Introduction
This manual provides essential information for the safe and efficient operation of your POOLEX Silverline Inverter 90 Heat Pump. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent damage to the unit or injury to yourself.
Consignes de sécurité
Always adhere to local electrical codes and regulations. Installation must be performed by a qualified professional. Disconnect power before performing any maintenance or service. Do not operate the unit if any part is damaged. Keep children and pets away from the unit during operation. Ensure proper ventilation around the heat pump.
- Vérifiez que l'alimentation électrique corresponde aux exigences de l'appareil.
- Ne pas obstruer les entrées d'air ni les conduits d'évacuation.
- Avoid direct contact with moving parts, such as the fan.
- In case of unusual noise, smell, or smoke, immediately turn off the unit and disconnect power.
Contenu du colis
Vérifiez que tous les composants énumérés ci-dessous sont présents dans votre colis :
- POOLEX Silverline Inverter Heat Pump Unit: The main heat pump unit, designed for efficient pool heating.
Image: The primary POOLEX Silverline Inverter heat pump unit in gray, featuring a large fan on the side and the 'FULL INVERTER' logo.
- Anti-Vibration Mounts: A set of four rubber mounts to reduce vibration and noise during operation.
Image: Four black U-shaped anti-vibration rubber mounts.
- PVC Connectors (Ø 50 mm, 1 ½): Two white PVC connectors for plumbing the heat pump into your pool's filtration system.
Image: Two white PVC pipe connectors with threaded ends and O-rings.
- Tuyau d'évacuation des condensats : A flexible hose for draining condensation from the unit.
Image: A coiled translucent white hose with a black elbow connector at one end, used for condensate drainage.
- Cable Remote Control Extension (10 m): A 10-meter cable to extend the reach of the remote control panel.
Image: A coiled white electrical cable with connectors at both ends, serving as a 10-meter extension for the remote control.
- Multilingual Operating Manual / Maintenance Folder: Documentation for installation, operation, and maintenance.
Image: A blue folder with the POOLEX logo, likely containing the operating manual and other documentation.
- Housse de protection : A silver protective cover for the heat pump unit.
Image: A folded silver protective cover, likely for the heat pump unit.
Installation
- Placement: Position the heat pump on a stable, level surface, ensuring adequate clearance for air circulation around the unit. Use the provided anti-vibration mounts to minimize noise and vibration.
- Connexion de plomberie : Connect the heat pump to your pool's filtration system using the supplied PVC connectors (Ø 50 mm, 1 ½). Ensure all connections are watertight. The unit is suitable for pools up to 50 m³.
- Connexion électrique : Connect the heat pump to a dedicated electrical circuit as per local regulations. This should be done by a certified electrician.
- Évacuation des condensats : Attach the condensate drain hose to the designated outlet on the unit and route it to a suitable drainage point.
- Panneau de commande à distance : The LED control panel can be moved up to 10 meters away from the unit using the extension cable for convenient access.
- Mise sous tension initiale : Une fois toutes les connexions sécurisées, mettez l'appareil sous tension.
Mode d'emploi
The POOLEX Silverline Inverter 90 Heat Pump is designed for efficient and quiet operation, featuring a Mitsubishi multi-frequency compressor and variable fan.
- Fonctionnement du panneau de commande : Use the integrated LED control panel to set the desired water temperature and operating mode. Refer to the detailed operating manual for specific button functions and menu navigation.
- Wi-Fi Connectivity (Smart Life App): The heat pump features Wi-Fi technology for control via a dedicated smartphone application.
- Download the official POOLEX or compatible Smart Life application from your device's app store.
- Follow the in-app instructions to pair your heat pump with your smartphone.
- Once connected, you can monitor and adjust settings remotely.
- Note: Some users have reported issues with Smart Life functionality. Ensure your Wi-Fi network is stable and the app is updated to the latest version. Consult the troubleshooting section or manufacturer support if issues persist.
- Performances de chauffage : The Twisted Tech Titan spiral exchanger ensures rapid temperature increase. The unit boasts a high COP (Coefficient of Performance) of 16 at 26°C/26°C, indicating high energy efficiency.
Entretien
Regular maintenance ensures the longevity and optimal performance of your heat pump.
- Nettoyage: Nettoyez périodiquement l'extérieur de l'appareil avec un chiffon doux et sec.amp chiffon. Assurez-vous que les grilles d'entrée et de sortie d'air sont exemptes de débris, de feuilles et d'autres obstructions.
- Inspection de la bobine : Annually inspect the evaporator coils for dirt buildup. If dirty, gently clean them with a soft brush or low-pressure water spray.
- Évacuation des condensats : Ensure the condensate drain hose is clear and free-flowing to prevent water accumulation.
- Hivérisation: Before the cold season, follow the winterization procedures outlined in the detailed operating manual to protect the unit from freezing temperatures. This typically involves draining water from the heat pump and plumbing lines.
- Vérification professionnelle : Consider an annual inspection by a qualified HVAC technician to ensure all components are functioning correctly.
Dépannage
Cette section aborde les problèmes courants que vous pourriez rencontrer.
| Problème | Cause possible | Solution |
|---|---|---|
| Unit not heating pool water. | Insufficient water flow; low ambient temperature; incorrect settings. | Check pool pump operation and filter cleanliness. Ensure ambient temperature is within operating range. Verify temperature settings on control panel/app. |
| L'unité ne s'allume pas. | Pas d'alimentation électrique ; disjoncteur déclenché ; défaut interne. | Check power connection and circuit breaker. If problem persists, contact qualified technician. |
| Smart Life App connectivity issues. | Unstable Wi-Fi network; incorrect pairing procedure; app version outdated. | Ensure strong Wi-Fi signal. Re-attempt pairing process as per manual. Update the Smart Life app. If issues continue, contact POOLEX support. |
| Bruit inhabituel provenant de l'appareil. | Debris in fan; loose components; anti-vibration mounts not installed correctly. | Inspect fan for obstructions (power off first). Check for loose screws. Ensure anti-vibration mounts are properly seated. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | PC-SLP090N |
| Dimensions du produit | 82.4 x 33.4 x 65.6 cm |
| Poids | 25 kilogrammes |
| Type de matériau | Titan (for heat exchanger) |
| Type de lecteur | à commande hydraulique |
| Fabricant | Étoile de la piscine |
| Volume de piscine approprié | Jusqu'à 50 m³ |
| COP (Coefficient de Performance) | 16 (at 26°C/26°C) |
Garantie et assistance
POOLEX is committed to 100% customer satisfaction. If you have any questions regarding the product, installation, operation, or require technical assistance, please visit the official POOLEX website ou contactez leur service client.
For further support, you can visit the POOLEX store on Amazon: Magasin POOLEX
