HOBBYWING XR10 PRO-1S (1S HD) Electronic Speed Controller User Manual

1. Introduction

Thank you for choosing the HOBBYWING XR10 PRO-1S (1S HD) Electronic Speed Controller (ESC). This high-performance ESC is designed for 1/12 brushless sensored system stock and modified racing applications. Please read this manual thoroughly before use to ensure proper operation and maximize the lifespan of your product.

2. Précautions de sécurité

Operating high-power systems for RC models can be dangerous. Always exercise extreme caution and adhere to the following safety guidelines:

• Débranchez toujours la batterie du contrôleur de vitesse électronique (ESC) lorsqu'il n'est pas utilisé.
• Assurez-vous que toutes les connexions sont bien fixées et correctement isolées afin d'éviter les courts-circuits.
• Never operate the ESC in wet conditions or allow it to come into contact with water.
• Keep the ESC away from heat sources and direct sunlight.
• Always use appropriate battery types and voltages as specified for this ESC.
• Les enfants ne doivent utiliser ce produit que sous la surveillance directe d'un adulte.
• Do not modify the ESC or its components. Unauthorized modifications can lead to malfunction and void the warranty.
• Assurez une ventilation adéquate autour du contrôleur de vitesse électronique (ESC) pendant son fonctionnement afin d'éviter toute surchauffe.

3. caractéristiques du produit

The HOBBYWING XR10 PRO-1S (1S HD) ESC incorporates advanced technology for superior performance:

• Redesigned Architecture: Features a new architecture platform, resulting in a 40% smaller volume and 24% lighter weight compared to the previous generation.
• Premium MOSFETs: Equipped with high-quality Toshiba MOSFETs for enhanced efficiency and reliability.
• Super BEC: Internal BEC with booster circuitry provides up to 6A/6V output, capable of powering various servos without an additional receiver battery.
• Built-in Electronic Switch: Offers a lifespan of over 50,000 on/off cycles, with a dust-proof and shock-resistant design.
• Integrated Capacitor Module: Saves space and weight, simplifying wiring for a neat setup.
• PWM Frequency Tuning: Allows for precise throttle and brake control, crucial for competitive racing, especially in the Stock class.
• Separate Programming/Fan Port: A dedicated PRG/FAN port enables connection of an external cooling fan for maximum performance or an LCD program box/WiFi module for ESC programming.

4. Configuration et installation

Proper installation is critical for optimal performance and safety. Follow these steps carefully:

4.1 Identification des composants

Familiarize yourself with the ESC components:

Figure 1 : HOBBYWING XR10 PRO-1S (1S HD) ESC. This image displays the top view of the electronic speed controller, highlighting its compact design and heat sink. The main power terminals and sensor port are visible.

Figure 2 : HOBBYWING XR10 PRO-1S (1S HD) ESC with cooling fan installed. This image shows the ESC with an optional cooling fan attached to the heat sink, demonstrating how to enhance thermal management for demanding applications.

4.2 Connexions de câblage

• Connexion du moteur: Connect the three motor wires (A, B, C) from the ESC to the corresponding motor phases. For sensored motors, ensure the sensor cable is also connected between the ESC and the motor.
• Connexion de la batterie : Connect the battery's positive (+) and negative (-) terminals to the corresponding terminals on the ESC. Ensure correct polarity to prevent damage.
• Connexion du récepteur : Branchez le câble d'accélérateur du contrôleur de vitesse électronique (ESC) sur le canal d'accélérateur (généralement le canal 2) de votre récepteur.
• Cooling Fan (Optional): If using an external cooling fan, connect it to the dedicated PRG/FAN port on the ESC.

4.3 Montage du contrôleur

Securely mount the ESC in your vehicle using double-sided tape or screws. Ensure it is positioned to allow adequate airflow for cooling and is protected from impacts.

5. Mode d'emploi

Before operating your vehicle, perform the following steps:

5.1 Calibrage de la plage d'accélération

Calibrating the throttle range ensures proper communication between your transmitter and the ESC:

1. Allumez votre émetteur et réglez le trim des gaz au neutre.
2. Connect the battery to the ESC while holding the SET button on the ESC. Release the SET button when the LED starts flashing.
3. Push the throttle stick to the full throttle position and press the SET button.
4. Push the throttle stick to the full brake/reverse position and press the SET button.
5. Release the throttle stick to the neutral position and press the SET button. The ESC is now calibrated.

5.2 Programming the ESC

The ESC can be programmed using an LCD program box or a WiFi module connected to the PRG/FAN port. Refer to the specific programming device's manual for detailed instructions on adjusting parameters such as running mode, drag brake, initial brake force, punch, and PWM frequency.

6. Entretien

Regular maintenance helps prolong the life and performance of your ESC:

• Nettoyage: Periodically clean the ESC and its cooling fan (if installed) to remove dirt, dust, and debris. Use a soft brush or compressed air.
• Inspection: Regularly inspect all wires and connectors for signs of wear, damage, or loose connections.
• Stockage: Conservez le contrôleur de vitesse électronique (ESC) dans un endroit sec et frais, à l'abri de la lumière directe du soleil et des températures extrêmes.
• Mises à jour du micrologiciel : Vérifiez le HOBBYWING website for any available firmware updates for your ESC model.

7. Dépannage

Si vous rencontrez des problèmes avec votre ESC, consultez les problèmes et solutions courants suivants :

• Pas d'alimentation : Check battery connection, ensure battery is charged, and verify the electronic switch is engaged.
• Moteur ne répondant pas : Re-calibrate the throttle range. Check motor and sensor wire connections. Ensure the motor is not seized.
• Surchauffe: Ensure adequate ventilation. Check for proper gear ratio. Consider installing an external cooling fan if not already in use. Reduce load or adjust ESC settings.
• Comportement erratique : Check for radio interference. Ensure all connections are secure. Re-calibrate the throttle.
• LED Error Codes: Consult the detailed HOBBYWING manual (usually available online) for specific LED flash patterns and their corresponding error meanings.

8. Spécifications

9. Garantie et assistance

This product is covered by the official HOBBYWING manufacturer warranty. Please note that stores outside of North America (e.g., Hong Kong, Chinese stores) are not authorized HOBBYWING dealers in North America, and items purchased from them may not be covered under warranty.

HOBBYWING North America assumes no liability for damages, losses, or costs resulting from the incorrect use, installation, application, or maintenance of our products. Any claims arising from operating failures or malfunctions will be denied if not related to manufacturing defects.

For further information or support, please contact HOBBYWING North America directly through their official online store, HOBBYWINGDirect.com.