Introduction
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your LogiLink BP0074 Dual Monitor Desk Mount. Please read this manual thoroughly before beginning installation to ensure correct setup and to prevent damage to the product or injury. Keep this manual for future reference.
Consignes de sécurité
- Avant l'assemblage, assurez-vous que tous les composants sont présents et en bon état. Ne pas utiliser si des pièces sont manquantes ou défectueuses.
- Verify that the desk surface can support the combined weight of the mount and two monitors.
- Do not exceed the maximum load capacity of 6 kg (13.22 lbs) per arm.
- Use appropriate tools and follow all steps carefully. Improper installation may result in product failure or personal injury.
- Tenir les enfants et les animaux domestiques éloignés pendant l’installation.
Contenu du colis
Please check the package to ensure all items listed below are included:
- 1 x Dual Monitor Desk Mount Assembly
- 2 x VESA Monitor Plates
- 1 x support de bureauamp Assemblée
- 1 x Hardware Kit (screws, washers, spacers, Allen keys)
- 1 x Manuel d'instructions
Image: All components of the LogiLink BP0074 Dual Monitor Desk Mount.
Instructions d'installation
Step 1: Attach Desk Clamp au bureau
Positionnez le bureau clamp assembly on the edge of your desk. Tighten the clamp screws securely until the mount is stable. Ensure the clamp is flush with the desk surface for maximum stability.
Image: Close-up of the desk clamp mechanism securely attached to a desk.
Step 2: Assemble Monitor Arms
Slide the monitor arms onto the main pole of the desk clamp assembly. Adjust their height to your desired position and secure them using the provided locking mechanisms. Ensure both arms are at a similar height for ergonomic viewing.
Étape 3 : Fixez les plaques VESA aux moniteurs
Align the VESA monitor plates with the mounting holes on the back of your monitors. Use the appropriate screws, washers, and spacers from the hardware kit to secure the plates to each monitor. Ensure the screws are tightened firmly but do not overtighten.
Image: VESA plate attached to the back of a monitor.
Étape 4 : Fixer les écrans aux bras
Carefully slide the monitors (with VESA plates attached) onto the ends of the monitor arms. Secure them in place using the quick-release or locking mechanisms on the arms. Ensure both monitors are firmly attached before releasinles g.
Image: Two monitors mounted on the LogiLink BP0074 desk mount.
Mode d'emploi
Réglage de la position du moniteur
The LogiLink BP0074 mount offers full motion capabilities:
- Inclinaison: Adjust the monitor vertically (up/down) to reduce glare and optimize viewangles d'inclinaison.
- Pivot: Rotate the monitor horizontally (left/right) to share your screen or change viewdirection.
- Rotation: Faites pivoter le moniteur de 360 degrés pour basculer entre l'orientation paysage et portrait.
Loosen the adjustment screws slightly with the provided Allen key before making adjustments, then tighten them once the desired position is achieved.
Image: Demonstrating the flexible positioning of monitors on the mount.
Gestion des câbles
Utilize the integrated cable management clips on the monitor arms to route and organize your cables. This helps maintain a tidy workspace and prevents cable damage.
Image: Cable management clips on the monitor arm.
Image: Detail of cables routed through the clips for organization.
Entretien
Regular maintenance ensures the longevity and safe operation of your monitor mount:
- Nettoyage: Essuyez le support avec un chiffon doux et sec.amp Chiffon. Évitez les nettoyants abrasifs ou les solvants.
- Vérifier l'étanchéité : Periodically check all screws and bolts, especially the desk clamp and VESA plate attachments, to ensure they remain tight. Retighten if necessary.
- Lubrification: No lubrication is typically required for this type of mount.
Dépannage
En cas de problème, veuillez consulter la liste des problèmes courants et leurs solutions ci-dessous :
| Problème | Cause possible | Solution |
|---|---|---|
| Monitor is unstable or sags | Screws are loose; monitor weight exceeds capacity | Tighten all connection screws. Verify monitor weight is within 6 kg per arm. |
| Difficulty adjusting monitor position | Adjustment screws are too tight | Slightly loosen the relevant adjustment screws with the Allen key. |
| Mount slides on desk | Bureau clamp is not tight enough | Assurez-vous que le bureau est clamp is fully tightened and flush against the desk surface. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | BP0074 |
| Taille d'écran prise en charge | 13 - 26 inches (per monitor) |
| Nombre de moniteurs | 2 |
| Capacité de charge maximale | 6 kg (13.22 lbs) per arm |
| Compatibilité VESA | 75x75mm, 100x100mm |
| Gamme de mouvement | Full Motion (Tilt, Swivel, Rotation) |
| Matériel | Métal |
| Dimensions du produit (L x l x H) | 55.3 x 79.2 x 11.6 cm (overall package/product dimensions) |
| Poids de l'article | 4.1 kg |
| Longueur du bras | Each 358 mm |
Image: Technical drawing showing key dimensions and VESA patterns.
Garantie et assistance
LogiLink products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official LogiLink webVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
