client de GROHE.
Caractéristiques
- Numéro de modèle : 14469000
- Matériel: Métal
- Finition extérieure: Chrome (Chrome StarLight)
- Dimensions de l'article (L xlxh): 6.25 x 3.25 x 6.5 pouces
- Poids de l'article : 2 livres
- Type de valve: Valve d'équilibrage de pression
- Type de fil : GrohSafe 3.0
- Composants inclus : Handle, trim plate, pressure balance cartridge
Image: Dimensional drawing indicating the length/width of the valve trim as 6 1/4 inches (158.5mm).
Informations sur la garantie
According to product information, this item has Aucune garantie from the manufacturer. Please refer to your retailer's return policy for details on product returns or exchanges.
Assistance clientèle
For further assistance or inquiries, please visit the official GROHE webVous pouvez consulter leur site web ou contacter leur service client. Vous pouvez également vous adresser au revendeur auprès duquel vous avez acheté le produit pour obtenir de l'aide.
GROHE Store Link: Visitez la boutique GROHE sur Amazon
