Robertshaw IMV708

Robertshaw IMV708 W10408179 Refrigerator Water Valve Instruction Manual

Model: IMV708 | Brand: Robertshaw

1. Produit terminéview

The Robertshaw IMV708 W10408179 Refrigerator Water Valve is a replacement component designed to regulate the flow of water to your refrigerator's ice maker and water dispenser. This valve ensures a consistent and controlled water supply for both functions.

Robertshaw IMV708 W10408179 Refrigerator Water Valve

Image: Robertshaw IMV708 W10408179 Refrigerator Water Valve, showing its inlet and outlet connections.

Compatibilité

This water valve is compatible with various refrigerator brands, including but not limited to: Tourbillon, KitchenAid, Kenmore, Peuttag, Amana, Corde, Crosley, IKEA, et Anglais.

It serves as a direct replacement for the following part numbers: 1938614, 2186486, 2188622, 2188708, 2188746, 2205762, 2255457, 2304757, 2304833, 2315534, 4389177, AP5263471, W10408179, W10408179VP, PS3497634.

Tarif Electrique

Dual Electrical Rating: 120V AC, 50/60 Hz, 35W | 120V AC, 50/60 Hz, 20W.

2. Consignes de sécurité

  • Always unplug the refrigerator from the power outlet before attempting any repairs or maintenance.
  • Turn off the main water supply to the refrigerator before disconnecting any water lines to prevent flooding.
  • Portez un équipement de protection individuelle approprié, tel que des gants et des lunettes de sécurité.
  • En cas de doute sur une étape quelconque, consultez un technicien d'électroménager qualifié.
  • Have a towel or absorbent cloth ready to catch any residual water when disconnecting lines.

3. Configuration et installation

Replacing the refrigerator water valve is a straightforward process that can typically be completed in about 10 minutes. Follow these steps carefully:

Outils requis :

  • Half-inch wrench
  • Quarter-inch nut driver
  • Tournevis à tête plate
  • Towel or absorbent cloth

Étapes d'installation :

  1. Préparer le réfrigérateur : Carefully pull the refrigerator away from the wall to access its rear. Unplug the refrigerator from the electrical outlet and turn off the main water supply valve to the refrigerator.
  2. Accédez à la vanne : Locate the rear access panel at the bottom of the refrigerator. Use a nut driver or screwdriver to remove the bolts or screws securing this panel, then carefully remove the panel.
  3. Débrancher l'alimentation en eau : Identify the existing water inlet valve. Use a half-inch wrench to disconnect the water supply copper tubing from the valve. Be prepared for a small amount of residual water.
  4. Retirer l'ancienne vanne : Use a nut driver to remove the screws that secure the old water valve to the refrigerator frame. Carefully disconnect the two wire connectors and the water line hoses from the old valve. Note their positions to ensure correct reassembly.
  5. Installer une nouvelle vanne : Position the new Robertshaw IMV708 W10408179 water valve in place. Reconnect the wire connectors and water line hoses to their corresponding ports on the new valve. Ensure all connections are firm and secure.
  6. Sécuriser et tester : Reattach the valve to the refrigerator frame with the screws. Reconnect the water supply copper tubing. Turn on the main water supply and carefully check all connections for any leaks. Once confirmed leak-free, plug the refrigerator back into the electrical outlet.
  7. Placement final : Replace the rear access panel and push the refrigerator back into its original position.

Guide vidéo d'installation :

Video: A detailed guide on how to replace the IMV708 W10408179 Refrigerator Water Valve for Whirlpool and compatible models. This video demonstrates the steps for removal and installation of the water valve.

4. Mode d'emploi

The Robertshaw IMV708 W10408179 water valve is an automatic component. It functions under the control of your refrigerator's internal systems. When the ice maker calls for water or the water dispenser lever is pressed, the valve opens to allow water to flow. It then closes automatically once the required amount of water has been dispensed or the ice maker cycle is complete.

5. Entretien

  • Inspection régulière : Periodically inspect the water valve and all connected water lines for any signs of leaks, cracks, or corrosion. Early detection can prevent significant water damage.
  • Filtre à eau : If your refrigerator has a water filter, ensure it is replaced according to the refrigerator manufacturer's recommendations. A clogged filter can reduce water flow and put undue strain on the water valve.
  • Propreté: Keep the area around the water valve and the rear of the refrigerator clean and free of dust and debris to ensure proper ventilation and operation.

6. Dépannage

No Water to Ice Maker or Dispenser:

  • Vérifier l'approvisionnement en eau : Ensure the main water supply valve to the refrigerator is fully open.
  • Connexion électrique : Verify the refrigerator is plugged in and receiving power.
  • Kinked Water Line: Inspect the water lines behind the refrigerator for any kinks or blockages that might restrict water flow.
  • Clogged Water Filter: A clogged water filter can severely restrict water flow. Replace the water filter if it's due for replacement.
  • Faulty Valve: If the valve is leaking or not activating, it may need replacement.

Fuites d'eau :

  • Action immédiate : Immediately turn off the water supply to the refrigerator and unplug it.
  • Inspecter les connexions : Check all connections to the water valve and hoses for tightness. Tighten any loose fittings.
  • Damaged Valve/Hose: If the leak originates from the valve body itself or a damaged hose, the component will need to be replaced.

Slow Water Dispensing:

  • Filtre à eau : A partially clogged water filter is a common cause. Replace the filter.
  • Faible pression d'eau : Verify that your household water pressure is adequate.

7. Spécifications

FonctionnalitéSpécification
MarqueRobertshaw
Numéro de modèleIMV708
Numéro de pièceIMV708
MatérielMétal
Finition extérieureChrome
Type de connexion d'entréeFileté
Type de connexion de sortieConnecteur G
Nombre de ports3
Taille de connexion de sortie0.25 pouces
Spécification satisfaiteUL
Poids de l'article9.6 onces
Dimensions du colis8.19 x 4.84 x 3.43 pouces
Piles incluses ?Non
Des piles sont-elles nécessaires ?Non
Code UPC191175006031

8. Informations sur la garantie

Warranty information for this specific Robertshaw IMV708 W10408179 water valve is not provided in the product details. For detailed warranty terms and conditions, please refer to the manufacturer's official website or contact Robertshaw customer service directly.

9. Assistance

For further assistance, technical support, or inquiries regarding the Robertshaw IMV708 W10408179 Refrigerator Water Valve, please contact Robertshaw customer service through their official channels. You may also consult a qualified appliance technician for professional installation or diagnosis.

Documents connexes - IMV708

Préview Robertshaw 720 Series Dual Valve Gas Heating Controls Installation Data
Installation and service instructions for the Robertshaw 720 Series Convertible/Step Opening Dual Valve Gas Heating Controls, including specifications, wiring, operation, and troubleshooting.
Préview Guide de référence croisée des vannes à gaz Robertshaw
Un guide complet des vannes à gaz Robertshaw, incluant un outil de référencement pour des milliers de pièces. Ce document détaille différents modèles, tels que les vannes manuelles, hydrauliques, combinées 24 V et 2 S.tage, diaphragme, volume de lignetage et vannes à gaz millivolts, fournissant des spécifications, des numéros de modèle et des applications.
Préview Robertshaw Gas Water Heater Control Installation and Safety Guide
Comprehensive guide for the safe installation and servicing of Robertshaw gas water heater controls, emphasizing precautions to prevent fire, explosion, and injury. Includes detailed operational instructions and troubleshooting tips.
Préview Manuel d'utilisation du Robertshaw RS8110
Manuel d'utilisation du thermostat Robertshaw RS8110, couvrant l'installation, le fonctionnement, le réglage de la température, l'étalonnage et les désignations des bornes.
Préview Thermostat numérique Robertshaw 9405 - Caractéristiques, spécifications et guide de remplacement
Complet surview of the Robertshaw 9405 digital thermostat, highlighting its large backlit display, advanced features like compressor protection and freeze protection, technical specifications, and compatibility with various HVAC systems. Includes installation benefits and shipping details.
Préview Robertshaw 4350 Commercial Gas Thermostat Selection Guide
A step-by-step guide to identifying and selecting the correct Robertshaw 4350 BJ Gas Thermostat for commercial applications, covering control types, outlet configurations, mounting, and pilot settings.