Galcon / DIG 8006 AC-6 Six-Station Indoor Irrigation Controller User Manual

1. Introduction et plusview

The Galcon/DIG 8006 AC-6 is a residential indoor irrigation controller designed for efficient management of your watering system. This controller is capable of operating up to six irrigation control valves, in addition to a master valve or pump start relay.

It features a large, easy-to-program LCD screen and four intuitive buttons for comprehensive programming. The 8006 AC-6 offers flexible scheduling options, allowing independent programming for each valve and the ability to operate two valves simultaneously. Programming can be set based on specific days of the week (Daily/Weekly) or in cyclical patterns. Irrigation durations can range from as short as 1 minute to as long as 12 hours.

The controller includes a sensor input for connecting rain sensors or soil moisture sensors, enabling water conservation by preventing irrigation in areas already wet. This sensor input can be assigned to individual valves, providing precise control. Additional features include monthly water budgeting (10% - 190% adjustment), a rain delay function of up to 30 days with auto-restart, and automatic short circuit detection that isolates faulty valves while continuing irrigation for others.

Figure 1.1 : Face avant view of the Galcon/DIG 8006 AC-6 controller with its protective cover open, revealing the LCD display, programming buttons, and valve indicators. The cover also displays icons for various functions like Irrigation Cycle, Low Battery, Percentage Setting, and Master Valve.

2. Consignes de sécurité

• Cette manette est conçue pour utilisation en intérieur uniquement. Do not install outdoors or in areas exposed to direct water spray.
• Assurez-vous que l'alimentation électrique est débranchée avant d'effectuer tout câblage ou opération de maintenance.
• All electrical connections should be made by a qualified individual and comply with local electrical codes.
• Do not attempt to open or repair the controller yourself. Refer to qualified service personnel.
• Tenir hors de portée des enfants.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• Galcon/DIG 8006 AC-6 Irrigation Controller Unit
• Power Adapter (if external) or Power Cord (if internal)
• Matériel de montage (vis, chevilles)
• Manuel de l'utilisateur (ce document)

4. Installation et configuration

4.1 Montage du contrôleur

Choose a suitable indoor location, away from direct sunlight, heat sources, and moisture. Ensure there is adequate space for wiring and access to the display.

1. Mark the desired mounting points on the wall using the controller as a template.
2. Percez des avant-trous aux emplacements marqués.
3. Insert wall anchors (if necessary) into the drilled holes.
4. Secure the controller to the wall using the provided screws.

4.2 Câblage des vannes

The 8006 AC-6 supports up to six irrigation valves and one master valve/pump start relay. Ensure all wiring is done with the power disconnected.

• Connect one wire from each irrigation valve to its corresponding terminal (1-6) on the controller.
• Connect one wire from the master valve/pump start relay to the "MV" (Master Valve) terminal.
• Connect the common wire from all valves to the "C" (Common) terminal on the controller.

4.3 Connecting a Sensor (Optional)

The controller features a sensor input for rain or soil moisture sensors. It requires a normalement ouvert (NO) rain sensor.

• Connect the two wires from your normally open rain sensor to the dedicated sensor terminals on the controller.
• Refer to your sensor's manual for specific wiring instructions.
• The sensor input can be assigned to individual valves during programming to prevent irrigation in specific areas.

4.4 Connexion d'alimentation

Once all wiring is complete, connect the controller to a standard 120V AC power outlet.

• Plug the power adapter into the controller's power input jack.
• Branchez l'adaptateur secteur dans une prise électrique mise à la terre.
• The LCD screen should illuminate, indicating power is supplied.

5. Mode d'emploi

5.1 Comprendre l'écran et les boutons

The LCD screen provides all necessary programming information. The four buttons below the screen are used for navigation and data entry.

• Écran LCD : Shows current time, day, program status, valve indicators (1-6), and programming parameters.
• Boutons:
  • Next Step (Leftmost button with square arrow): Moves to the next programming step or option.
  • Bouton moins (-) : Decreases a value or moves backward through options.
  • Bouton Plus (+) : Increases a value or moves forward through options.
  • Changing Mode (Rightmost button with right arrow): Switches between different programming modes (e.g., setting time, programming valves).

5.2 Initial Setup: Setting Current Time and Day

1. Appuyez sur le Changer de mode button until the time setting appears on the LCD.
2. Utilisez le Plus (+) et Moins (-) boutons pour régler l'heure.
3. Presse Étape suivante passer aux minutes, puis ajuster avec Plus (+) et Moins (-).
4. Presse Étape suivante to move to the day of the week, then adjust with Plus (+) et Moins (-) until the current day is selected.
5. Presse Changer de mode to exit time/day setting.

5.3 Programming Irrigation Valves

The controller allows independent programming for each of the six valves.

5.3.1 Selecting a Valve

Appuyez sur le Changer de mode button until the valve programming screen appears, typically indicated by a flashing valve number (1-6). Use the Étape suivante button to cycle through valves 1-6 and the Master Valve (MV).

5.3.2 Setting Irrigation Duration

1. With the desired valve selected, press Étape suivante to highlight the duration setting.
2. Utiliser Plus (+) et Moins (-) to set the watering duration from 1 minute to 12 hours.

5.3.3 Setting Start Times (Daily/Weekly Programming)

Up to 4 start times can be set per valve when using daily/weekly programming.

1. After setting duration, press Étape suivante to move to the first start time.
2. Adjust the hour and minutes using Plus (+) et Moins (-).
3. Presse Étape suivante to move to the next start time, or to the day selection if no more start times are needed.

5.3.4 Selecting Watering Days (Daily/Weekly Programming)

1. After setting start times, press Étape suivante to enter day selection mode.
2. The days of the week (M Tu W Th F Sa Su) will be displayed. Use Plus (+) or Moins (-) to toggle irrigation ON/OFF for each day.
3. Presse Étape suivante to confirm and move to the next valve or exit programming.

5.3.5 Cyclic Programming

Cyclic programming allows irrigation every X days (e.g., every 3 days). The cycle can be as short as every day or as long as every 30 days.

1. While in valve programming mode, cycle through the day selection options until "Cyclic" or a similar indicator appears.
2. Utiliser Plus (+) et Moins (-) to set the number of days in the cycle (e.g., "3" for every 3 days).
3. Set the start time for the cycle.

5.4 Sensor Input Configuration

The sensor input can be configured to affect specific valves.

1. Navigate to the sensor configuration menu (refer to the controller's display for specific icons or text).
2. For each valve (1-6), you can enable or disable the sensor's effect. This allows you to prevent irrigation in areas exposed to rain (e.g., lawn) while allowing it in protected areas (e.g., covered patio).

5.5 Monthly Water Budgeting

Adjust the overall irrigation duration for all active programs from 10% to 190% to account for seasonal changes without reprogramming individual valves.

1. Access the Water Budgeting menu (look for a percentage icon on the display).
2. Utiliser Plus (+) et Moins (-) pour définir le pourcentage souhaitétage. 100% is the programmed duration.

5.6 Délai de pluie

Temporarily suspend irrigation for a set period, up to 30 days.

1. Navigate to the Rain Delay function (often indicated by a rain cloud icon).
2. Utiliser Plus (+) et Moins (-) to set the number of days for the delay.
3. The controller will automatically resume the programmed schedule after the delay period.

5.7 Fonctionnement manuel

The controller supports semi-automatic and manual modes for individual valves or all valves simultaneously.

• Manual Valve Operation: Navigate to the manual mode. Select the desired valve (1-6 or MV) and set a manual run time. The valve will operate for the set duration.
• Manual All Valves: In manual mode, select the option to run all valves sequentially. Each valve will run for its programmed duration.
• To stop manual operation, press the appropriate button (often the "Changing Mode" or "Next Step" button, or a dedicated "OFF" option).

6. Entretien

6.1 Nettoyage

Wipe the controller's exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the unit.

6.2 Remplacement de la batterie (le cas échéant)

While the 8006 AC-6 is an AC-powered controller, some models may include a small backup battery (e.g., 9V or coin cell) to retain programming during power outages. If your unit has a battery compartment, replace the battery annually or when a "Low Battery" indicator appears on the display.

1. Débranchez l'alimentation du contrôleur.
2. Locate the battery compartment (usually on the back or side).
3. Remove the old battery and insert a new one, observing polarity.
4. Fermez le compartiment et rétablissez l'alimentation.

7. Dépannage

8. Spécifications

• Modèle: Galcon/DIG 8006 AC-6
• Stations: 6 (plus Master Valve/Pump Start)
• Puissance d'entrée : 120 V c.a.
• Type d'affichage : Écran LCD
• Options de programmation : Daily/Weekly, Cyclic
• Heures de début: Up to 4 per valve (Daily/Weekly)
• Durée de l'irrigation : 1 minute à 12 heures
• Cyclic Interval: Every day to every 30 days
• Entrée capteur: Yes (for Normally Open sensors like rain or soil moisture)
• Gestion de l'eau : 10% - 190% adjustment
• Délai de pluie: Jusqu'à 30 jours
• Détection de défaut : Automatic short circuit detection
• Température de fonctionnement : 68 degrés Fahrenheit
• Code à barres : 077985211233
• Fabricant: galcon

9. Informations sur la garantie

For detailed warranty information, please refer to the warranty card included with your product or visit the official Galcon webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.

10. Assistance

If you encounter any issues or have questions regarding the Galcon/DIG 8006 AC-6 controller that are not covered in this manual, please contact Galcon or DIG customer support.

• Ressources en ligne : Visit the official Galcon or DIG Corporation website for FAQs, updated manuals, and support contact information. A user review mentionné digcorp.com for technical details and full manual.
• Service client: Veuillez vous référer aux coordonnées fournies sur l'emballage du produit ou sur le site du fabricant. website.