1. Introduction
The mooas Multi Cube Timer is a versatile device designed to assist with time management, functioning as both a digital clock and a preset timer. Its intuitive rotating design allows for quick selection of common time intervals, making it ideal for various activities such as cooking, studying, exercising, or managing short breaks.
2. Consignes de sécurité
- Pour éviter tout dommage, tenez l'appareil à l'écart de l'eau et d'une forte humidité.
- Évitez de faire tomber l'appareil ou de le soumettre à des chocs violents.
- N’essayez pas de démonter ou de réparer l’appareil vous-même. Contactez le service client en cas de problème.
- Assurez-vous que les piles sont insérées correctement en respectant les indications de polarité.
- Retirez les piles si l'appareil ne doit pas être utilisé pendant une période prolongée afin d'éviter toute fuite.
3. Contenu du colis
- mooas Multi Cube Timer (Violet, Model MT-C2)
- Manuel d'instructions
Remarque : 2 piles AAA sont nécessaires et ne sont pas incluses dans l'emballage.
4. Produit terminéview
The mooas Multi Cube Timer features a compact, cube-shaped design with an LCD display on one side and preset time intervals (5, 10, 20, 30 minutes) on its other four sides. The back panel contains control buttons for mode selection and time setting.
Image: The mooas Multi Cube Timer in Violet, showcasinson design élégant.
Image: Diagram illustrating the dimensions of the cube timer: 2.36"D x 2.36"W x 2.17"H.
Image: The back panel of the timer, showing the Timer/Clock mode switch, SET button, and arrow button for adjustments.
5. Installation
5.1 Installation de la batterie
- Repérez le compartiment à piles à l'arrière du minuteur.
- Ouvrez le couvercle du compartiment à piles.
- Insérez 2 piles AAA en veillant à respecter la polarité (+/-) indiquée à l'intérieur du compartiment.
- Fermez soigneusement le couvercle du compartiment à piles.
Image: The back of the timer showing the battery compartment and control buttons for setting the clock and switching modes.
6. Mode d'emploi
6.1 Switching Between Clock and Timer Mode
On the back of the timer, locate the switch labeled "TIMER" and "CLOCK".
- To use as a timer, slide the switch to "TIMER".
- To use as a clock, slide the switch to "CLOCK".
6.2 Réglage de l'horloge
Ensure the timer is in "CLOCK" mode.
- Press and hold the "SET" button until the hour display starts blinking.
- Use the "UP" arrow button to adjust the hour.
- Press "SET" again to move to minute setting. Use the "UP" arrow button to adjust the minutes.
- Press "SET" a third time to switch between 12/24 hour format. Use the "UP" arrow button to select.
- Press "SET" one last time to confirm and exit setting mode.
6.3 Utilisation du minuteur
Ensure the timer is in "TIMER" mode.
- To Start a Timer: Simply flip the cube so that the desired preset time (5, 10, 20, or 30 minutes) faces upwards. The timer will start automatically with a beep, and the countdown will be displayed.
- To Pause the Timer: Turn the timer so that the LCD display faces upwards. The countdown will pause.
- To Resume the Timer: Turn the timer so that the side with the time number faces upwards again. The countdown will resume from where it left off.
- Pour réinitialiser la minuterie : To reset the current countdown and start fresh with the selected time, turn the timer so the LCD screen faces downwards. Then, flip it back to the desired time face up.
Image: The mooas Multi Cube Timer showing its various preset time options (5, 10, 20, 30 minutes) on different faces.
Image: The timer displaying the current time in clock mode, indicating its dual functionality.
Image: A hand flipping the cube timer to activate a preset countdown, illustrating the simple operation.
6.4 Indicateur LED
An LED indicator on each side of the cube blinks every second to visually show how much time has passed, even without looking directly at the display.
6.5 Timer Alarm & Backlight
When the timer reaches zero:
- Le rétroéclairage s'allume pendant 10 secondes.
- An alarm will sound for 1 minute.
Video: Official product video demonstrating the mooas Multi Cube Timer's features, including its rotating functionality, clock mode, and timer settings. The video shows how to activate and pause the timer by simply flipping the cube.
7. Caractéristiques
- Pre-set Time: 5, 10, 20, 30 minutes.
- Clock & Timer: Multi-functional device for convenience and effective time management.
- Indicateur LED : Blinks each second to show elapsed time without needing to see the display.
- Facile à utiliser : Simple flip-and-turn operation to start, pause, and resume timers.
- Timer Alarm & Backlight: Clear audio alarm and illuminated display when time is up.
- Conception simple : Compact cube design, suitable for various environments.
8. Entretien
- Nettoyez l'appareil avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
- Conserver dans un endroit frais et sec lorsqu'il n'est pas utilisé.
- Évitez d'exposer l'appareil à des températures extrêmes.
9. Dépannage
- L'appareil ne s'allume pas : Vérifiez que les piles sont correctement insérées et qu'elles ne sont pas déchargées. Remplacez-les par des piles AAA neuves si nécessaire.
- Le minuteur ne démarre pas : Ensure the mode switch on the back is set to "TIMER" and the desired time face is clearly facing upwards.
- Problèmes d'affichage : Low battery power can affect display clarity. Replace batteries.
- L'alarme ne sonne pas : Check if the device is in a quiet environment or if the sound is too low. Ensure no obstructions are covering the speaker.
10. Spécifications
| Numéro de modèle | MT-C2 |
| Couleur | Violet |
| Matériel | Plastique |
| Dimensions du produit | 2.36"P x 2.36"L x 2.17"H |
| Poids de l'article | 2.43 once (69 grammes) |
| Pre-set Time Settings | 5, 10, 20, 30 minutes |
| Source d'énergie | 2 piles AAA (non incluses) |
11. Garantie et assistance
For warranty information or technical support, please refer to the product packaging or contact mooas customer service directly. Keep your purchase receipt as proof of purchase.
