1. Introduction
Thank you for choosing the TOOWELL Motion Sensor Ceiling Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light fixture. Please read this manual thoroughly before use to ensure safe and efficient operation. Keep this manual for future reference.
2. Produit terminéview
Caractéristiques principales
- Upgrade Daylight/Night Mode: Slide the switch to turn photocell sensor on/off. Under Daylight mode, motion motivated light on all day long. Under Daylight/Night mode, the light only activates at night and turns off automatically after 20 seconds.
- Motion Sensored: Built-in PIR infrared motion detector with 120-degree detection angle. Instantly turns on when it detects motion from up to 20 feet away.
- Luminosité: Super bright 400 Lumens with 80 pcs bright & long life-span SMD2835 LEDs. Provides wide coverage (300 sqft) with a frosted lamp cover to soften light.
- Energy Efficient Battery Powered: Requires 4 D-cell batteries (not included). Designed for efficiency, providing more than 6 months of light on one set of batteries.
- Sans fil et facile à installer : No electricity required, quick installation in less than 5 minutes. Ideal for lighting up closets, pantries, stairways, sheds, porches, and storage rooms.
Qu'y a-t-il dans la boîte
- 1 x Battery powered ceiling light
- Mounting hardware (screws, anchors, fixing plug)
- Les piles ne sont PAS incluses.
Images du produit
3. Configuration et installation
The TOOWELL Motion Sensor Ceiling Light is designed for quick and easy installation without the need for electrical wiring. Follow these steps:
- Prepare the Light: Gently twist the back plate of the light counter-clockwise to detach it from the main light unit.
- Installer les piles : Insert 4 D-cell batteries (not included) into the battery compartment, ensuring correct polarity.
- Reattach Back Plate: Align the back plate with the light unit and twist clockwise to secure it.
- Monter la plaque de base : Choose a desired location on the ceiling or wall. Use the included screws and anchors to securely mount the base plate.
- Fixez le module d'éclairage : Align the light unit with the mounted base plate and twist clockwise until it clicks into place.
- Retirez le film protecteur : Kindly note that a blue protective film is stuck on the silver part of the light to keep it clean. You can tear this film off before use for optimal appearance.
4. Mode d'emploi
Your TOOWELL Motion Sensor Ceiling Light offers two operating modes:
- Mode lumière du jour : Slide the switch on the light to the 'Daylight' (sun icon) position. In this mode, the motion sensor will activate the light whenever motion is detected, regardless of ambient light conditions (day or night). The light will turn off automatically after 20 seconds of no motion.
- Daylight/Night Mode: Slide the switch on the light to the 'Daylight/Night' (moon icon) position. In this mode, the motion sensor will only activate the light when motion is detected in low-light or dark conditions (at night). The light will turn off automatically after 20 seconds of no motion.
The built-in PIR infrared motion detector has a 120-degree detection angle and can detect motion from up to 20 feet away.
5. Entretien
- Remplacement de la batterie : When the light begins to dim or fails to activate, it's time to replace the batteries. Follow the steps in the 'Setup and Installation' section to safely replace the 4 D-cell batteries.
- Nettoyage: To clean the light fixture, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
- Durée de vie de la LED: The integrated LED lights are designed for a long lifespan and do not require replacement.
6. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas. | 1. Les piles sont déchargées ou mal installées. 2. Light mode is set incorrectly for ambient light conditions. 3. Aucun mouvement détecté à proximité. | 1. Remplacez les piles et assurez-vous de respecter la polarité. 2. Check the Daylight/Night mode switch. If it's too bright for Night mode, switch to Daylight mode. 3. Ensure motion is within 20 feet and 120-degree detection angle. |
| La lumière reste allumée en permanence. | 1. Mouvement continu détecté. 2. Light mode is set to 'Daylight' in a constantly bright area. | 1. Assurez-vous qu'aucun mouvement continu ne se trouve dans la zone de détection du capteur. 2. If in a bright area, switch to 'Daylight/Night' mode so it only activates in darkness. |
| La lumière est faible. | Les piles sont faibles. | Replace all 4 D-cell batteries. |
| Motion sensor is not responsive. | 1. Le capteur est obstrué ou sale. 2. Incorrect installation height. | 1. Clean the sensor lens with a soft cloth. Ensure no objects are blocking the sensor. 2. Ensure installation height is within recommended range (3-5m / 9.8-16.4ft). |
7. Spécifications
| Spécification | Valeur |
|---|---|
| Marque | TROP BIEN |
| Modèle | Update Daylight Motion Sensor Light |
| Type de source lumineuse | LED (SMD2835) |
| Luminosité | 400 lumens |
| Température de couleur | 5000 Kelvin |
| Source d'énergie | 4 D-cell Batteries (Not Included) |
| Angle du capteur de mouvement | 120 degrés |
| Plage de détection de mouvement | Jusqu'à 20 pieds |
| Minuterie d'arrêt automatique | 20 secondes (après l'arrêt complet du mouvement) |
| Dimensions du produit | 7.5"D x 1.8"H (7.5"L x 7.5"W x 1.8"H) |
| Poids de l'article | 14.4 onces |
| Matériel | Acrylonitrile butadiène styrène (ABS) |
| Type d'installation | Plafonnier |
| Utilisation intérieure/extérieure | Utilisation en intérieur uniquement |
8. Garantie et assistance
Informations sur la garantie
Specific warranty details for the TOOWELL Motion Sensor Ceiling Light are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact the manufacturer directly.
Assistance clientèle
If you encounter any issues or have questions not covered in this manual, please contact TOOWELL customer support. You can typically find contact information on the product packaging, the seller's page on the retail platform, or the official TOOWELL website.
When contacting support, please have your product model number (Update Daylight Motion Sensor Light) and purchase details (e.g., order number, date of purchase) ready to assist with faster service.
