JTECH ServerCall Transmitter Paging System User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your JTECH ServerCall Transmitter Paging System. Please read this manual thoroughly before operating the system to ensure proper function and longevity.

2. Contenu du colis

Vérifiez que tous les éléments sont présents dans votre colis :

• ServerCall Transmitter Unit
• 24 Rugged Pagers
• Multi-Pager Charging Base(s) (quantity may vary based on configuration)
• Adaptateur secteur pour émetteur
• Power Adapter(s) for Charging Base(s)
• Antenne pour émetteur
• Manuel de l'utilisateur (ce document)

Image: A single JTECH rugged pager, displaying the number '2'. These pagers are designed for durability.

Image: A multi-pager charging base with several pagers docked, indicating they are charging.

3. Installation

1. Déballer les composants : Retirez soigneusement tous les composants de l'emballage.
2. Connect Transmitter Antenna: Screw the antenna securely into the designated port on the back of the ServerCall Transmitter unit.
3. Alimentation de l'émetteur : Plug the transmitter's power adapter into the power input port on the transmitter, then plug the adapter into a standard electrical outlet. The transmitter display should illuminate.
4. Position Charging Base(s): Place the charging base(s) in a convenient location, ensuring access to electrical outlets.
5. Connect Charging Base Power: Plug the charging base power adapter(s) into the charging base(s), then into standard electrical outlets.
6. Téléavertisseurs de charge : Place all 24 pagers onto the charging base(s). Ensure each pager makes proper contact with the charging pins. The pagers should indicate charging status (e.g., an indicator light). Allow pagers to charge fully before first use (typically 4-6 hours).

Image: The JTECH ServerCall Transmitter unit, showing its display and control buttons.

4. Mode d'emploi

4.1. Paging Individual Pagers

1. Ensure the desired pager is powered on and within range.
2. On the ServerCall Transmitter, locate the numbered button corresponding to the pager you wish to call (e.g., button '1' for pager '1').
3. Press the numbered button once. The pager will vibrate, flash, or beep according to its programmed alert mode.
4. The transmitter display may show confirmation or the pager number being called.

4.2. Paging Manager Groups

The system includes dedicated buttons for paging manager groups (MGR 91, MGR 92, MGR 93, MGR 94).

1. To page a specific manager group, press the corresponding MGR bouton (par exemple, MGR 91).
2. All pagers assigned to that manager group will receive the alert.

4.3. Paging All Pagers

To page all active pagers simultaneously:

• Appuyez sur le TOUTES LES PAGES bouton sur l'émetteur.
• All 24 pagers will receive the alert.

4.4. Cancelling a Page

If a page needs to be cancelled or cleared from the system:

• Appuyez sur le ANNULER bouton sur l'émetteur.
• The display may show "CANCEL PANEL". Follow on-screen prompts or press ENTRER to confirm cancellation of active pages.

Image: The ServerCall Transmitter display indicating "CANCEL PANEL", used for clearing active pages.

4.5. Using Menu and Setup Functions

Le MENU et INSTALLATION buttons provide access to advanced system configurations. Refer to the on-screen prompts for specific settings such as time adjustment, pager programming, or alert modes.

• Presse 2X MENU for quick access to common menu options.
• Presse 3X SELECT to cycle through options within a menu.
• Presse INSTALLATION to enter the system setup menu.
• Utiliser ENTRER pour confirmer les sélections et ANNULER to exit menus without saving changes.

5. Entretien

5.1. Nettoyage

• Wipe the transmitter, pagers, and charging base with a soft, damp tissu.
• N’utilisez pas de nettoyants abrasifs, de solvants ou de produits chimiques agressifs.
• Ensure all devices are dry before reconnecting to power.

5.2. Battery Care (Pagers)

• Keep pagers charged when not in use to maintain battery health.
• Avoid fully discharging pager batteries frequently.
• If pagers will be stored for an extended period, charge them fully, then store them in a cool, dry place. Recharge periodically (e.g., every 3 months) to prevent deep discharge.

6. Dépannage

7. Spécifications

• Modèle: ServerCall Transmitter Paging System (B085L154BY)
• Fabricant: JTECH
• Pagers Included: 24 Rugged Pagers
• Source d'alimentation : AC Power Adapters (included)
• Fréquence de fonctionnement : (Information not provided, typically in UHF band)
• Gamme: (Information not provided, varies by environment)
• Dimensions: (Information not provided)
• Poids: (Information not provided)

Note: Specific technical specifications such as operating frequency, range, dimensions, and weight are not provided in the product details. For detailed technical specifications, please refer to the official JTECH product page or contact JTECH support.

8. Informations sur la garantie

The JTECH ServerCall Transmitter Paging System is covered by a standard manufacturer's warranty. For specific details regarding warranty duration, coverage, and claims process, please refer to the warranty card included with your product or visit the official JTECH webConsultez le site. Conservez votre preuve d'achat pour toute demande de garantie.

9. Assistance clientèle

If you encounter any issues not covered in this manual or require further assistance, please contact JTECH Customer Support:

• Website: Visit the JTECH Store on Amazon (pour information générale)
• For direct technical support, please refer to the contact information provided in your product packaging or on the official JTECH corporate website.