Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of the APIELE 10 Amp 19mm Latching Push Button Switch. This high-quality metal switch is designed for various applications, including automotive, motorcycle modification, and control equipment.
Consignes de sécurité
- Assurez-vous que l'alimentation électrique est coupée avant toute installation ou opération de maintenance afin d'éviter tout risque d'électrocution.
- Vérifier le voltage and current ratings match your application to avoid damage to the switch or connected devices.
- Do not exceed the specified 10 Amp current rating or 12V operating voltage.
- Handle with care to avoid damaging internal components.
- En cas de doute sur une étape de l'installation, consultez un électricien qualifié.
Produit terminéview
The APIELE 10 Amp 19mm Latching Push Button Switch features a durable metal construction and an integrated LED ring. It is designed for reliable performance in various environments.
Caractéristiques principales :
- Latching Operation: Push once for ON, push again for OFF.
- Courant nominal élevé : 10 Amps.
- Éclairage LED : 12V LED ring for status indication.
- Construction durable : High-quality metal material.
- Étanchéité IP65 : Suitable for wet or dusty environments.
- Longue durée de vie : Electrical life of 200,000 times, mechanical life of 1,000,000 cycles.
Composants:
The product includes the push button switch and a connector for wiring.
- 1 x Latching Push Button Switch
- 1 x Connector with pre-attached wires
Figure 1: APIELE 10 Amp 19mm Latching Push Button Switch (Red LED, Silver Stainless Steel).
Figure 2: Various angles of the APIELE push button switch, showcasing sa conception robuste.
Figure 3: Comparison highlighting the larger press part and stronger contact terminals of the new design (right) compared to the old design (left).
Figure 4: Illustration of the switch's durability, rated for 200,000 press times and 40,000 hours of lamp vie.
Figure 5: Visual representation of the IP65 waterproof protection, indicating suitability for wet or dusty environments.
Caractéristiques
| Spécification | Valeur |
|---|---|
| Numéro de modèle | GQ19AF-10EZ |
| Taille du trou de montage | 19 mm (3/4 pouce) |
| Mode de fonctionnement | Latching (ON-OFF) |
| Configuration des contacts | 1NO (Normalement ouvert) |
| Évaluation actuelle | 10 Amps |
| Vol d'exploitationtage | 12 Volts (for LED) |
| Degré de protection | Étanchéité IP65 |
| La vie électrique | 200,000 fois |
| Durée de vie mécanique | 1,000,000 cycles |
| Matériau de la coque | Acier inoxydable (argenté) |
| Type de terminal | Vis |
| Dimensions du produit | 1.57 x 0.39 x 1.18 pouces |
Figure 6: Detailed technical specifications and dimensions of the switch.
Configuration et installation
Follow these steps for proper installation of your APIELE Latching Push Button Switch.
Schéma de câblage :
The switch comes with a pre-wired connector for ease of installation. Refer to the diagram below for pin assignments:
- Fil rouge : Positive LED Pin "+"
- Fil noir : Negative LED Pin "-"
- Fil bleu: Normal Open Pin
Figure 7: Wiring diagram showing the function of each colored wire on the connector.
Étapes d'installation :
- Préparer le trou de montage : Drill a 19mm (3/4 inch) diameter hole in the desired mounting surface.
- Insérer un commutateur : Insert the switch body into the prepared hole from the front.
- Fixer avec un écrou : Thread the securing nut onto the switch body from the back and tighten it to hold the switch firmly in place.
- Connecter le câblage : Attach the provided connector to the switch terminals. Ensure correct polarity for the LED function.
Figure 8: Visual guide for the installation process of the push button switch.
Video 1: This video demonstrates the features and installation of the 10 Amp Latching Push Button switch, including its waterproof capabilities and various applications.
Mode d'emploi
The APIELE Latching Push Button Switch operates with a simple ON-OFF mechanism.
- To turn on the connected device, press the button once. The LED ring will illuminate, indicating the switch is in the ON state.
- To turn off the connected device, press the button again. The LED ring will turn off, indicating the switch is in the OFF state.
Video 2: This video showcases the functionality of the 10 Amp 19mm Latching/Momentary Push Button Switch, demonstrating its use in various applications like automotive dashboards and coffee machines.
Applications :
This versatile switch is suitable for a wide range of applications, including but not limited to:
- Automobile and motorcycle modifications
- Control equipment switch modifications
- Doorbell buttons
- SOS buttons
- Elevator buttons
- Appareils électroménagers
Figure 9 : Examples of common applications for the APIELE push button switch, including doorbell, car, and elevator buttons.
Entretien
The APIELE Latching Push Button Switch is designed for minimal maintenance due to its durable construction and IP65 waterproof rating.
- Nettoyage: Wipe the switch surface with a soft, damp Chiffon. Évitez d'utiliser des nettoyants abrasifs ou des solvants qui pourraient endommager la finition ou les composants internes.
- Inspection: Vérifiez périodiquement les connexions électriques pour vous assurer qu'elles sont bien fixées et exemptes de corrosion.
- Protection de l'environnement : While waterproof, prolonged submersion is not recommended. Ensure the mounting area is properly sealed if exposed to extreme moisture.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Switch does not activate/deactivate device. | Incorrect wiring; Loose connection; No power to circuit; Faulty device. | Check wiring against diagram (Figure 7); Ensure all connections are secure; Verify power supply to the circuit; Test the connected device independently. |
| La LED ne s'allume pas. | Incorrect LED wiring polarity; No power to LED circuit; Damaged LED. | Check LED wire polarity (Red for +, Black for -); Verify 12V power supply to LED pins; If LED is damaged, the switch may need replacement. |
| Switch feels loose after installation. | Mounting nut not tightened sufficiently. | Tighten the securing nut on the back of the switch. |
Garantie et assistance
APIELE products are manufactured to high standards. For any issues or support inquiries, please contact APIELE Electric directly through their official channels or the retailer from whom the product was purchased.
Visitez le APIELE Store on Amazon pour plus d'informations et les options de contact.
