1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.
2. Consignes de sécurité
- Lisez attentivement toutes les instructions avant l'installation et l'utilisation.
- Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
- Veillez à installer l'appareil dans un endroit stable afin d'éviter toute chute accidentelle.
- Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
- Gardez l’appareil hors de portée des enfants.
3. Contenu du colis
Vérifiez que tous les éléments sont présents dans le colis :
- 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
- 1x support de montage
- 1x Set of Screws and Wall Plugs
- 1x Battery (Alkaline)
- 1x Guide de démarrage rapide (ce manuel)
4. Produit terminéview
The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.
Figure 1 : Devant view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.
Composants clés :
- Lentille PIR : Detects infrared radiation from moving bodies.
- Indicateur LED : Provides status feedback (e.g., detection, low battery).
- Compartiment à piles : Abrite la source d'énergie.
- Points de montage : For secure installation on a wall.
- Tampeuh Commutateur : Triggers an alarm if the sensor cover is opened.
5. Installation
5.1. Installation de la batterie
- Open the sensor's front cover by gently prying it open from the bottom notch.
- Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
- Close the front cover, ensuring it clicks securely into place.
5.2. Montage du capteur
The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.
- Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
- Utilisez le support de montage comme modèle pour marquer les positions des vis sur le mur.
- Percez des trous aux emplacements marqués et insérez les chevilles.
- Fixez le support de montage au mur à l'aide des vis fournies.
- Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.
5.3. Pairing with a Security System
Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:
- Putting your security system into "pairing" or "enrollment" mode.
- Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
- Confirming successful pairing through the system's interface or LED indicators.
6. Fonctionnement du capteur
6.1. Detection Principle
The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.
6.2. État de l'indicateur LED
- Flash éclair : Indique une détection de mouvement.
- Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
- Pas de lumière : Normal standby mode, or battery is completely depleted.
6.3. Detection Range and Coverage
The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.
7. Entretien
7.1. Nettoyage
Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.
7.2. Remplacement de la batterie
When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.
7.3. Contrôles réguliers
Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.
8. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Le capteur ne détecte aucun mouvement. |
|
|
| Fausses alertes. |
|
|
| LED indicator flashing continuously. | Batterie faible. | Remplacez la batterie. |
| Sensor not communicating with the security system. |
|
|
9. Spécifications
- Marque: Intelbras
- Modèle: IVP2000SF
- Source d'alimentation : Alimenté par batterie
- Type de batterie : Alcalin
- Type de montage : Support mural
- Appareils compatibles : Intelbras security systems and smart home hubs
- Dimensions du produit : Environ 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 pouces)
- Méthode de détection : Infrarouge passif (PIR)
- Portée de détection : Jusqu'à 12 mètres (39 pieds)
- Angle de détection : Environ 90 degrés
- Environnement d'exploitation : Utilisation en intérieur uniquement
10. Informations sur la garantie
Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webConsultez leur site web ou contactez leur service client. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
11. Assistance
If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:
- Website: Visitez le site officiel d'Intelbras webSite regroupant les ressources d'assistance, la FAQ et les informations de contact.
- Téléphone: Refer to the contact section on the Intelbras website répertoriant les numéros d'assistance locaux.
