Manuel d'utilisation de la meuleuse d'angle Flex LBE 17-11 125

1. Produit terminéview

The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.

• Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
• Frein mécanique : Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
• Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
• Moteur haute capacité : Designed for high load capacity and efficiency, delivering strong power output.
• Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
• Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
• Conception ergonomique : Compact and ergonomic form for comfortable handling.
• Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
• SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.

2. Consignes de sécurité

Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.

Sécurité générale

• Portez toujours un équipement de protection individuelle (EPI) approprié, notamment des lunettes de sécurité, une protection auditive, des gants et un masque anti-poussière.
• Assurez-vous que la pièce est solidement clampédité avant l'opération.
• Keep hands clear of rotating parts and the cutting/grinding area.
• N'utilisez pas l'outil dans des atmosphères explosives, comme en présence de liquides, de gaz ou de poussière inflammables.
• Gardez les enfants et les spectateurs éloignés lorsque vous utilisez un outil électrique.

Sécurité électrique

• Assurer l'alimentation voltage correspond à la valeur nominale indiquée sur la plaque signalétique de l'outil.
• Ne pas malmener le cordon. Ne jamais utiliser le cordon pour transporter, tirer ou débrancher l'outil électrique. Tenir le cordon éloigné de la chaleur, de l'huile, des bords tranchants ou des pièces mobiles.
• Si vous utilisez un outil électrique dans une publicitéamp l'emplacement est inévitable, utilisez une alimentation protégée par un dispositif à courant résiduel (RCD).

Sécurité spécifique des meuleuses d'angle

• Always use the protective guard. Ensure it is correctly positioned and securely fastened.
• Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
• Never use cutting discs for side grinding.
• Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
• Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.

3. Composants et fonctionnalités

Composants clés :

1. Corps principal : Houses the motor, electronics, and gearbox.
2. Garde de protection : Adjustable, tool-free guard for user protection.
3. SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
4. Bouton de verrouillage de la broche : For easy disc changes.
5. Commutateur à glissière : Lockable for continuous operation.
6. Speed Selection Dial: For variable speed control (see Figure 2).
7. Bouches d'aération : For motor cooling and dust expulsion.

4. Installation

Attaching the SoftVib Handle

The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.

Mounting the Protective Guard

The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.

Installing the Grinding/Cutting Disc

1. Unplug the tool from the power supply.
2. Appuyez sur le bouton de verrouillage de la broche et maintenez-le enfoncé.
3. Place the inner clampbride sur la broche.
4. Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
5. Visser le clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
6. Relâchez le bouton de verrouillage de la broche.

5. Mode d'emploi

Mise sous/hors tension

• To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
• To switch off, release the slide switch. If locked, press the rear part of the switch to release it.

Contrôle de vitesse variable

The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.

Using the Mechanical Brake

The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.

Working with the Grinder

• Tenez toujours fermement le broyeur à deux mains.
• Allow the tool to reach full operating speed before contacting the workpiece.
• Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
• For cutting, use a slight rocking motion to prevent the disc from binding.
• Be mindful of sparks and debris. Direct them away from yourself and others.

6. Entretien

Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.

Nettoyage

• Débranchez toujours l'outil avant de le nettoyer.
• Nettoyez régulièrement les fentes d'aération pour éviter l'accumulation de poussière, qui peut entraîner une surchauffe. Utilisez de l'air comprimé si possible.
• Essuyez l'extérieur de l'outil avec de l'eau.amp tissu. N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs.

Balais de carbone

The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.

Stockage

Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.

7. Dépannage

8. Spécifications

9. Garantie et assistance

Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.

Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex websur votre site ou sur l'emballage de votre produit.