LEDVANCE 360DEG Wall Sensor Instruction Manual

1. Introduction

Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.

2. Consignes de sécurité

Veuillez lire attentivement ces consignes de sécurité avant l'installation et l'utilisation. Le non-respect de ces consignes peut entraîner un choc électrique, un incendie ou d'autres dangers.

• Installation professionnelle : L'installation doit être effectuée par un électricien qualifié, conformément à toutes les normes électriques locales et nationales.
• Coupure de courant : Coupez toujours l'alimentation au niveau du disjoncteur avant d'installer, d'entretenir ou de nettoyer l'appareil.
• Voltage: Assurer le vol d'alimentationtage matches the device's requirements (230 Volt AC).
• Conditions environnementales : The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
• Modification: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.

3. Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'installation :

• 1x LEDVANCE 360DEG Wall Sensor device

4. caractéristiques du produit

• Stand-alone motion and light sensor for wall mounting.
• 360° detection field for comprehensive coverage.
• Optimized for energy saving.
• Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
• Zero-crossing circuit optimized for the operation of LED luminaires.
• IP55 protection type, suitable for outdoor use.
• Designed to be disassembled for separate control of internal light sources (if applicable).

5. Configuration et installation

The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

Figure 5.1 : Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

Figure 5.2 : Gros plan view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.

5.1 Emplacement de montage

• Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
• Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
• Ensure the mounting surface is stable and can support the device's weight (250 grams).

5.2 Connexion électrique

• AVERTISSEMENT: Débranchez l'alimentation avant d'effectuer toute connexion électrique.
• Connect the sensor to a 230 Volt AC power supply.
• Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
• The zero-crossing circuit is optimized for LED luminaires.

6. Mode d'emploi

The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.

Modes de fonctionnement 6.1

The sensor features three selectable operating modes:

1. Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
2. Activation by Motion: The connected light turns on when motion is detected within the 360° field.
3. Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.

Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.

6.2 Detection Settings

The sensor allows for adjustment of the light duration after detection:

• Durée d'éclairage : The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.

7. Entretien

The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.

• Nettoyage: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
• Inspection: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.

8. Dépannage

If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:

• La lumière ne s'allume pas :
  • Vérifiez si l'alimentation électrique est branchée et active.
  • Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
  • Assurez-vous que la zone de détection est dégagée de tout obstacle.
  • Ajustez les paramètres de sensibilité si disponibles.
• La lumière reste allumée en permanence :
  • Check if the operating mode is set to 'Continuous Light On'.
  • Ensure no constant motion is occurring within the detection zone.
• La lumière s'allume inopinément :
  • Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
  • Adjust the sensor's sensitivity or detection range if possible.

Si le problème persiste après avoir essayé ces solutions, contactez le service client ou un électricien qualifié.

9. Spécifications

10. Garantie et assistance

The LEDVANCE 360DEG Wall Sensor comes with a Garantie constructeur d'un an à compter de la date d'achat, couvrant les défauts de matériaux et de fabrication dans des conditions normales d'utilisation.

For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the Boutique de la marque LEDVANCE.

Veuillez conserver votre preuve d'achat à des fins de garantie.