Introduction
This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.
The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.
Consignes de sécurité
Respectez toujours les consignes de sécurité suivantes afin d'éviter les chocs électriques, les incendies ou les blessures :
- Assurez-vous que l’alimentation électrique est débranchée avant l’installation ou la maintenance.
- L'installation doit être effectuée par un électricien qualifié, conformément aux normes électriques locales.
- N'exposez pas le lamp à une humidité excessive ou à des températures extrêmes.
- Do not attempt to open or modify the lamp housing, as this may void the warranty and pose a safety risk.
- Conserver les matériaux d’emballage hors de portée des enfants.
Contenu du colis
Vérifiez que tous les composants sont présents et non endommagés :
- Beghelli 19432 LED Emergency Lamp unité
- Integrated Li-Fe Battery
- Accessoires de montage (vis, chevilles)
- Manuel de l'utilisateur (ce document)
Configuration et installation
The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:
- Choisissez un emplacement : Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
- Préparez la surface de montage : Ensure the wall surface is clean, dry, and capable of supporting the lampson poids.
- Points de forage marqués : Utilisez le lamp's mounting holes as a template to mark the drilling points on the wall.
- Trous de forage : Drill holes at the marked points using an appropriate drill bit for the wall plugs.
- Insérer des chevilles murales : Insérez les chevilles fournies dans les trous percés.
- Montez le Lamp: Sécurisez le lamp Fixez-le au mur à l'aide des vis fournies. Assurez-vous qu'il soit bien fixé.
- Connecter l'alimentation : Connectez le lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
- Charge initiale: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.
Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.
Mode d'emploi
The Beghelli 19432 operates automatically:
- Fonctionnement normal : When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
- Mode d'urgence: In the event of a power failure, the lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
- Retour à la normale : Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
- Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)
Entretien
Regular maintenance ensures the longevity and reliability of your emergency lamp:
- Nettoyage: Nettoyez le lampNettoyez l'extérieur avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
- Vérification de la batterie : Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
- Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
- Remplacement de la batterie : The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
- Lamp Remplacement: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.
Dépannage
Consultez le tableau ci-dessous pour connaître les problèmes courants et leurs solutions :
| Problème | Cause possible | Solution |
|---|---|---|
| Lamp does not illuminate during power outage. | Batterie non chargée ou défectueuse. Câblage incorrect. Lamp faute. | Assurez-vous lamp has been connected to power for at least 24 hours. Vérifiez les connexions de câblage. Si le problème persiste, contactez un technicien qualifié. |
| Lamp reste allumé en permanence. | Main power supply issue. Défaut interne. | Verify main power supply is stable. Disconnect and reconnect power. If issue persists, contact qualified service personnel. |
| Reduced illumination duration. | Dégradation de la batterie. Charge insuffisante. | Perform annual full discharge/recharge cycle. Ensure continuous power supply for charging. Battery may need replacement by qualified personnel. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Beghelli customer support.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | 19432 |
| Marque | Beghelli |
| Source de lumière | DIRIGÉ |
| Flux lumineux | 1200 lumens |
| Consommation d'énergie | 24 watts |
| Type de batterie | Li-Fe (Lithium Iron) |
| Matériel | Policarbonato (Polycarbonate) |
| Couleur | Blanc |
| Domaine d'application | Commercial, Emergency Exit |
| Type de montage | Wall Mount (Parete) |
| Type de commutateur | Automatique |
| Premier disponible | 16 mai 2019 |
Garantie et assistance
For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.
For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli website ou sur l'emballage du produit.
Informations sur le recyclage : For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.
