1. Introduction
The Lascar EL-CC-1-001 is a pre-configured, cost-effective data logger designed for monitoring chilled goods. This device simplifies temperature tracking in sensitive environments by providing clear indications of alarm conditions and easy data retrieval. Each logger is ready for immediate use with pre-set high and low temperature alarms.
2. Installation
The EL-CC-1-001 data loggers are designed for simplicity and come pre-configured for monitoring chilled goods with the following alarm thresholds:
- Alarme haute : 8°C
- Alarme basse : 2°C
To begin logging, simply press the button located on the device. The logger will immediately start recording temperature data. During the logging session, you can press the button again to check the status LEDs, which will indicate if any alarm conditions have been exceeded.
Figure 1: Lascar EL-CC-1-001 data logger. The label clearly indicates 'ALARMS: HIGH 8°C, LOW 2°C' and 'EasyLog CHILLED GOODS'. A green circuit board with gold contacts is visible on the right side, indicating the USB connector.
3. Fonctionnement
Once activated by pressing the button, the data logger will continuously record temperature data according to its internal settings. The status LEDs provide real-time feedback:
- A green LED indicates that the temperature is within the acceptable range.
- A red LED indicates that the temperature has exceeded either the high or low alarm threshold.
Ensure the logger is placed in the desired monitoring location for the duration of the logging session.
4. Récupération des données
After the logging session is complete, or when you need to download the recorded data, follow these steps:
- Carefully tear open the IP67-rated plastic wallet to expose the built-in USB connector.
- Plug the USB connector into an available USB port on your Windows PC.
- Téléchargez et installez gratuitement EasyLog CC software for Windows if you haven't already.
- Launch the EasyLog CC software. The software will automatically detect the connected data logger.
- Follow the on-screen prompts within the software to download and graph your temperature data. The software allows you to view, analyze, and export the data.
- After downloading, you can prepare your logger for its next deployment, as it is designed for reusability.
5. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | EL-CC-1-001 PK10 |
| Marque | Matelot indien |
| Seuil d'alarme élevé | 8°C |
| Seuil d'alarme bas | 2°C |
| Indice de protection IP (Ingress Protection) | IP67 (when sealed in plastic wallet) |
| Compatibilité logicielle | EasyLog CC software for Windows |
| Dimensions du colis | 2 x 2 x 2 pouces |
| Poids de l'article | 3.2 onces |
| Fabricant | LASCAR ELECTRONICS INC |
6. Dépannage
- Logger not starting: Ensure the button is pressed firmly until the status LED indicates activation.
- Data not downloading: Verify the USB connection. Ensure the EasyLog CC software is installed and running. Try a different USB port.
- Relevés de température incorrects : Ensure the logger is placed in a location representative of the goods being monitored and away from direct heat sources or extreme cold spots.
- Alarm LED constantly on: This indicates that the temperature has gone outside the pre-set 2°C to 8°C range. Review your data to identify when and for how long the excursion occurred.
7. Garantie et assistance
For warranty information, technical support, or further assistance with your Lascar EL-CC-1-001 data logger, please refer to the official Lascar Electronics webou contactez directement leur service client. Conservez votre reçu d'achat pour toute réclamation sous garantie.
