Shure SLXD14/98H Digital Wireless Microphone System User Manual

1. Introduction

The Shure SLXD14/98H Digital Wireless Microphone System provides transparent, 24-bit digital audio and reliable RF performance. This system is suitable for various applications, from conferences to live performances. It operates within the G58 Band (470-514 MHz) and offers easy setup with optional rechargeability accessories.

Image: Shure SLXD14/98H Digital Wireless Microphone System, showing the SLXD4 receiver and SLXD1 bodypack transmitter.

Produit terminéview Vidéo

2. Contenu de la boîte

Your Shure SLXD14/98H Digital Wireless Microphone System package includes the following components:

• 1 x Beta 98H/C miniature instrument microphone
• 1 x SLXD1 bodypack transmitter
• 1 x SLXD4 single-channel receiver
• Antenna and rackmount accessories
• 1 x Zippered bag
• 2 piles AA

3. Installation

3.1 Configuration du matériel

Follow these steps to connect your system hardware:

1. Connect Antennas and Power: Securely connect the antennas to the SLXD4 receiver. Then, connect the power supply to the receiver and a power outlet.
2. Connect to Sound System: Connect the receiver's audio output to your sound system (mixer, amplifier, or audio recorder) using an XLR or 1/4-inch cable.
3. Installer les piles : Open the battery compartment on the SLXD1 bodypack transmitter. Insert the two included 1.5V AA batteries, ensuring correct polarity. For optional extended use, consider the Shure SB903 Lithium-ion rechargeable battery.
4. Récepteurs multiples : If using two receivers, connect them with an Ethernet cable. For three or more receivers, use a network switch.

3.2 Configuration de la fréquence guidée

To ensure optimal performance, perform a guided frequency setup:

1. Turn on the SLXD4 receiver. Ensure all transmitters are turned OFF.
2. On the receiver, use the control knob to navigate to Frequency Setup > Guided Frequency Setup > Initialize My System.
3. Follow the on-screen prompts. The receiver will scan for the best group of channels.
4. Once a frequency is assigned, proceed to sync the transmitter.

3.3 Syncing the Transmitter and Receiver

After setting up the frequency, sync your transmitter with the receiver:

1. Turn on the SLXD1 bodypack transmitter.
2. On the SLXD4 receiver, press the Synchroniser button. The IR port will illuminate.
3. Align the IR ports on the transmitter and receiver (typically within 15 cm / 6 inches) and hold until the sync is confirmed on the receiver screen.
4. Once synced, your system is ready for use.

3.4 Adding an Additional Receiver

If you are expanding your system with more receivers, follow these steps:

1. Connect the new receiver to your network (via Ethernet cable or network switch if using three or more receivers).
2. Turn on the new receiver.
3. On the new receiver, navigate to Frequency Setup > Guided Frequency Setup > Add Receiver to My System.
4. Ensure all existing synced transmitters are ON to avoid interference during the scan.
5. Follow the on-screen prompts to scan and assign a frequency.
6. Confirm the new receiver is set to the same group number as other receivers in your system.
7. Select 'Apply' to save the settings.
8. Sync the new transmitter with the new receiver as described in Section 3.3.

4. Fonctionnement

4.1 Locking and Unlocking the Receiver

To prevent accidental changes to settings, you can lock the receiver controls:

1. On the SLXD4 receiver, use the control knob to navigate to Advanced Settings > Device Lock.
2. Push the knob to edit the setting. You can choose between:
• Lock Menu: Permet viewing menu options but prevents changes.
• Lock Menu & Power: Prevents menu changes and powering off the device.
3. Push the knob again to save your selection.
4. To unlock, return to the Verrouillage de périphérique menu et sélectionnez Ouvrir.

4.2 Activating/Disabling Auto-Lock (Handheld & Bodypack)

Transmitters can also be set to auto-lock:

1. On the handheld or bodypack transmitter, press the Menu button to navigate to the Verrouillage automatique écran.
2. Presse Entrer, alors Menu to change the setting to On or Désactivé.
3. Presse Entrer pour enregistrer le paramètre.

4.3 Setting Lock Type (Handheld & Bodypack)

You can choose the type of lock for your transmitter:

1. Sur l'émetteur, appuyez sur Menu button to navigate to the Type de serrure écran.
2. Presse Entrer, alors Menu pour choisir entre :
• Menu Only: Permet viewing menu options but prevents changes.
• Menu & Power: Prevents menu changes and powering off the device.
3. Presse Entrer pour enregistrer votre sélection.

5. Entretien

5.1 Autonomie de la batterie

The SLXD1 bodypack transmitter provides up to 8 hours of operation using two AA batteries. For enhanced monitoring and extended use, consider upgrading to the optional Shure SB903 Lithium-ion rechargeable battery. This rechargeable battery allows you to monitor battery charge status in hours and minutes, as well as battery life and health statistics directly on the device.

6. Dépannage

If you encounter issues with your Shure SLXD14/98H system, consider the following:

• Pas d'audio : Check all cable connections, ensure the transmitter is powered on and synced to the receiver, and verify the receiver's audio output is connected to your sound system.
• Interférences/Déconnexions : Perform a new Guided Frequency Setup (Section 3.2) to find a clear frequency. Ensure transmitters are not too far from the receiver and that there are no obstructions.
• Batterie faible : Replace AA batteries or recharge the SB903 Lithium-ion battery.
• Controls Locked: Refer to Section 4.1 and 4.2 to unlock the receiver or transmitter controls.

For detailed troubleshooting guides and frequency band compatibility in your area, please refer to the official Shure website.

7. Spécifications

8. Garantie et assistance

This Shure SLXD14/98H Digital Wireless Microphone System comes with a Garantie constructeur d'un an.

For technical support, warranty claims, or additional product information, please visit the official Shure website or contact Shure customer service directly.