Introduction
This manual provides instructions for the proper use and maintenance of your Lorex ACCPWR12V2A 12V 2A AC Power Supply Adapter. This adapter is designed to provide reliable power to compatible Lorex DVR systems.
The Lorex ACCPWR12V2A is an AC power supply adapter with an input range of 100-240V~50/60Hz, 0.7A max, and an output of 12.0V, 2.0A. It is specifically designed for use with various Lorex Security DVR models.
Contenu du colis
- 1 x Lorex ACCPWR12V2A 12V 2A AC Power Supply Adapter
Consignes de sécurité
- Use only with compatible Lorex DVRs as specified in this manual.
- N’exposez pas l’adaptateur à l’humidité ou à des températures extrêmes.
- Ne pas démonter ni tenter de réparer l'adaptateur.
- Assurez-vous que la prise de courant est facilement accessible et correctement mise à la terre.
- Évitez de placer des objets lourds sur le cordon d'alimentation.
Installation
Follow these steps to connect your Lorex ACCPWR12V2A power supply adapter to your compatible DVR:
- Identify the DC Input Port: Locate the DC power input port on your Lorex DVR. This port is typically labeled "DC IN" or "POWER".
- Connect the Adapter to the DVR: Insert the barrel connector of the ACCPWR12V2A adapter firmly into the DC input port on your DVR.
- Connectez-vous à une prise de courant : Plug the AC prongs of the power adapter into a standard electrical wall outlet (100-240V AC, 50/60Hz).
- Vérifiez l'alimentation : Once connected, your DVR should power on. Check for any power indicator lights on the DVR to confirm it is receiving power.
Image: The Lorex ACCPWR12V2A power adapter, showing the main unit, attached cable, and DC barrel connector, ready for connection. The AC prongs are visible on the adapter unit.
Image : Un gros plan view of the DC barrel connector, which plugs into the DVR's power input port.
Mode d'emploi
The Lorex ACCPWR12V2A power supply adapter operates automatically once connected. It converts the AC power from your wall outlet into the necessary 12V DC power for your compatible Lorex DVR. No user interaction is required for its operation beyond initial setup.
- Ensure the adapter is always connected to a stable power source.
- Do not disconnect the adapter from the DVR or power outlet while the DVR is in operation, unless performing a controlled shutdown.
Entretien
To ensure the longevity and proper functioning of your power adapter, follow these maintenance guidelines:
- Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'extérieur de l'adaptateur. N'utilisez pas de nettoyants liquides ni de solvants.
- Stockage: If storing the adapter, ensure it is kept in a cool, dry place, away from direct sunlight and extreme temperatures. Coil the cable loosely to prevent damage.
- Inspection: Periodically inspect the power cord and adapter for any signs of damage, such as cuts, fraying, or bent prongs. If damage is observed, discontinue use and replace the adapter.
- Environnement: Keep the adapter away from water, high humidity, and excessive dust.
Dépannage
If you encounter issues with your Lorex ACCPWR12V2A power adapter, refer to the following troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| L'enregistreur numérique ne s'allume pas. |
|
|
| L'adaptateur est anormalement chaud. |
|
|
If these steps do not resolve the issue, contact Lorex customer support for further assistance.
Caractéristiques
- Modèle: ACCPWR12V2A
- Saisir: 100-240V~50/60Hz, 0.7A max
- Sortir: 12.0 V, 2.0 A
- Quoitage: 24 watts
- Longueur du câble : Environ 3 pieds
- Poids de l'article : 7.4 onces
- Dimensions (Adapter Unit): Dimensions approximatives de l'emballage : 6.54 x 3.98 x 3.23 pouces.
Image: The back of the power adapter unit, displaying detailed electrical specifications and certifications.
Compatibilité
The Lorex ACCPWR12V2A power adapter is compatible with the following Lorex DVR series:
- DV700FS Series 1080p Wired HD Security DVR
- LH050 ECO Series Wireless HD Security DVR
- LHV0000 Series 720p Wired HD Security DVR
- LHV1000 Series 720p Wired HD Security DVR
- LHV2000 Series 1080p Wired HD Security DVR
- LHV2000FS Series 1080p DVR with FLIR Secure
Always verify your DVR model number against this list to ensure compatibility before use.
Informations sur la garantie
Specific warranty terms and conditions for the Lorex ACCPWR12V2A power supply adapter are provided by the manufacturer. Please refer to the official Lorex website or your product's original packaging for detailed warranty information and registration procedures.
Assistance clientèle
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Lorex ACCPWR12V2A power supply adapter, please visit the official Lorex support website or contact their customer service department. Contact information can typically be found on the Lorex websur le site ou dans la documentation originale de votre produit.
Lorex Officiel Website: www.lorex.com
