TrolMaster DSH-2

Manuel d'utilisation de la station de mesure d'humidité TrolMaster DSH-2 240 V

Model: DSH-2

1. Produit terminéview

The TrolMaster DSH-2 is a 240V Humidity Device Station designed to provide precise humidity control within a Hydro-X Control System. This device acts as a relay, allowing the Hydro-X system to manage external humidity-related equipment, such as humidifiers or dehumidifiers, by switching their power on or off based on programmed settings.

TrolMaster DSH-2 240V Humidity Device Station front view

Figure 1 : Face avant view of the TrolMaster DSH-2 240V Humidity Device Station, showing the 240V outlet and indicator lights.

TrolMaster DSH-2 240V Humidity Device Station side view

Figure 2 : Côté view of the TrolMaster DSH-2 240V Humidity Device Station, showing the power plug.

2. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

  • 1x DSH-2 240V Humidity Device Station
  • 1x RJ12 Cable (for connection to Hydro-X system)
TrolMaster DSH-2 product packaging

Figure 3: Packaging of the TrolMaster DSH-2, indicating package contents.

3. Instructions de configuration

Follow these steps to set up your DSH-2 Humidity Device Station:

  1. Connexion électrique : Plug the DSH-2 device into a standard 240V power outlet. Ensure the outlet is properly grounded.
  2. Connect to Hydro-X System: Use the provided RJ12 cable to connect the DSH-2 to an available 'Device' port on your TrolMaster Hydro-X Control System. The Hydro-X system will automatically detect the DSH-2.
  3. Connect Humidity Device: Plug your 240V humidifier or dehumidifier into the outlet on the DSH-2.
  4. Configuration: Refer to your Hydro-X Control System manual for instructions on how to configure the humidity settings and assign the DSH-2 to a specific humidity control zone.
Diagram showing DSH-2 connection to Hydro-X system

Figure 4: Connection diagram illustrating how the DSH-2 (Humid Device Stations H1, H2) connects to the Hydro-X Control System's device ports.

4. Mode d'emploi

Once connected and configured with your Hydro-X Control System, the DSH-2 operates automatically based on the parameters set in the Hydro-X system. The DSH-2 acts as a switch, turning the connected humidity device on or off to maintain the desired humidity levels.

  • Voyants lumineux : Observe the indicator lights on the DSH-2 for operational status. Typically, a green light indicates power and proper connection.
  • Controle du système: All humidity setpoints, differentials, and schedules are managed directly through the Hydro-X Control System interface.

5. Entretien

The DSH-2 Humidity Device Station requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

  • Nettoyage: Periodically wipe the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Environnement: Ensure the device is operated in a dry environment, free from excessive dust or moisture.
  • Intégrité du câble : Regularly inspect the RJ12 cable and power cord for any signs of damage. Replace if necessary.

6. Dépannage

If you encounter issues with your DSH-2, consider the following troubleshooting steps:

  • Pas d'alimentation : Ensure the DSH-2 is securely plugged into a live 240V outlet. Check the circuit breaker.
  • Not Detected by Hydro-X: Verify that the RJ12 cable is firmly connected to both the DSH-2 and an active 'Device' port on the Hydro-X system. Try a different RJ12 cable or port.
  • Humidity Device Not Responding: Confirm that the humidity device (humidifier/dehumidifier) plugged into the DSH-2 is powered on and functioning correctly independently. Check the settings for the DSH-2 within the Hydro-X Control System.
  • Mesures d'humidité incorrectes : This is typically related to the humidity sensor connected to the Hydro-X system, not the DSH-2 itself. Refer to your Hydro-X system manual for sensor troubleshooting.

If problems persist, contact TrolMaster customer support or your authorized dealer.

7. Spécifications

FonctionnalitéSpécification
Dimensions du produit3.35 x 3.15 x 3.54 pouces
Poids de l'article11.84 onces
Numéro de modèleDSH-2
FabricantMaître Trol
CouleurNoir
Type de montageDessus de table
Indice de température supérieur122 degrés Fahrenheit
Pays d'origineChine

8. Informations sur la garantie

For detailed warranty information regarding your TrolMaster DSH-2, please refer to the official TrolMaster website or contact your authorized dealer. Warranty terms and conditions may vary and are subject to the manufacturer's policy at the time of purchase.

9. Assistance clientèle

If you require further assistance or have questions not covered in this manual, please contact TrolMaster customer support through their official website or the contact information provided by your retailer. When contacting support, please have your product model (DSH-2) and purchase details ready.

TrolMaster Official Website: www.trolmaster.com

Documents connexes - DSH-2

Préview Système de contrôle environnemental TrolMaster Hydro-X HCS-1 - Fiche technique complète
Informations détaillées sur le système de contrôle environnemental TrolMaster Hydro-X HCS-1, conçu pour les environnements intérieurs et les serres automatisés. Ce document couvre les spécifications, les capteurs, le contrôle de l'éclairage, la connectivité du système et l'intégration des modules.
Préview Fiche technique GCS-1 : Système de contrôle de serre Green-X de TrolMaster
Ce document présente les spécifications techniques et les détails du système de contrôle de serre TrolMaster GCS-1 Green-X. Découvrez ses fonctionnalités pour une gestion précise de l'irrigation, du climat, du CO2 et de l'éclairage, la compatibilité des capteurs, le contenu de l'emballage et les schémas de connexion pour des conditions optimales en serre.
Préview Station de relais TrolMaster DSR-1 25A - Spécifications techniques et guide de connexion
Informations détaillées sur le boîtier relais TrolMaster DSR-1 25A, y compris les spécifications, les indicateurs d'état LED et les schémas de connexion pour les systèmes de contrôle horticoles.
Préview Trolmaster DCC-1 Dual Condition Controller Installation Guide
Step-by-step installation guide for the Trolmaster DCC-1 Dual Condition Controller, explaining its features, wiring, and interlock function for environmental control systems.
Préview Station sans fil TrolMaster TWS-1 : Guide de l’utilisateur et spécifications
Guide complet de la station sans fil TrolMaster TWS-1, couvrant l'installation, le fonctionnement, le couplage avec le contrôleur Hydro-X Pro, les spécifications et les informations réglementaires.
Préview Guide d'installation Trolmaster DCC-1
Guide d'installation du contrôleur de conditions doubles Trolmaster DCC-1, détaillant ses caractéristiques, sa compatibilité avec les modules TrolMaster DS et les instructions d'installation étape par étape pour les systèmes de contrôle environnemental.