1. Introduction
Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.
2. Consignes de sécurité
Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.
- Ne pas dépasser la capacité de poids maximale de 17.6 lb (8 kg).
- Assurez-vous que la surface du bureau est stable et suffisamment solide pour supporter le poids combiné du support et de l'écran.
- Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
- Use all provided hardware and follow the installation steps precisely.
- Tenir les enfants et les animaux domestiques éloignés pendant l’installation.
3. Liste de colisage
Avant de commencer l'installation, vérifiez que tous les composants sont présents et non endommagés.
Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.
Le forfait doit comprendre :
- Ensemble bras de moniteur (bras supérieur et inférieur)
- Poteau de bureau
- Cl-Camp Base
- Composants de base à œillet
- Plaque VESA
- All necessary screws, washers, and Allen keys
- Manuel d'instructions
4. Configuration et installation
Choisissez entre C-Clamp or Grommet mounting based on your desk type and preference.
Figure 4.1: The monitor mount offers both C-Clamp et options de montage par œillet.
4.1 C-Clamp Installation
- Attachez le C-clamp base to the desk pole using the provided screws and Allen key.
- Position the assembled clamp and pole on the edge of your desk.
- Serrer le C-clamp Vissez jusqu'à ce que le support soit solidement fixé au bureau. Assurez-vous qu'il est stable et ne vacille pas.
4.2 Installation des œillets
- Démontez le C-clamp by removing the screw and plate.
- Insert the desk pole through the grommet hole in your desk.
- Secure the pole from underneath the desk using the grommet base plate and tightening knob.
4.3 Attaching VESA Plate to Monitor
- Posez délicatement votre écran face vers le bas sur une surface douce et propre.
- Alignez la plaque VESA avec les trous de montage à l'arrière de votre moniteur (75x75 mm ou 100x100 mm).
- Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.
4.4 Attaching Monitor to Arm
- Faites glisser la plaque VESA avec le moniteur fixé sur la tête de montage du bras du moniteur.
- Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.
4.5 Gestion des câbles
Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.
Figure 4.2: Effective cable management keeps your desk organized.
4.6 Guide vidéo d'installation
Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).
5. Fonctionnement et réglages
The MOUNTUP monitor arm offers full motion capabilities for optimal viewconfort.
Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.
5.1 Réglage de la tension du ressort à gaz
Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.
Figure 5.2: Adjusting the gas spring tension for optimal monitor support.
- If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
- If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.
5.2 Réglage de l'inclinaison
The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewangles d'inclinaison.
- Loosen the tilting bolt on the VESA plate.
- Position the screen to your desired angle.
- Retighten the tilting bolt to fix the angle.
5.3 Pivotement et rotation
The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.
Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.
- Lower Arm Swivel: ±135°
- Upper Arm Swivel: ±180°
- Screen Swivel: ±90°
- Screen Rotation: 360°
5.4 Adjustment Video Guide
Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).
Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.
6. Entretien
Un entretien régulier garantit la longévité et les performances optimales de votre support de moniteur.
- Nettoyage: Essuyez le support avec un chiffon doux et sec.amp Chiffon. Évitez les nettoyants abrasifs ou les solvants qui pourraient endommager la finition.
- Inspection: Vérifiez régulièrement le serrage et la fixation de toutes les vis et connexions. Resserrer si nécessaire.
- Ressort à gaz : If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.
7. Dépannage
En cas de problème, veuillez consulter la liste des problèmes courants et leurs solutions ci-dessous :
- Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
- Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
- Mount feels unstable or wobbly: Assurez-vous que le C-clamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
- Difficulty moving the arm: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.
Si les problèmes persistent, veuillez contacter le service client.
8. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Numéro de modèle | MU0025 |
| Taille d'écran compatible | 17 à 32 pouces |
| Capacité de poids | 4.4 - 17.6 lbs (2 - 8 kg) |
| Compatibilité VESA | 75x75mm, 100x100mm |
| Type de montage | Cl-Camp / Base à œillet |
| Cl-Camp Épaisseur du bureau | 0.39" - 3.15" (10-80 mm) |
| Épaisseur du bureau à œillets | 0.39" - 3.15" (10-80 mm) |
| Diamètre du trou passe-câble | 0.39" - 2.36" (10-60 mm) |
| Matériel | Acier, aluminium, plastique |
| Couleur | Noir |
| Max Height (from desk) | 22.64" (57.5 cm) |
| Extension maximale | 19.8" (50.3 cm) |
| Plage d'inclinaison | +90° / -45° |
| Pivotement de l'écran | ±90° |
| Rotation de l'écran | 360° |
9. Garantie et assistance
All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.
