Mooas MT-C1

mooas Cube Timer (Violet) Instruction Manual

Model: MT-C1

Introduction

The mooas Cube Timer is a simple and intuitive gravity-sensor timer designed for various time management needs. Its cube design allows for quick and easy activation of pre-set timers by simply flipping the cube to the desired time face. This manual provides essential information for setting up, operating, and maintaining your mooas Cube Timer.

Violet mooas Cube Timer on a white surface

Image: The violet mooas Cube Timer, showing its compact design.

Installation

1. Installation de la batterie

The mooas Cube Timer requires 2 AAA batteries (not included). To install:

  1. Locate the battery compartment on the bottom of the timer.
  2. Ouvrez le couvercle du compartiment à piles.
  3. Insérez 2 piles AAA en veillant à respecter la polarité (+/-).
  4. Fermez soigneusement le couvercle du compartiment à piles.
Close-up of the yellow mooas Cube Timer showing the battery compartment and control switches

Image: Underside of the cube timer showing the battery compartment and alarm volume switch.

2. Réglage du volume de l'alarme

The alarm volume can be adjusted using the switch located on the bottom of the timer. You can select between:

Mode d'emploi

1. Starting a Timer

The mooas Cube Timer is designed for ease of use. To start a timer:

  1. Ensure the timer is powered on (HI or LO volume selected).
  2. Simply turn the cube so that the side with your desired pre-set time (e.g., 5 min, 10 min, 20 min, 30 min) faces upwards.
  3. The timer will immediately begin counting down. A red light will blink to indicate the timer is active.
Illustration showing how to use the cube timer by flipping it to the desired time

Image: Visual guide on how to activate the timer by placing the desired time face up.

2. Pre-set Times (Violet Model)

The Violet mooas Cube Timer features the following pre-set time options:

Other color variants of the mooas Cube Timer may offer different time sets.

Multiple mooas Cube Timers in different colors, each showing different time settings

Image: Various cube timers demonstrating different time configurations available across models.

3. Affichage numérique

A small digital display on the side of the timer shows the remaining time. This display is always oriented correctly for viewing, regardless of which side is facing up.

4. Stopping the Timer

When the timer reaches zero, the alarm will sound (if not set to OFF). To stop the alarm and reset the timer, simply turn the cube so that the side with the LCD screen or the side without any numbers faces upwards.

Caractéristiques

Entretien

Dépannage

ProblèmeCause possibleSolution
Timer makes a rattling sound.Internal weight for gravity sensing.This is normal and not a defect. The internal weight is necessary for proper functioning.
Timer does not start or functions inconsistently.Low batteries, incorrect orientation, or internal mechanism issue.
  • Remplacez les piles par des piles AAA neuves.
  • Ensure the desired time face is placed firmly and correctly upwards.
  • To "reboot" the timer, turn it so the blank side (or LCD side) is up, wait for a beep, then turn it to the desired time.
Red light is distracting.Préférence personnelle.The red light indicates the timer is active. If distracting, consider placing the timer in a position where the light is not directly visible, or covering the light with a small piece of opaque tape.

Caractéristiques

Dimensions of the mooas Cube Timer, showing 2.6 inches on each side

Image: Diagram illustrating the dimensions of the mooas Cube Timer.

Garantie et assistance

For warranty information or product support, please refer to the packaging or contact mooas customer service directly. Keep your purchase receipt for warranty claims.

Documents connexes - MT-C1

Préview Manuel d'utilisation et instructions du minuteur multi-cubes Mooas MT-C2
Manuel d'utilisation détaillé du minuteur multicube Mooas (MT-C2). Apprenez à régler l'horloge, à utiliser les fonctions du minuteur, à comprendre ses caractéristiques et à respecter les consignes de sécurité. Caractéristiques techniques incluses.
Préview Manuel d'utilisation de l'horloge et minuterie multi-hexagonale Mooas MT-H7X620
Manuel d'utilisation du minuteur à horloge hexagonale multiple Mooas (modèle MT-H7X620), détaillant les caractéristiques, le fonctionnement, les avertissements de sécurité et le dépannage de ce minuteur numérique hexagonal.
Préview Manuel d'utilisation du minuteur de cuisson et réveil Mooas TC2
Manuel d'utilisation complet du minuteur de cuisine et réveil Mooas TC2. Découvrez ses fonctionnalités, comment utiliser les modes compte à rebours et chronomètre, régler les alarmes, remplacer les piles, et prenez connaissance des spécifications et des précautions d'emploi. Inclut également des informations sur le dépannage et la garantie.
Préview Manuel d'utilisation du minuteur multi-hexagonal Mooas 2e génération
Manuel d'utilisation du minuteur d'horloge multi-hexagonale Mooas 2e génération, détaillant ses fonctionnalités, son fonctionnement et ses spécifications pour divers besoins de gestion du temps.
Préview Mooas Mini Automatic Multi Flip Clock MT-CF1 User Manual
Official user manual for the Mooas Mini Automatic Multi Flip Clock (Model MT-CF1). Learn how to set time, alarm, and use its features. Includes specifications, components, and precautions.
Préview Manuel d'utilisation de l'horloge miroir numérique à LED mooas
Manuel d'utilisation de l'horloge miroir numérique LED mooas, détaillant les fonctionnalités, le mode d'emploi, les réglages de l'alarme, l'affichage de la température et les précautions d'emploi. Comprend les spécifications du produit et des instructions d'utilisation.