MAX MXSA001 315MHz TPMS Tire Pressure Sensors for Toyota Instruction Manual

1. Introduction

This instruction manual provides essential information for the proper installation, operation, and maintenance of your MAX MXSA001 315MHz Tire Pressure Monitoring System (TPMS) sensors. These sensors are designed as direct replacements for various Toyota models, ensuring accurate tire pressure monitoring for enhanced safety and vehicle performance. Please read this manual thoroughly before installation and retain it for future reference.

2. Consignes de sécurité

Installation professionnelle recommandée : Installation of TPMS sensors requires specialized tools and knowledge. It is highly recommended that these sensors be installed by a qualified technician.
Correct Torque: Ensure valve stem nuts are tightened to the specified torque (4 Nm or 35 in-lbs) to prevent air leaks and sensor damage.
Montage des pneus : Exercise caution during tire mounting and demounting to avoid damaging the sensor.
Compatibilité: Verify that the sensors are compatible with your vehicle's make, model, and year before installation. Refer to the replacement OEM part numbers provided.
Autonomie de la batterie : TPMS sensors contain non-replaceable batteries. The typical lifespan is 5-7 years, depending on usage.

3. Contenu du colis

Chaque paquet contient:

4 x MAX MXSA001 315MHz TPMS Sensors
4 x Silver Aluminum Valve Stems (pre-attached to sensors)

Four MAX MXSA001 TPMS sensors with silver aluminum valve stems, arranged on a white background.

Figure 3.1 : Plusview of four MAX MXSA001 TPMS sensors.

4. Configuration et installation

Proper installation is crucial for the correct functioning of the TPMS. It is strongly recommended that installation be performed by a certified automotive technician.

4.1 Vérification avant l'installation

Confirm that the MXSA001 sensors are the correct replacement for your vehicle's OEM part numbers (e.g., 4260733021, 4260706011, 4260733011, 426070C020, 426070C010, 42607AD020, 4260704010).
Inspect each sensor for any visible damage before installation.

4.2 Montage du capteur

Retirez le pneu de la roue.
Carefully remove the old TPMS sensor and valve stem.
Insert the new MAX MXSA001 sensor's valve stem through the valve hole from the inside of the rim.
Secure the valve stem nut from the outside, tightening it to 4 Nm (35 pouces-livres). Ne pas trop serrer.
Ensure the sensor body is properly seated and does not interfere with the tire bead during mounting.
Mount the tire back onto the wheel, taking care not to damage the sensor.
Gonflez le pneu à la pression recommandée par le fabricant.

Gros plan view of a single MAX MXSA001 TPMS sensor, showing the black sensor body, silver valve stem, and printed specifications like 'Max.9Bar/130Psi' and '4Nm'.

Figure 4.2.1: Close-up of a single MXSA001 sensor.

Côté view of a MAX MXSA001 TPMS sensor, highlighting the angle of the valve stem attachment to the sensor body.

Figure 4.2.2 : Côté view of the sensor and valve stem.

4.3 TPMS Relearn Procedure

After installing new TPMS sensors, your vehicle's TPMS control module must be reprogrammed or

Documents connexes - MXSA001

	MAX Sensor TPMS Installation Guide & Warranty Information (GEN 5) Detailed instructions for installing MAX Sensor TPMS sensors (models MX005A GEN 5, MX005R GEN 5), including programming, mounting, inflation, and warranty details. FCC compliant.
	MAX SENSOR MX-51 TPMS Diagnostic Tool User Manual and Overview Comprehensive guide to the MAX SENSOR MX-51, a TPMS diagnostic tool for testing, programming, and relearning tire pressure monitoring systems. Includes setup, operation, and troubleshooting.
	MAX Sensor MXBLE02 TPMS Sensor Installation and Warranty Guide Comprehensive guide for installing the MAX Sensor MXBLE02 TPMS sensor, including important safety precautions, warranty information, and FCC compliance details.
	MAX Sensor TPMS Installation and Warranty Guide This guide provides instructions for installing MAX Sensor TPMS units (models MX005A, MX005R GEN 5A), covering component identification, step-by-step installation, warranty details, and FCC compliance information.
	Manuel d'utilisation de l'auto-injecteur - Assistance technique et informations sur la garantie YZHIDIANF Manuel d'utilisation officiel de l'injecteur automatique YZHIDIANF, contenant des informations détaillées sur l'assistance technique, la garantie et les coordonnées. Inclut une garantie de 2 ans, le remplacement gratuit et des programmes d'assistance.
	TST 507 Series Wireless TPMS Installation Manual Installation guide for the TST 507 Series Wireless Tire Pressure and Temperature Monitoring System (TPMS). Covers setup, sensor programming, display configuration, alerts, troubleshooting, and specifications for vehicles and trailers.

Max Sensor MXSA001