1. Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of your Beghelli 1499L 11W Slim Emergency Lamp, Model 8106/11. This energy-efficient, battery-powered LED lamp is designed to provide reliable emergency lighting, particularly for outdoor ceiling-mounted applications. Please read this manual thoroughly before installation and use, and retain it for future reference.
Figure 1: Beghelli 1499L 11W Slim Emergency Lamp. This image shows the white rectangular lamp unit with its black mounting base, designed for discreet installation.
2. Consignes de sécurité
Respectez toujours les consignes de sécurité suivantes afin d'éviter les blessures ou d'endommager le produit :
- Sécurité électrique : Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure power is disconnected before any installation or maintenance.
- Intégrité du produit : Do not modify or disassemble the lamp. Any unauthorized modifications will void the warranty and may pose a safety risk.
- Conditions environnementales : Ce lamp is designed for outdoor use. Ensure it is installed in a location protected from extreme weather conditions beyond its IP rating (if specified, otherwise assume standard outdoor protection).
- Manipulation de la batterie : Le lamp contains a battery. Do not expose the battery to excessive heat, fire, or puncture. Dispose of batteries according to local regulations.
- Montage: Ensure the mounting surface is structurally sound and can support the weight of the lamp.
3. Configuration et installation
Suivez ces étapes pour une installation correcte :
- Déballage: Carefully remove the emergency lamp and all components from the packaging. Inspect for any signs of damage. If damaged, do not proceed with installation and contact your supplier.
- Outils requis : Gather necessary tools, which typically include a drill, screwdriver, wire strippers, and appropriate mounting hardware (not always included).
- Emplacement de montage : Select a suitable outdoor ceiling location for installation. Ensure the area is clear and provides adequate illumination coverage when the lamp is active. The lamp is designed for ceiling mounting.
- Coupure de courant : Before beginning any electrical work, ensure the main power supply to the installation area is completely disconnected at the circuit breaker.
- Montage de la base : Fixez solidement le lamp's mounting base to the chosen ceiling location using appropriate screws and anchors. Ensure the base is firmly fixed.
- Connexion électrique : Connectez le lamp's wiring to the building's electrical supply according to the wiring diagram provided with the product (if applicable) and local electrical codes. This lamp is battery-powered, but requires a constant power supply for charging and automatic operation.
- Lamp Pièce jointe: Once wiring is complete and secure, attach the main lamp unit to the mounted base. Ensure it clicks or locks into place firmly.
- Charge initiale: After installation, restore power to the circuit. The lamp will begin charging its internal battery. Allow at least 24 hours for the battery to achieve a full charge before conducting the first operational test.
4. Fonctionnement
The Beghelli 1499L 11W Slim Emergency Lamp fonctionne automatiquement :
- Mode normal : When the main power supply is active, the lamp's battery charges, and the lamp remains off (or in standby, depending on configuration).
- Mode d'urgence: En cas de panne de couranttage, le lamp will automatically switch on, utilizing its internal battery to provide emergency illumination. The lamp is designed to provide light for approximately 8 hours on a full charge.
- Fonction d'essai : Le lamp features a tactile switch, typically used for testing the battery and lamp functionality. Press and hold this switch to temporarily simulate a power outage and verify the lamp illuminates. Release the switch to return to normal operation. Perform this test monthly.
5. Entretien
Un entretien régulier garantit des performances optimales et une longue durée de vie :
- Nettoyage: Nettoyez périodiquement le lampl'extérieur de avec un doux, damp chiffon. Ne pas utiliser de nettoyants abrasifs ni de solvants. S'assurer que leamp est sec avant de rétablir le courant.
- Tests mensuels : Conduct a monthly functional test using the tactile switch to ensure the lamp activates and provides light.
- Annual Discharge Test: Annually, disconnect the main power supply to the lamp for a full discharge test. Allow the lamp to operate on battery power until it fully discharges. Reconnect power and allow 24 hours for a full recharge. This helps maintain battery health.
- Remplacement de la batterie : The internal battery has a limited lifespan. If the lamp fails to hold a charge or provides significantly reduced illumination time, the battery may need replacement. Due to the specialized nature, contact a qualified technician for battery replacement. Information on spare parts availability is not provided.
6. Dépannage
Consultez le tableau ci-dessous pour connaître les problèmes courants et leurs solutions :
| Problème | Cause possible | Solution |
|---|---|---|
| Lamp does not illuminate during power outage. |
|
|
| Lamp illuminates for a short duration only. |
|
|
| Lamp reste allumé en permanence. |
|
|
7. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Marque | Beghelli |
| Numéro de modèle | 8106/11 |
| Dimensions (L x l x H) | 21 x 11 x 30 cm |
| Poids | 570 grammes |
| Matériel | Aluminium |
| Couleur | Blanc |
| Style | Moderne |
| Type de finition | Laqué |
| Type de source lumineuse | DIRIGÉ |
| Source d'énergie | Battery Powered (with mains charging) |
| Durée de l'opération d'urgence | Environ 8 heures |
| Changer de style | Tactile (for testing) |
| Type d'installation | Montage au plafond |
| Environnement d'utilisation | De plein air |
| Efficacité énergétique | Haute efficacité énergétique |
8. Garantie et assistance
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Information regarding the availability of spare parts for this product is not explicitly provided. For technical support or service inquiries, please contact Beghelli customer service or your authorized dealer.





