Produit terminéview
The Greenlite LED PAR38 Motion Sensor Flood Light Bulb is designed for both indoor and outdoor use, providing efficient and bright illumination with integrated motion sensing capabilities. This 13W LED bulb is equivalent to a 100W incandescent bulb, offering 1050 lumens of 3000K Soft White light. It features an E26 medium base and is Energy Star certified, ensuring energy efficiency.
Image: The Greenlite LED PAR38 Motion Sensor Flood Light Bulb, showcasing its PAR38 shape and E26 medium base.
Image: Product packaging highlighting key features such as motion sensor, 13W PAR38, 100W equivalent, 1050 lumens, and Energy Star certification.
Consignes de sécurité
- AVERTISSEMENT: Risque de choc electrique. Débranchez l'alimentation avant l'installation.
- Do not use with dimmers. This bulb is non-dimmable.
- Convient aux endroits humides.
- Assurez-vous que le luminaire est adapté à la puissance de l'ampoule.tage et taille.
- Ne démontez pas l'ampoule.
- Cet appareil n'est pas destiné à être utilisé avec des issues de secours.
Configuration et installation
- Éteindre: Before replacing an existing bulb or installing a new one, ensure the power to the light fixture is turned off at the circuit breaker or wall switch.
- Retirer l'ancienne ampoule : Dévissez soigneusement l'ancienne ampoule du luminaire.
- Installer une nouvelle ampoule : Screw the Greenlite LED PAR38 Motion Sensor Flood Light Bulb into the E26 medium base socket. Ensure it is securely tightened but do not overtighten.
- Mise sous tension : Restore power to the fixture. The bulb will illuminate briefly as it initializes.
Remarque importante : The motion sensor requires a brief warm-up period after power is applied. During this time, the bulb may remain on continuously before the motion sensing function becomes active. This can take up to an hour in some cases, as noted by user experiences.
Image: Dimensional drawing of the bulb, showing a width of 4.7 inches (119mm) and a height of 5.2 inches (132mm). Ensure your fixture can accommodate these dimensions.
Mode d'emploi
This Greenlite LED PAR38 bulb features an integrated motion sensor. It is designed to automatically turn on when motion is detected within its sensing range and turn off after a period of no motion. The bulb operates based on ambient light levels, typically activating only in low-light conditions (e.g., dusk to dawn) when motion is present.
- Opération automatique: Once installed and powered, the bulb will automatically detect motion and ambient light.
- Détection de mouvement : Le capteur détecte les mouvements dans son champ de vision. view. Factors like distance, object size, and movement speed can affect detection.
- Arrêt automatique: After motion ceases, the bulb will remain lit for a set period (typically a few minutes, non-adjustable) before turning off.
- Sensibilité à la lumière : The bulb is designed to operate in dark conditions. It will generally not activate during daylight hours, even if motion is detected.
Image : Un example of the flood light bulbs installed in an outdoor setting, illuminating a driveway and garage area at night, demonstrating their effective coverage.
Entretien
- Nettoyage: Ensure the bulb is cool and power is off before cleaning. Wipe the bulb and sensor lens gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Inspection: Vérifiez régulièrement l'ampoule et le support pour déceler tout signe de dommage ou de connexion desserrée.
- Aucune pièce réparable par l'utilisateur : Cette ampoule ne contient aucune pièce réparable par l'utilisateur. Ne tentez pas de l'ouvrir ni de la réparer.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'ampoule ne s'allume pas. | No power; Bulb not screwed in properly; Sensor blocked; Ambient light too high. | Check power supply and circuit breaker. Ensure bulb is securely tightened. Clear any obstructions from the sensor. Test in darker conditions. |
| L'ampoule reste allumée en permanence. | Initial warm-up period; Constant motion detected; Sensor malfunction; Ambient light too low (sensor thinks it's always dark). | Allow up to an hour for initial warm-up. Ensure no continuous motion is in the sensor's field. Check for external light sources interfering with the sensor. If problem persists, bulb may be faulty. |
| L'ampoule s'allume et s'éteint de façon aléatoire. | Interference from moving objects (trees, traffic); Sensor sensitivity issues. | Adjust fixture angle if possible to minimize unwanted triggers. Ensure sensor is clean. |
| La lumière est trop faible ou trop forte. | Incorrect bulb for application; Not designed for dimming. | This bulb is non-dimmable. Ensure it meets your brightness requirements (1050 lumens). |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | Greenlite |
| Numéro de modèle | 48145 |
| Type de lumière | DIRIGÉ |
| Forme de l'ampoule Taille | PAR38 |
| Quoitage | 13 watts |
| Wat équivalenttage | 100 watts |
| Luminosité | 1050 lumens |
| Température de couleur | 3000 Kelvin (blanc doux) |
| Culot de l'ampoule | Culot moyen E26 |
| Voltage | 120 volts |
| Utilisation intérieure/extérieure | Intérieur, extérieur |
| Dossier spécial | Motion Sensor, Shatter Resistant |
| Certification | Energy Star, UL Listed, RoHS Compliant |
| Dimensions du produit | 4.73 po L x 5.15 po H (119 mm x 132 mm) |
| Poids de l'article | 6.1 onces |
Image: The bulb displaying its motion sensor icon, Energy Star, UL Listed, and RoHS compliance logos, indicating its safety and efficiency certifications.
Garantie et assistance
Specific warranty details for the Greenlite LED PAR38 Motion Sensor Flood Light Bulb (Model 48145) are not provided in this manual. For warranty information, technical support, or customer service inquiries, please refer to the manufacturer's official website or contact Greenlite customer support directly.
Fabricant: Greenlite
Website: www.greenlite.ca
