1. Introduction
The Lumisky Porto 50 is a solar-powered LED garden terminal light designed to illuminate outdoor spaces such as gardens, pathways, and driveways. This elegant and discreet light features a warm white LED and operates autonomously, charging during the day and lighting up at night. It is constructed from durable steel and is resistant to splashes and UV radiation, ensuring reliable performance in various outdoor conditions.
2. Consignes de sécurité
- Ensure the product is installed in a stable location to prevent tipping.
- Do not attempt to open or modify the internal components of the solar light. This may void the warranty and pose a safety risk.
- Keep the solar panel clean and free from debris to ensure optimal charging efficiency.
- While the product is splash-proof (IP44), avoid submerging it in water.
- Do not dispose of the product in general waste. Follow local regulations for electronic waste recycling.
3. Contenu du colis
Veuillez vérifier que le colis contient les éléments suivants :
- 1 x Lumisky Porto 50 Solar Garden Terminal LED Light
- Manuel de l'utilisateur (ce document)
Note: Any additional mounting hardware, if required for specific installations, may be sold separately or included depending on the retailer.
4. Configuration et installation
The Porto 50 solar terminal is designed for simple ground placement. No complex wiring is required.
- Déballer l'appareil : Carefully remove the Porto 50 light from its packaging.
- Choisissez un emplacement : Select an outdoor location that receives direct sunlight for at least 6-8 hours daily. This is crucial for the solar panel to charge the battery effectively. Avoid areas shaded by trees, buildings, or other obstructions.
- Emplacement au sol : Place the terminal directly on the ground in your desired location, such as along a garden path, driveway, or patio edge. Ensure the base is stable.
- Charge initiale: Allow the light to charge for a full day (6-8 hours of direct sunlight) before its first use to ensure optimal battery performance.
Image 1: Lumisky Porto 50 solar light installed in a garden path. This image shows the light positioned on a stone path amidst garden foliage, demonstrating a typical installation scenario.
Image 2 : Gros plan view of the Lumisky Porto 50 solar light unit. This image provides a detailed look at the light's structure, including its dark gray finish and the solar panel integrated into the top.
5. Mode d'emploi
The Lumisky Porto 50 operates automatically once installed and charged.
- Opération automatique: The integrated solar panel charges the internal battery during daylight hours. At dusk, the light automatically activates, providing illumination.
- Autonomie: After a full charge of approximately 6-8 hours in direct sunlight, the Porto 50 can provide illumination for up to 12 hours.
- Rendement lumineux : The light emits a warm white LED illumination with a luminous flux of over 250 lumens, suitable for marking paths and enhancing garden ambiance.
- Capteur de mouvement : The Porto 50 is equipped with a motion detector, which enhances its functionality by activating or brightening the light when movement is detected.
6. Entretien
Un entretien régulier garantit la longévité et les performances optimales de votre lampe solaire.
- Panneau solaire propre : Essuyez périodiquement la surface du panneau solaire avec un chiffon doux et sec.amp Utilisez un chiffon pour enlever la poussière, la saleté ou les débris. Un panneau propre garantit une absorption optimale de la lumière solaire et une efficacité de charge maximale.
- Vérifiez les obstructions : Ensure that no new foliage or objects are shading the solar panel, especially during seasonal changes.
- Remplacement de la batterie : The internal battery is designed for long-term use. If the light's performance significantly degrades over time, consult customer support for potential battery replacement options. Do not attempt to replace the battery yourself.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas la nuit. | Ensoleillement insuffisant pour la recharge. Le panneau solaire est sale ou obstrué. La batterie n'est pas complètement chargée. | Déplacez la lampe dans un endroit bénéficiant de la lumière directe du soleil pendant 6 à 8 heures par jour. Nettoyer le panneau solaire. Allow for a full day's charge before expecting full operation. |
| La lumière est faible ou ne reste allumée que pendant une courte période. | Inadequate charging due to cloudy weather or insufficient sunlight. La capacité de la batterie diminue avec le temps. | Ensure the light receives maximum direct sunlight. If the issue persists after prolonged use, the battery may be nearing the end of its lifespan. |
| Le capteur de mouvement ne détecte aucun mouvement. | Capteur obstrué ou sale. Mouvement hors de la zone de détection. | Nettoyez la lentille du capteur. Ensure movement occurs within the sensor's effective range. |
8. Spécifications
| Numéro de modèle | Porto 50 |
| Marque | Lumisky |
| Taper | Solar Garden Terminal LED Light |
| Source de lumière | DIRIGÉ |
| Couleur claire | Blanc chaud |
| Flux lumineux | > 250 lumens |
| Autonomie | Jusqu'à 12 heures (après une charge complète) |
| Temps de charge | Environ 6 à 8 heures (en plein soleil) |
| Matériel | Acier |
| Hauteur | 50 cm |
| Diamètre | 16 cm |
| Couleur | Gris |
| Indice de protection | IP44 (résistant aux éclaboussures) |
| Dossier spécial | Détecteur de mouvement |
| Résistance aux UV | Oui |
9. Garantie et assistance
Lumisky products are manufactured to high-quality standards. For warranty information or technical support, please refer to the retailer's policy or contact Lumisky customer service directly. Keep your proof of purchase for warranty claims.
Pour obtenir de l'aide supplémentaire, veuillez consulter le site officiel de Lumisky. webconsultez votre site web ou contactez votre distributeur local.
