Introduction
The NZXT H710 is an ATX PC gaming case designed for builders seeking enhanced cable management, tempered glass aesthetics, and water-cooling readiness. This case incorporates a patented cable management system, removable fan/radiator mounting brackets, and user-friendly drive trays. Key updates include a front-panel USB-C connector supporting high-speed USB 3.1 Gen 2 devices and a tempered glass side panel that installs with a single thumbscrew.
Figure 1 : Face avant view of the NZXT H710 ATX PC Gaming Case.
Installation
Suivez ces étapes pour la configuration initiale et l'installation des composants :
- Déballage: Retirez délicatement le boîtier de son emballage. Vérifiez qu'il n'a pas subi de dommages liés au transport.
- Accès à l'intérieur : The tempered glass side panel is secured with a single thumbscrew. Loosen the thumbscrew and gently open the panel to access the interior.
- Installation de la carte mère : Install your Mini-ITX, MicroATX, ATX, or EATX motherboard onto the standoffs. Ensure all screws are tightened securely.
- Gestion des câbles: Utilize the patented cable routing kit with pre-installed channels and straps located behind the motherboard tray to organize power supply and data cables. This ensures a clean interior and optimal airflow.
- Installation du lecteur : Install 3.5-inch and 2.5-inch storage drives into the easy-to-use drive trays.
- Circuit de refroidissement: The case supports various cooling configurations. Two Aer F120mm fans are included for optimal internal airflow. Removable fan/radiator mounting brackets simplify the installation of either closed-loop or custom-loop water cooling systems. The removable bracket is designed for radiators up to 240mm.
- Connexions du panneau avant : Connect the front I/O USB Type-C port and other front panel connectors to your motherboard. The H710 features a consolidated front panel connector for ease of installation.
Figure 2 : Interne view highlighting cable management and drive bays.
Figure 3: Tempered glass side panel open for component access.
Vidéo 1 : Un overview of the NZXT H-Series cases, demonstrating key features and internal layout relevant to the H710 model.
Opérationnel
Once all components are installed and connected, close the side panel and secure it with the thumbscrew. Connect your peripherals and power cable. The case is designed for optimal airflow to keep your components cool during operation. The front panel and PSU intakes include removable filters to prevent dust buildup.
Figure 4: Top I/O ports for convenient connectivity.
Entretien
Un entretien régulier contribue à assurer la longévité et les performances des composants de votre PC.
- Nettoyage du filtre à poussière : Periodically remove and clean the dust filters located on the front panel and PSU intake. This prevents dust accumulation and maintains optimal airflow.
- Nettoyage intérieur: Use compressed air to gently remove dust from internal components. Ensure the system is powered off and unplugged before cleaning.
- Nettoyage extérieur : Essuyez les surfaces extérieures avec un chiffon doux, damp Utilisez un chiffon. Évitez les nettoyants abrasifs qui pourraient endommager la finition ou le verre trempé.
Dépannage
If you encounter issues with your NZXT H710 case, consider the following:
- Problèmes de mise sous tension : Ensure all power cables, including the 24-pin ATX, 8-pin CPU, and GPU power connectors, are securely seated. Verify the front panel power switch cable is correctly connected to the motherboard.
- Mauvaise circulation d'air/Températures élevées : Check that all case fans are spinning correctly. Ensure dust filters are clean and not obstructed. Verify that there is adequate space around the case for air intake and exhaust.
- Front Panel Port Malfunction: If a USB or audio port on the front panel is not working, check the internal cable connections to the motherboard. Ensure they are fully seated and correctly oriented.
- Panneau en verre trempé : Ensure the tempered glass side panel is properly aligned and the thumbscrew is tightened to prevent accidental detachment.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | NZXT |
| Nom du modèle | CA-H710B-B1 |
| Type de cas | Mid Tower |
| Couleur | Noir |
| Matériel | SGCC Steel and Tempered Glass |
| Compatibilité de la carte mère | Mini-ITX, MicroATX, ATX, EATX |
| Dimensions de l'article (P x L x H) | 19.45"P x 9.06"L x 20.31"H |
| Poids de l'article | 14 kilogrammes |
| Total Expansion Slots | 7 |
| Total USB 2.0 Ports | 2 |
| Total USB 3.0 Ports | 1 |
| Méthode de refroidissement | Air, eau |
| Number of Fans (Included) | 2 |
| Espace maximal du GPU | 413 mm |
| Support de radiateur (avant) | 360 mm |
| Support de radiateur (supérieur) | 360 mm |
| Support de radiateur (arrière) | 140 mm |
Figure 5: NZXT H710 case dimensions.
Garantie
The NZXT H710 ATX PC Gaming Case comes with a Garantie de 2 ans À compter de la date d'achat, veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie. La garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation. Elle ne couvre pas les dommages causés par une mauvaise utilisation, un accident, une modification ou une réparation non autorisée.
Soutien
For further assistance, technical support, or warranty inquiries, please visit the official NZXT website or contact their customer service department. Detailed contact information can typically be found on the product packaging or the official NZXT support page.
