1. Introduction
Thank you for choosing the WilTec Manual Bench Tube Bender. This tool is designed for precise and efficient bending of various pipe materials. Please read this manual thoroughly before operation to ensure safe and correct use, and to achieve optimal results.
This manual provides essential information on product components, setup, operation, maintenance, and troubleshooting. Keep this manual for future reference.
2. Consignes de sécurité
- Portez toujours un équipement de protection individuelle (EPI) approprié, notamment des lunettes de sécurité et des gants, pendant l'opération.
- Ensure the tube bender is securely mounted or placed on a stable surface before use.
- Do not exceed the maximum bending capacity or pipe diameter specified for this tool.
- Inspect the tool and dies for any damage or wear before each use. Do not use if damaged.
- Keep hands and fingers clear of moving parts during the bending process.
- Store the tool and accessories in the provided case in a dry, secure place, out of reach of children.
- This tool is intended for bending soft copper, aluminum, and plastic pipes. Do not attempt to bend hardened steel or other unsuitable materials.
3. Contenu du colis
The WilTec Manual Bench Tube Bender package includes:
- 1x Manual Tube Bender Unit
- Multiple Bending Dies (for 14mm, 16mm, 17mm, 20mm, 25mm, 32mm pipes)
- 1x Robust Plastic Storage Case
4. Composants du produit
Familiarize yourself with the main components of the tube bender:
Image 4.1: Labeled components of the WilTec Manual Bench Tube Bender. Key parts include the fixing bar, pin axis, bending piece, push bar, manual lever, handle, butterfly nut, and extension spring.
- Fixing Bar: Holds the pipe securely during bending.
- Pin Axis: Connects the fixing bar to the main unit.
- Bending Piece (Die): The interchangeable part that forms the bend.
- Barre de poussée: Applies pressure to the bending piece.
- Levier manuel : Used to actuate the bending mechanism.
- Poignée: Permet une meilleure prise en main lors de l'utilisation.
- Butterfly Nut: Secures the fixing bar.
- Extension Spring: Assists in the mechanism's return.
5. Installation
The tube bender is designed for quick and easy assembly. Follow these steps to prepare the tool for use:
Image 5.1: Assembly steps for the WilTec Manual Bench Tube Bender.
- Étape 1 : Select the appropriate bending die (bending piece) for your pipe diameter. Insert the die into the main unit.
- Étape 2 : Attach the fixing bar (rail) to the main unit using the pin axes and secure it with the butterfly nuts. Ensure it is firmly in place.
- Étape 3 : Actuate the manual lever to bring the bending piece to the initial position, ready to receive the pipe.
6. Mode d'emploi
This manual tube bender allows for precise bends up to 90 degrees. It is suitable for soft copper, aluminum, and plastic pipes ranging from 14mm to 32mm in diameter.
Image 6.1: Demonstrating the 90-degree bending capability.
- Préparer le tuyau : Ensure the pipe is clean and free of debris. Mark the desired bending point on the pipe.
- Insert the Pipe: Place the pipe between the selected bending die and the fixing bar. Align the marked bending point with the center of the bending die.
- Initier le virage : Firmly grip the handle and slowly actuate the manual lever. The ratchet mechanism will engage, gradually bending the pipe.
- Monitor Bend Angle: Continuously observe the pipe's angle as you apply pressure. Stop when the desired angle is achieved (up to 90 degrees).
- Tuyau de libération : Once the bend is complete, release the pressure on the lever. Carefully remove the bent pipe from the tool.
6.1. Selecting Bending Dies
The tool comes with various bending dies to accommodate different pipe diameters. Always use the correct die for your pipe size to prevent damage to the pipe or the tool.
Image 6.2: Available bending dies with corresponding pipe diameters and bending radii.
| Diamètre du tuyau | Approximate Bending Radius |
|---|---|
| 14 mm | 95 mm |
| 16 mm | 110 mm |
| 17 mm | 120 mm |
| 20 mm | 135 mm |
| 25 mm | 170 mm |
| 32 mm | 185 mm |
7. Entretien
Regular maintenance ensures the longevity and optimal performance of your tube bender.
- Nettoyage: After each use, wipe down the tool and dies with a clean, dry cloth to remove any dust or residue.
- Lubrification: Periodically apply a light machine oil to the moving parts, such as the ratchet mechanism and pin axes, to ensure smooth operation.
- Inspection: Regularly check all components for signs of wear, damage, or loose fasteners. Tighten any loose screws or nuts. Replace worn or damaged dies immediately.
- Stockage: Store the tube bender and all accessories in its robust plastic case in a dry, cool environment to prevent rust and damage.
8. Dépannage
If you encounter issues during operation, refer to the following troubleshooting guide:
| Problème | Cause possible | Solution |
|---|---|---|
| Le tuyau se déforme ou se plie lors du cintrage. | Incorrect die size; pipe material too hard; bending too fast. | Ensure correct die for pipe diameter. Verify pipe material is suitable. Bend slowly and steadily. |
| Bending mechanism is stiff or difficult to operate. | Manque de lubrification ; saletés ou débris dans le mécanisme. | Nettoyez et lubrifiez toutes les pièces mobiles. |
| Pipe slips during bending. | Pipe not securely placed; fixing bar loose. | Ensure pipe is firmly seated. Tighten butterfly nuts on fixing bar. |
| Inconsistent bend angle. | Improper alignment; uneven pressure. | Ensure pipe is correctly aligned with the die. Apply consistent pressure on the lever. |
If the problem persists after attempting these solutions, please contact WilTec customer support.
9. Spécifications
Refer to the following technical specifications for the WilTec Manual Bench Tube Bender:
Image 9.1: Dimensions of the WilTec Manual Bench Tube Bender.
| Fonctionnalité | Détail |
|---|---|
| Fabricant | WilTec |
| Numéro de modèle | 62534 |
| Gamme de diamètre de tuyau | 14 mm à 32 mm |
| Angle de flexion maximum | 90° |
| Matériaux compatibles | Soft Copper, Aluminum, Plastic (including coated tubes) |
| Poids de l'article | 3.32 kilogrammes |
| Dimensions du colis | 44.2 x 33.6 x 11 cm |
| Pays d'origine | Chine |
10. Informations sur la garantie
WilTec products are manufactured to high-quality standards and are subject to strict quality controls. This product comes with a standard manufacturer's warranty against defects in materials and workmanship under normal use. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for any warranty claims.
For specific warranty terms and conditions, or to initiate a warranty claim, please refer to the documentation included with your purchase or visit the official WilTec website.
11. Assistance
For technical assistance, spare parts, or any questions regarding the operation or maintenance of your WilTec Manual Bench Tube Bender, please contact WilTec customer support.
- Support en ligne: Visit the official WilTec webSite regroupant les FAQ, les informations produits et les formulaires de contact.
- Assistance par e-mail : Refer to your product packaging or the WilTec website pour l'adresse e-mail du service client approprié.
- Assistance téléphonique : Contact numbers for customer service can be found on the official WilTec website.
Lorsque vous contactez l'assistance, veuillez avoir à portée de main le numéro de modèle de votre produit (62534) et une preuve d'achat.
